Search results: trolli

Sort order

56 models

P
Printablesrufisium

Adjustable trolling motor support with/without Minn Kota logo

This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant

Downloads
229
Likes
21
Rating
0
P
PrintablesDeathKing

MINN KOTA Trolling Motor Propeller Blade

I build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there. I add a small center part of if too, so…

Downloads
1,951
Likes
144
Rating
5
P
Printablespennyfarmer

Fishing Planer boards for trolling

This is a great planer board that works well for trolling. I use them in a small 12' fishing boat and I can run 4 poles. I have tested these quite a bit. I strongly suggest a raft because of the knife edge that will curl from the heat.…

Downloads
430
Likes
66
Rating
4.5
P
PrintablesDanghar

Trolling fishing boat rod holder

This is my old design of trolling fishing boat rod holder. I used PETG and 30% infil.

Downloads
414
Likes
75
Rating
0
P
PrintablesRip's

Trolling Fly 3D Printing Starter Kit - Fishing Lure

This collection includes some of the basic items needed for making 3D printed trolling flies. Fly heads, one with 6mm eye recesses and two with 8mm eye recesses. Double cone bead spacers, which can be used with 6-8mm acrylic round beads,…

Downloads
323
Likes
56
Rating
0
P
PrintablesJason Dirks

Fishing Planer Boards for Trolling

These fishing planer boards are designed specifically for trolling behind a canoe, allowing anglers to spread their fishing lines out and cover a wider area of water. The planer board helps keep lines away from the canoe's wake and…

Downloads
301
Likes
33
Rating
0
P
PrintablesDT538

Garmin Kraken Trolling Motor remote pocket

Pocket for Kraken. I recommend ASA for outdoor use. Print upside down. 10/24/25 updated model to remove lip on bottom preventing remote from being inserted all the way.

Downloads
269
Likes
4
Rating
0
P
PrintablesJulius Curt

Trolling Lure

It takes squid rubber skirts. Designed based on metal ones found on Aliexpress. 3 versions with a slanted or bullet design. Prints without supports. It was somewhat tested.

Downloads
256
Likes
16
Rating
0
P
Printableswanderer_76

Trolling Motor Replacement Propeller

I've recently inherited an older Sears 24lb. trolling motor. I've looked high and low for a replacement propeller but the output shaft of this motor isn't standard. So, what better reason to experiment with 3d printed propellers. As you…

Downloads
234
Likes
29
Rating
5
P
PrintablesRip's

Fly Tying Board and Fly Heads for Trolling Fly - Fishing Lure

This is a printable board (tool) that makes tying Mylar trolling flies faster and easier. Download also includes needed fly components like heads and stems. This tying method is fast, easy, and repeatable. The board produces consistent…

Downloads
177
Likes
30
Rating
0
P
Printableslowrizzle

3D printable Salmon Trolling Fender

Salmon fenders are extremely expensive for what they are - a piece of plastic that flops around that sorta looks like a school of fish, meant to attract salmon to the bait presented in the terminal tackle a few feet beyond the dodger.…

Downloads
172
Likes
20
Rating
0
P
Printableslowrizzle

Trolling Motor Rudder

I wanted a little rudder on my trolling motor, so that when I'm off-power I can still use the motor to steer. When you're on power, the motor works well to point you in the right direction. When you're off power, you have no control. They…

Downloads
147
Likes
27
Rating
5
P
PrintablesRobert

Slant Head Trolling Lure

Add this slant/jet head trolling lure to your spread today. Combine this with your favorite 6"-8" squid squirt. Mix and match colors to make a deadly combination. Print with a minimum 3 walls for strength and durability.

