Counting matching models…
This is more of a build log than direct instructions - I wanted to share design decision I made - maybe it will help someone in whatever they will design. However if you are crazy enough to build one - here you should find all the…
I've designed and printed a custom phone stand to address a common issue for taller gym-goers. Traditional phone holders on treadmills are often too low, which can be inconvenient. My design is specifically tailored for 'Life Fitness'…
Print Instructions: The large clamp part were printed at 40% infill clamps should be printed with the circular pattern facing the bed for best strength, causes thread to be a bit messy but will still work Tray and Tray Body 30% Bolts and…
I made a simple phone holder so I can watch shows while at gym without having to look down all the time. This holder fits the screen of TechnoGym treadmills (typically at LifeTime Fitness) and holds my iPhone 16 Pro in Apple leather case.…
The clip for the tether on my treadmill broke and I decided to design and build a replacement. I originally printed it with 20% infill and it worked fine, but I reprinted it with 100% and it feels a lot sturdier. Not too bad for my first…
These simple holders allow you to hold your tablet a bit higher on most treadmills and crosstrainers. I printed mine in TPU so that they dampen the vibrations and survive inside my gym bag.
Remixed to remove need for supports. Print Settings Printer: Geeetech A10M Rafts: No Supports: No Resolution: 0.2 Filament: GENERIC PETG / PLA Notes: Print Vertically Category: Replacement Parts
My fiancé bought a treadmill but it didn't come with a phone holder so she asked me to design a holder that would hang over the top of the treadmill dash. Thought I would make it “motivational" by embossing the famous Simpsons scene of…
This is a finger treadmill. It can exercise your fingers, and also be used as a fidget. It prints super easily, and can be assembled with superglue. Print Settings: Infill: 5% or higher Supports: None Material: Any Hard Material
wanted a tablet at eye level for my 2950 treadmill, so i made one. This clips on to the small gap on the top of the display. Fits a Samsung S7 tab, but should also work with a 10-11" ipad. Hope it works for you! Note you have to print 2…
My treadmill didn't have a nice place to hold a water bottle without it bouncing around while running. This fits on the arm of my treadmill and has a divot+holes to run a cable tie through to hold it firmly in place (see photo). I feel…
This is a simple tablet holder I designed for our Nordic Track T series 8 treadmill, it holds a tablet above the display. It works especially well if you put a piece of felt between it and the treadmill. I recommend printing with a brim…
This is a design to replace the broken original safety key for a "free spirit" treadmill, by dyaco. It has been tested to work perfectly. I printed this from PETG, though PLA would give more faithful detail, I expect the PETG to stand up…
When our old treadmill turned off intermittently, I looked into the cause. The key presses a micro switch which could not be modified, but the key was loose in the slot so vibration would cause the switch to deenergize the treadmill. I…
Created to custom fit the left-hand side tray on the HORIZON 7.0 AT STUDIO TREADMILL. This is a second version that has been refined after testing. Added padded foam to stop vibrations with some cups and fitted with double-sided tape.
This will clamp onto anything that is about 31.5mm X 56mm, at a 14 degree angle, and has totally rounded edges (like the arm of the TR150 treadmill). It is made to attach to the right (starboard) side of the treadmill from the perspective…
This is a design to replace the broken original safety key for a "free spirit" treadmill, by johnson.
Phone holder for treadmill with four different positions. Print instructions Category: Sport & Outdoors Summary Phone holder for treadmill with four different positions.
Pro-Form treadmill key. The inserted section measures 42 x 28 x 3.7mm and has two indents on the bottom. Print settings [.4 nozzle]: 0.2 layer height, 5 walls, 0 top/bottom layers, 0 infill, no supports
The Wife needed a place to place her bottles when working out, here is what we designed.
