Counting matching models…
Three layer panel plus rotary switch mounting plate. Panels designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
This is my model of the Airbus A320 Transponder Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS!
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
Make the transponder of your dreams! The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code is under…
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
Replaces the stock front bumper support allowing for mounting of MRT transponder. (might work with my laps Transponder haven’t tested) I recommend pre threading the holes before mounting. When bolting into car I find it easier to line it…
Über die Jahre hat sich herausgestellt, dass die Gummierung des Tasters von SimonsVoss Transpondern sich häufig auflöst. Erste Risse oder Schnitte sind der Anfang, irgendwann ist die Gummierung ganz weg und die Elektronik liegt frei, was…
This is a friction fit MyLaps Transponder mount for RC vehicles, notably the Slash (derivative chassis) and the Tekno vehicles. Printing: Infill: 42% or similar because it's the answer to everything Filament: KVP ABS Layer Height: 0.2…
The key cover is printed with Recreus Filaflex 60A Green filament, but similar flexible filament will probably work too. The cone bit in the middle can be removed if you want a flat surface. The key cover is held in place with some…
Transponder holders for Mylaps RC4, RC4 Hybrid, and RC4 Pro transponders can be mounted in the front of your Mugen MTC2. Please note that I have not tested this on MTC2R, but it should work. For more info in swedish Buttyboys.se…
Better to print laid on a bigger part with the supports
This is a printable mount for an easylap transponder for a Mini Z. The screws I used are https://www.mcmaster.com/catalog/130/3435/92095A455
As a traveling man, I've found myself in various states with toll roads, and not many of them honor passes from other states. And with many states moving to the "Sticker" type transponders instead of the boxy transponders, I found a…
Mylaps pro Transponder holder. fit only for Pro. Helpful when you are yousing one Transponder for more than one car. Just put one holder in each car so the change is very fast and easy. depent what Material you are using you maybe have to…
RC (1/10th buggy, ...) racing. More and more people use a personal transponder to monitor their lap-times. When not racing but training a personal system can be very usefull. Lapmonitor produces a system for this purpose. (…
Ich habe für die Tamiya Chassis TT-01 und TT-02 eine Halterung für den WTS-Transponder entworfen. Ziel war es, den Transponder zum einen einfach am Chassis zu montieren und zum zweiten sollte die Möglichkeit bestehen, zwischen zwei oder…
I print these from PETG for additional durability. They mount to the servo by using longer screws in the stock location. I use a short M3 screw to hold the transponder. This holder works for both winged, and wingless configurations of the…
This is a two part FasTrak metro transponder holder that fits onto the circular shaft of my Toyota Matrix rear view mirror. I think this should be similar to Toyota Corolla's as well. Note that the fit around the rear view mirror shaft is…
Snap together case for a MRT mPTX transponder used in RC racing. Snap fit idea was from the following video - https://www.youtube.com/watch?v=pjtiWuGUnlI Print Settings Printer: Monoprice Maker Select Rafts: No Supports: No Resolution:…
Die Kunststoffteile sind durch das tragen in der Hosentasche gerissen. Dadurch lösten sie sich vom Metall-Schlüssel und dieser wäre beinahe verloren gegangen. UPDATE V2 Neu gestaltetes Modell hübscher und stabiler. Grund: Nach einem Jahr…
Print Settings Printer brand: XYZprinting Printer: da Vinci 1.0 Pro 3in1 Rafts: Yes Supports: Yes Resolution: 0,1 mm Infill: 40 % Filament brand: 1,75 mm Filament color: Black Filament material: ABS
This is a mount i made and have been using for the Mylaps RC4 Transponder i use on my Losi Nascar chassis. I used 2x M2.5x10mm screws to install it into the existing holes on the front splitter. the transponder fits great and is not to…
Front bumper broke at my Asso (Team Associated) RC car 1/10. No change to get a new one before our race so I designed one and here it is. I have designed 2 different covers, one original version and one with a special hole for our race…
Transponder case for a RCHourglass transponder. PCB was designed by AndreasM, this case fits that PCB. Info on RCHourglass can be found here: https://github.com/mv4wd/RCHourglass PCB Files: https://oshpark.com/shared_projects/xsPLwajU…
To print the single-piece model: Pause at layer 20 Insert key and transponder into slots Continue print
A couple simple but nice options for guards for your I-Laps transponder. A sleek and stylish cowl induction hood, or an aggressive 3 butterfly “bug catcher” scoop for that muscle flair.
I received an RFID sticker from my office for parking but I didn't want to stick it on my car, and would rather carry it with me. This design lets me stick it to a piece of paper, slot it directly in, and carry it with my keycard. The…
This is one of my first designs that I made to print in Fusion 360. It is designed to bolt around the front body mount posts of a Traxxas Slash 2WD R/C car. I printed it using PLA but you can use a more resilient filament if you desire.…
Transponder worn on the Starfleet Field Jacket in 2285 Wrath of Khan Era
I wanted to integrate my car key in my Keyport Slide but in order for it to actually be able to start the car, I had to find a solution to integrate the car's transponder chip in the Slide so I redesigned the original version of my RFID…
For details and accessories, please read here: https://www.printables.com/model/736214-multi-instrument-with-accessories Please note: Due to the low height of The KT76A, unfortunately there are no room for jump cables if Arduino Nano are…
este soporte queda muy bien pasa el transponder lap monitor JR por dentro con lo que queda muy bien justo pero entra
When making the Buttons for the transponder nfor A320 real size these are thebuttons to use, they have both colors inside, unfortunatly you still need to paint. Tested on Snapmaker U1
In the game, one of these was stolen and illegally taken to a bad timeline, where it was sending bad things to our reality. The final puzzle was to make the dangerous journey to deactivate it. I even set up a popup canopy as a time…
These are simple additions for the knobs on your WINCTRL Transponder to make them easier to turn. Unlike some of the other adaptive knobs I’ve designed, the construction of this particular panel does not allow for the knobs to be…
E-Z Pass Turnpike Transponder Holder. Riding a motorcycle on the turnpike, stopping at toll booths and digging around to pay the toll is time consuming and irritating. The E-ZPass Transponder keeps your ride safe and enjoyable. For the…
Gridfinity storage for a MyLaps TR2 transponder and its charging base. Charging base fitment is snug (I shaved some excess flashing off of my charging base to make the fitment a bit nicer) but both are held securely in place. Gridfinity…
This is a transponder mount for an MRT transponder to fit nicely into the Losi Nascar. Just add a bit of VHB on the bottom middle and a few screws and you're good to go. I used m1.6x5mm screws, because I had a pile of them.
Hi ich hab für den Elektronischen Schlüssel den wir auf der Arbeit Verwenden eine Hülle gebastelt in die man die Elektronik einsetzen kann. In diesem Post findet ihr ein Case in form einer ente und als Zusatz eine Ente mit Teufelshörnern.…
Eine weitere Hülle für den Simon Voss Transponder – diesmal im klassischen Gameboy-Look. Die Hülle wurde komplett selbst konstruiert und gibt dem Transponder ein etwas verspielteres Aussehen. Das Design orientiert sich an einem…
When making the Buttons for the transponder nfor A320 real size these are thebuttons to use, they have both colors inside, unfortunatly you still need to paint. Tested on Snapmaker U1
My two hobbies are 3D Printing and RC Car Racing. i wanted to combine the two in useful ways. I have been working on a "universal" minimalist mount for transponder.. and here is what I ended up with.. this design may change slightly to…
To print the single-piece model: Pause at layer 20 Insert key and transponder into slots Continue print