Downloads
124
Likes
11
Rating
0
P
PrintablesTommy_W

Garmin Force Trolling Motor Skeg

This is not meant as a permanent replacement for the original part, I´m sure Garmin has made the original part to certain standards. But it´s nice to have as a temporary fix until a new one arrives from Garmin. I always have a few laying…

Downloads
119
Likes
13
Rating
5
P
PrintablesDan Rogers

Fishing - Trolling Fly Head blank - two styles with printable eyes! UPDATED

UPDATED - now another fly head shape with a rounder head and larger eye holes. Base head part for building your own trolling flys, sometimes called umbrella flys. Picture should make it clear. I also added a simple printable/resizable…

Downloads
116
Likes
19
Rating
0
P
PrintablesRobert

Popping Head trolling lure head

This trolling popping head lure is meant to run at the surface and pop whenever it comes out of the water making a big splash and causing a commotion. These are the perfect lure to combine with your color choice of a 6"-8" trolling skirt.…

Downloads
112
Likes
5
Rating
0
P
Printablesmashman84

trolling motor steering 25mm shaft

Remixed for use with a 25mm shaft as used on the 18t watersnake, would fit any 25mm shaft. Printed with ABS 0.6mm nozzle .6mm line width and .3mm layer height 25% gyroid infill, 3 walls.

Downloads
105
Likes
16
Rating
0
P
PrintablesZac Myers

Haswing Protruar Brushless 1.0 12v Trolling Motor Rudder for Kayak

This is a relatively basic rudder model I created to fit the Haswing Protruar Brushless 12v Trolling Motor. This motor is sold under other names as well, so if you have a chinese 12v brushless trolling motor chances are this will fit. The…

Downloads
103
Likes
21
Rating
0
P
PrintablesStarForge

28mm Victorian Gentleman Long Coat Suit Formal Attire Strolling Pose StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
91
Likes
7
Rating
0
P
PrintablesRobert

The Salty Flyer a Flying Fish copy cat trolling lure head

This is a trolling lure head meant to mimic a flying fish when pulled behind a boat. Rig it with your favorite 6" - 8" squid skirt and a 0.5 oz egg sinker and an appropriate hook. Excite the bite with THE SALTY FLYER! Pulls great,…

Downloads
71
Likes
11
Rating
0
P
PrintablesTimothy_Ecc

Minn-Kota Trolling motor speed control knob

This is the speed control knob for an older electric Minn-Kota Trolling motor.

Downloads
65
Likes
4
Rating
0

rybářská destička pro lov na trolling

Destička pro lov přívlačí za lodí (trolling)

Downloads
62
Likes
10
Rating
0
P
PrintablesYAKoholic

this is trolling motor shaft endcap for kayak

Summary this is trolling motor shaft endcap for kayak the design adopted from the youtube video in the link https://www.youtube.com/watch?v=M3DIUbQCLGw

Downloads
57
Likes
18
Rating
0
P
PrintablesChris

Vented Chugger Head Trolling Lure

This is a vented chugger head for use in trolling with ballyhoo. It can also be ran alone with a skirt and hook. Vents create a nice smoke trail and keep bubbles from ruining bait. It can be scaled for whatever size bait or fish you are…

Downloads
54
Likes
3
Rating
0
P
PrintablesStarForge

28mm Victorian Gentleman Long Coat Suit Formal Attire Strolling Pose StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
49
Likes
10
Rating
0
P
PrintablesRuebarb

Minn Kota Trolling Motor Lift System

Clamp (For Shaft Diameter 1.128") Used on Minn Kota Endura C2-55 5 Perimeters 100% Infill Use 2 - 1/4 Bolts. Hole on side for 1/4 carabiner (Snug Fit) Spacer for Harken Pulley Kit 5 Perimeters 20% Infill Harken Pulley…

Downloads
48
Likes
12
Rating
0
P
PrintablesSmidt Builds

Trolling Motor Steering Servo Mount

Trolling Motor Steering Servo Mount – Water Snake Venom I designed this servo mount to add remote-controlled steering to the Water Snake Venom trolling motor . It uses a 60kg waterproof RC servo paired with a HotRC DS650 remote . Designed…

Downloads
45
Likes
3
Rating
0
P
Printablesmatus158

Trolling motor propeller hand nut

☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus15 ❤

Downloads
38
Likes
5
Rating
0

Bedside nightstand button console for controlling smart home things

A nightstand button console for controlling lights and other devices without leaving bed. It's controlled using your garden-variety Wemos D1 Mini (clone) flashed with Tasmota for ease of configuration (I'm using these GPIO: 4, 5, 12, 13,…