This model was designed specifically to fit the Mobvoi Home Treadmill Plus to provide a better viewing angle and to increase support for larger devices like tablets. This may fit other treadmill models if the mounting holes line up. PLA…
For this item to work, you will need 4 screws M4 40mm and 4pcs of M4 nut's. Printing profile: 0.2mm Wall loops: 6 Sparse infill density: 15 Sparse infill pattern: Adaptive cubic Support: tree (auto) Support Threshold: 10°
Treadmill clip with smooth edge and a little grip. Better if printed with PETG.
a colleague gave me a broken safety key
Treadmill repair part number 158835 It's a Latch pin housing, i design it using my caliper and an original broken parts recommand to use high infill to increase resistant of the parts
I find treadmills extremely boring, but it's can be a good way to get exercise. To help pass the time, I like to put youtube videos on while I'm running, but there's nowhere convenient to mount my phone. This holder is designed to clip…
Bracket to convert a C3354B3304 , 2.65 HP , Icon PN# M-190528, treadmill motor to a foot mount motor.
A replacement treadmill clip as it broke during a move.
This a simple tablet holder for the FYC JK8801F Folding Treadmill. The area for devices is far too small for a tablet to sit in landscape view, so I created this that slots into the existing device holder. I printed mine in PLA with 15%…
This is a quick and dirty model I made just to get something functional while I come up with a better plan. It works, but can definitely be optimized. As is, it is quite sturdy. I used an old ash slab to create a platform to work on my…
Source code is here https://github.com/gshimansky/scad-models/blob/master/treadmill-cupholder/cupholder.scad You need to install Round-Anything OpenSCAD library to render it. Printed using Duramic PLA+ 0.6 nozzle.
The original feet of this treadmill concentrate the weight in a very small area and easily wear holes in soft/foamy floor mats. This adapter is a snug fit around the original feet providing a greater area to spread the load thus leaving…
Hooks to hold a laptop/tablet on a treadmill. Guaranteed to fit a Sole F80 treadmill (as you can see in the photos), but should fit other models also. The hooks have "teeth" in the back designed to line-up and grab to the back grille for…
Phone Holder for Star Trac 8TRX and 8TR Treadmill
The Lifefitness treadmill endcaps can easily break off because they have long, injection molded screw inserts. This replacement press-fits into the end pipe and latches on. The right side is provided. To print the left side, scale it…
A mobile, tablet, iPad holder for the Reebok ZR8 treadmill. Printed with PLA/PETG 0.2mm layer height
A common complaint about treadmills is that the feet wear holes in mats and carpeting. The cause is the small diameter of the foot, putting a large load per area onto the mat. This adapter fits over the original foot and spreads the load…
I designed this bottle holder for a Toorx City Compact treadmill, but it might be compatible with other stuff, and it's mostly intended to be used with regular bike and runner water bottles. Although these vary a bit in diameter, so test…
Latch assembly to replace the broken on on my Proform treadmill. This one specifically is the XP 590S, may fit others.
Got that friend that thinks you want to hear (daily) about their gym experience that day?
Although on their website the Flexispot treadmill is shown being stored upright, the instructions state that resting it upright can damage the product. I believe this is because the power switch and socket stand slightly proud of the end…
Stand for use with a laptop or cellphone on the XTERRA TR150 treadmill. with laptop I use it with walking speeds. the device can hide the machine LCD. 2 stands needed. Printed on PLA has worked out well.
Designed this phone stand for my wife, to watch youtube while running on her treadmill Stand is designed for phone 78mm in width and 9mm thick. Fusion 360 files included, so feel free to adjust it to your needs Category: Mobile Phone
I created these so I could place a board across and use my treadmill as a standing desk. The model is just the left side, I import it into bambu slicer, clone it, and then mirror the cloned one on the x axis to get the right hand side. No…
The LifeSpan TR1200DT is an older generation treadmill for walking desks. It has two leveling feet at the front, which consist of a metal core and a plastic puck. The original ones seem to be cast, and might have been rubbery, but turned…
These TPU printed inserts fit the Nordic Track T-Series Treadmill to help reduce the annoying "cup rattling" sound that often occurs during exercise and provide a more comfortable and enjoyable workout experience.
I was disappointed with the quality of the shoes that came with my 1300$ Katwalk VR treadmill so I made my own attachments using those rubber “overshoe” ice cleats that way I can just wear my own shoes while I play. These pads are the…
3 peace clip mount for landscape mounting a phone on a treadmill. Designed for the HORIZON 7.0 AT STUDIO TREADMILL but will fit others.