Downloads
36
Likes
37
Rating
0
P
PrintablesJonathan

Dimmer Switch with Junction Box for controlling SethBon's "LED Light Bar Prusa i3 MK2/MK3"

SethBon's Light Bar for Prusa i3 Mk3/S/+ model is a fun electronics project and a really well-designed overhead printer light. The rotary dimmer switch I had on-hand is too big to fit onboard so I made this housing and junction box.…

Downloads
34
Likes
6
Rating
4
P
PrintablesILOVEMAKING
Downloads
33
Likes
1
Rating
0
P
Printablesreponinja33

aqua vu trolling fin

works with AV-715c and several other models.

Downloads
30
Likes
4
Rating
0
P
PrintablesVitoFasano

Tappo per canna da traina - Trolling rod cap

I created this simple cap for one of my trolling rods as I had lost the original one. I printed it in PETG, but perhaps it would be better to print the object in TPU.

Downloads
23
Likes
0
Rating
0
P

Tankdeckel-Kappe-Öl-kontrollieren!

Tankdeckel-Kappe-Öl-kontrollieren! Ist gedacht als eine Art "Denkzettel" um mal den Ölstand zu Prüfen denn welcher Ort ist dafür geeigneter als eine Tankstelle. Noch gibt es an Tankstellen neben Zigaretten, Brötchen, Bier, Chips,…

Downloads
22
Likes
0
Rating
0
P
PrintablesPoopDawg

Trolling Fly Beadhead

A basic beadhead for tying simple trout trolling flies.

Downloads
20
Likes
3
Rating
0
P
PrintablesVicpylon

The Trolling Keycap Set--Force Someone to Learn Touch Typing

Tired of watching someone use two fingers to type at the same speed as a dead sloth in winter? Fear not, there is a solution! Simply replace their Cherry MX keyboard letters with this set of keycaps! Every day they will see this helpful…

Downloads
20
Likes
5
Rating
0

Creepypasta Birthplace -The Trolling Well

Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…

Downloads
20
Likes
15
Rating
0
P
PrintablesDacoba

Minn-Kota Trolling motor speed control knob

If you make a modification to the speed control of your engine, this knob with the brand logo will be helpful. File designed to be printed in 2 colors

Downloads
17
Likes
0
Rating
0
P
PrintablesTeamADW

Watersnake ASP trolling motor propeller nut

Quick and easy print. .15 layer height, PETG, .4 nozzle. 4 walls will pretty much give you 100% infill for this. Using one on my propeller now, easy to keep as a spare in case you drop one on the water. You'll still need to source / make…

Downloads
15
Likes
0
Rating
0
P
PrintablesPrints Turns

Sears & Roebuck 10 Speed trolling motor transom mount

Allows for the u bolt with spring to reattach to this transom mount, so you can adjust it to be out of the water, or placed back in the water. This is my third revision and has lasted over 5 years in PETG.

Downloads
13
Likes
1
Rating
0
P
PrintablesZane a person

Servo Horn to Trolling Motor - Kayak Steering v3

This couples a 150 kg/cm servo with an electric trolling motor shaft(30mm). Print with solid walls in PETG or stronger.

Downloads
11
Likes
5
Rating
0
P
PrintablesCabbageFarts

It is a basic model of a john boat with trolling motor

This is a blueprint for a 7 foot electric trolling motor dinghy that I am soon to build. I also have used it for a printable model to visualize the concept. I built one for less than 100usd not including electric motor and battery. I will…

Downloads
11
Likes
2
Rating
0
P
PrintablesLedkos SL

Trolling exciter

Here is a concise 15-line explanation in English: A trolling exciter is a small device used in shore trolling to attract fish. It is placed on the fishing line ahead of the bait or lure. This particular exciter is 3D printed and features…

Downloads
10
Likes
0
Rating
0
P
PrintablesTibor Fazakas

Trolling motor rudder 25.5mm shaft

One side needs to be mirrored in your slicer its pretty easy to do. It's a work in progress model. Not tested on water yet. Will make changes if have to. Can be printed standing up if size is an issue.