Simple print. Around 20 min on my ender 3 pro.
shaft threads for a treadmill motor
The old Life Fitness treadmills models like the 9100, 9100HR and similar like the 9500 lack the possibility to conveniently hold your phone or tablet. Here are my 2 solutions for the matter. One clip that goes around the display and one…
Adjustable incline for Zipro treadmill
Printed in PLA, 20% infill. No supports needed.
This is mostly a concept design. I have not printed it on my XL yet. If you print this please be smart and wear PPE! Helmet, Knee Pads, Elbow Pads, etc. Also, probably print it at like 50% infill with plenty of shells. Idea is this would…
This is a cover for a security key (magnet) of a treadmill i've bought this weekend. It houses the magnet and has a small hole for tying a strap. It was tailor made for the one i've bought, but it might help you out as well.
A printable treadmill key with an embedded magnet (see below) that allows you to power your treadmill without using a wristband key. Requires a 20mm x 5.1mm (0.78" x 0.2") magnet (for example: https://a.co/d/apZZkp2 ). Works with any…
The fans on the Sole F85 Treadmill are completely worthless. At it's best possible setting half the air blows behind the monitor and the rest over your head (I am 6' tall). These direct the air at my chest where I want it. To use you have…
Treadmill phone shelf that can hold your phone, tablet or whatever you watch while running. This mount intentionally hides the screen on the treadmill as to hide how long or far you've been running.
My treadmill was missing the entire closing latch assembly. I ordered what I believed to be the full part but upon arrival discovered it was just the pin. Rather than attempt to find the part I designed a housing for it. The finish is a…
Settings: PETG Perimeters=8 Infill=Rectilinear, 100% Layer Height=0.2
My treadmill didn't come with any automatic lubrication system so I designed this system. A rubber hose was cut with small holes along one side, clamped to each side of the treadmill band and a funnel was mounted on the side of the band,…
Just a replacement wheel for my treadmill. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 20% Notes: Printed with 6 perimeters and 5 top and bottom layers. Category: Sport & Outdoors
A much better version of the shoe clips I uploaded a while ago, these do not require you to attach them to a set of rubber snow cleats and can be clipped to your shoes directly. I wear size 11 so these clips are sized to me.…
Phone in the picture: iPhone 15 Pro. It will fit even with case. Supports both portrait and landscape orientation. Materials: TPU recommended - soft, will help prevent slipping
I bought a tread mill and there was no nice way of routing the power cord along the leg so that it wouldn't get squished.
I created this for my wife's treadmill to hold her Galaxy Tab 10 tablet while she uses her treadmill. Nordictrack sells a molded plastic tablet holder for over $100. After a few hours of design and a night of printing I have a working…
Spare part for Kettler treadmill. Holder for a landing trim cover.
Can be printed as in (square side of circle down) and needs supports.
Okay this one's a very specific model that most likely won't have a use for anyone else, but I thought I'd document the end result here anyways.. So my treadmill (Tunturi T60) has an built-in pad stand which works fine, but I had some…
Sick of using your foldable treadmill and having the spring-loaded bolt scrape against you? This insert can be used to keep the bolt out of the way! The insert was designed to fit the ProForm CC300 treadmill but the design is parametric…
To hold properly a macbook on a Domyos T900 treadmil and have the screen in front of you when you run.
This model is sized for a Samsung Galaxy S23+ with a slim case (Urban Armor Gear Civilian Series), but it may fit others as well. See images for size (measurements are in inches). It fits in the Life Fitness Treadmills with the iPod…
I made a replacement foot for the Technogym run900 treadmill at work. Works like a charm. Material: ABS. (PLA og PETG will work, just had abs loaded) Layer height: 0.2mm Top layers: 5 Bottom layers: 3 Wall loops: 6 Infill type: gyroid…
Isolator that helps absorb the impact of running. My old one broke so I made this to go inside the spring with TPU. epic a52 isolator inside spring is inside the spring. epic a52 isolator is outside the spring. Print information:…
🔥 This small upgrade changes your entire treadmill setup 🏃 Ultimate Treadmill Upgrade Kit for the Zipro Pulse – Safety Key Holder, Cable Management & Bottle Holder You probably know the feeling: You step onto your treadmill… and something…
Xiaomi Walkingpad C1 Smart Folding Walkingpad Machine Treadmill foot replacement TPU
This CAD model represents a purpose-built tool designed to apply maintenance oil precisely to the center of a treadmill deck, enabling proper lubrication without belt removal or partial disassembly. A strip of firm foam must be added to…
These are all three parts you need to build the Frontpart of the T.O.D, It is an Addon to the DIY Maratron, a DIY VR-Treadmill and it allows you to move sideways via physical movement. I Printed the Box for the Maus and the upper part…
Rectreated and improved model of InsportLine Gilavar 8501c (in6938) End Cap. I made some changes to make it less fragile. Original part is not avaliable to buy so had to print my own. Use at least PETG, dont recommend PLA 3 perimeters…
Tablet/Smartphone holder for JTX fitness treadmill -JTX RunRise: Incline.
Created a larger phone/tablet holder for the treadmill since the original holder is too small for most modern cell phones and tablets.…
Picture one is the recreation and picture two is the original. I did put the top indent in originally but didn't liked how it printed so I removed it. It's not needed anyway. It fits inside the net to hold it in place and the screw holes…
Treadmill Safety Key Works for Nordictrack c800, likely others. Uses 12 8mm dia by 2mm magnets in 3 stacks of 4. Because that's the size of magnet I had laying around. Had to print narrow side down, like a mushroom to keep the magnets…
The Walkolution 2 treadmill is a marvel of engineering. I can work at a walking desk, and the loudest noise coming from the treadmill is my pants legs rubbing against each other. However, the fully manual treadmill has no way to track…
Universal tablet holder for a horizontal 32 mm tube. This holder was designed for a CARE Skyline treadmill and a Samsung Galaxy Tab A 10-inch tablet, but it can also fit other treadmills, exercise bikes and fitness equipment using a…
Turn your treadmill into a more comfortable place for reading, watching videos or following your workout. This sturdy 3D-printed holder was designed specifically for the ZIPRO Jogger treadmill. It provides a wide and stable surface for…
WHY/WHAT? Replacement treadmill safety key for the Pro-Form 505CST Treadmill. It may fit others but not tested. We have been using it for about a week, now. HOW? Print Details: Material: Any, really. I used PETG. Nozzle Profile: .4mm…
The original plastic cover on the folding release cylinder of my Sparnod STH-5100 treadmill broke, so I designed and 3D
After buying a used Brother / Acra GB4600 treadmill, I quickly realized that there was no convenient place for a phone or tablet. Instead of using generic flexible mounts, I designed a holder specifically for the shape of the treadmill…
Print settings 40% infill, 4 wall loops
The fans on the Sole F85 Treadmill are completely worthless. At it's best possible setting half the air blows behind the monitor and the rest over your head (I am 6' tall). These direct the air at my chest where I want it. To use you have…
Phone in the picture: iPhone 15 Pro. It will fit even with case. Supports both portrait and landscape orientation. Materials: TPU recommended - soft, will help prevent slipping
Hooks to hold a laptop/tablet on a treadmill. Guaranteed to fit a Sole F80 treadmill (as you can see in the photos), but should fit other models also. The hooks have "teeth" in the back designed to line-up and grab to the back grille for…
🔥 This small upgrade changes your entire treadmill setup 🏃 Ultimate Treadmill Upgrade Kit for the Zipro Pulse – Safety Key Holder, Cable Management & Bottle Holder You probably know the feeling: You step onto your treadmill… and something…
Brief instructions: Use support for the tablet holder object. Don't use support for the small parts Two files to print 1- Small parts (Print_Arranged_Small_Parts.stl / Print_Arranged_Small_Parts SHORT CLAMP) 2- Stand…
Turn the Sunny Health Manual Treadmill into a backwards-walking resistance trainer for ATG/Knees Over Toes style training without the $600 price tag. This add-on allows addition of smooth, adjustable resistance. Perfect for…