Downloads
8
Likes
5
Rating
0
P
PrintablesAponatraza

HC Vesper Legally Distinct Handling and Controlling Interface

BEHOLD! A HAND HOLD TO BE HELD! Specifically designed for the HC Vesper's flip-up sight, but you can use it without the HUD if you want to. Uses 4x 94459A767 McMaster-Carr heat inserts and 4x M3x10mm screws. The sight piece is a little…

Downloads
8
Likes
6
Rating
0
P
Printablestom

Halterung für Steuerung eines Radiallüfters/ Mounting bracket for controlling a radial fan

Im Rahmen des „ PrintClosure-Projekts “ habe ich diesen regelbaren Radiallüfter in das Gehäuse eingebaut. Zur Montage der Steuerung dient dieses Modell. Es kann direkt mit den im Gehäuse vorhandenen Bohrungen befestigt werden. Das…

Downloads
6
Likes
0
Rating
0
P
Printablespsv6

Unusual, load-controlling barrier sensor

Using a cheap, widely used PIR Motion Module HC-SR501 sensor, you can make a barrier sensor that will control a load (one or two lamps or a fan, etc.) in a bipolar mode (when each subsequent sensor response switches the lamp to the…

Downloads
5
Likes
0
Rating
0
P
Printablesmartin_pihrt

Controlling the air supply to the fireplace insert

https://pihrt.com/elektronika/486-ovladani-privodu-vz

Downloads
5
Likes
3
Rating
0
P
PrintablesPalais79

Manual brake for golf trollies with 48,6mm frame, e.g. Jucad Titan Pro

I have a Jucad Titan Pro trolley with a frame diameter of 48,6mm. Unfortunately, all commercially available brakes for Jucad only support frame diameters up to 25mm - the 48,6mm are older models and (I was told) motor-trollies, which are…

Downloads
1
Likes
0
Rating
0
P
PrintablesWoody

3D Scan of Minn Kota Trolling Motor Lower Shell

Sorry it's not exact. We weren't spending a lot of time on it, mostly just to collect some dimensions. Uploading in case anyone else finds this model useful to take further. This does not claim to be the same part or an exact fit…

Downloads
0
Likes
0
Rating
0
P
Printables

Halterung für Steuerung eines Radiallüfters/ Mounting bracket for controlling a radial fan

Im Rahmen des „ PrintClosure-Projekts “ habe ich diesen regelbaren Radiallüfter in das Gehäuse eingebaut. Zur Montage der Steuerung dient dieses Modell. Es kann direkt mit den im Gehäuse vorhandenen Bohrungen befestigt werden. Das…

P
Printables

WaterSnake ASP Trolling Motor kayak mount improvements - no supports

I created these accessories to make using my Watersnake ASP 18lb trolling motor a bit easier on the water, and address some issues I found installing on my Pelican kayak. The motor and mount are a great value, and instead of using PVC…

P
Printables

Creepypasta Birthplace -The Trolling Well

Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…

P
Printables

Trolling Fly 3D Printing Starter Kit - Fishing Lure

This collection includes some of the basic items needed for making 3D printed trolling flies. Fly heads, one with 6mm eye recesses and two with 8mm eye recesses. Double cone bead spacers, which can be used with 6-8mm acrylic round beads,…

P
PrintablesTeamADW

WaterSnake ASP Trolling Motor kayak mount improvements - no supports

I created these accessories to make using my Watersnake ASP 18lb trolling motor a bit easier on the water, and address some issues I found installing on my Pelican kayak. The motor and mount are a great value, and instead of using PVC…

Likes
1
Rating
0
P
PrintablesTeamADW

Pelican Kayak mount plate for Watersnake ASP trolling motor

I added a Watersnake 12v trolling motor to my Pelican Ultimate 120SE kayak. The hull is somewhat thin, so I designed this mount to keep the mount from flexing in place. It is held in place by the 4 watersnake mounting bolts, and I added 2…

Likes
1
Rating
0