133 models
A cost effective way to make a round frame pool winter cover from 3D printed models, 40 mm ht pipes and a fitting tarp. The goal is to have a cover without sagging places where rain water can accumulate. Its cheaper than pool pillows and…
nothing different from the original. sorry for the consistant pics on tinkercad. i have printed this gun tho working on the new pics :)
Milwaukee M12 Subcompact Organizer Insert to be used for Drill/Driver ( 3401-20 ) and Impact Driver ( 3450-20 ), and insert in organizer for packout compact organizer (48-22-8435) Insert to snuggly hold tools, along with an optional…
Nederlandse Spoorwegen Ubcs "Bollenwagen" in gauge 1 / 1:32. ( http://spoorhistorie.com/goederenwagens-ucs.html ) The concept for bearings, wheels, buffers, couplings, etc.......... is the same as I applied to my other designs for rolling…
I replicated these hubcaps for 16 "borbet wheels mounted on a FIAT Grande Punto. I have not inserted any logo but you can safely add it chased or stick stickers, you can also use PETG or ABS but the object does not make efforts so it does…
copy of hubcap for suzuki vitara
realmente fiz para meu carro e deu certo Category: 3D Printing
I loved the transformers in grade school. This is my design of the micro series that were similar to penny racers. They were released in the late 80's. I've included the head as a single part for single extrusion as well as a dual part…
Each aero cover requires one body and 4 tabs. Each cover also requires the following hardware: 4x M3x16mm stainless pan head screws 4x M3 nuts If you want to secure it with metal hardware instead of just glue, you'll additionally need: 1…
Replacement hubcap for Qeridoo bicycle trailers. Print the part with a flexible filament with support material. Supports are only required on the outside edge of the part. The inside dome will print fine without support material. The…
Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron Truncated Cuboctahedron Truncated Icosahedron Truncated Dodecahedron Rhombicosidodecahedron Snub…
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of…
A friend lost some of these hubcaps on a bumpy ride. Luckily he had one left that I could take measurements and model it in Blender. The logo is a separate part so you can print it in a different color. I'd also suggest a bit of superglue…
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Dreadnaught configuration. The figure depicts the Artificer after activating the Giant Stature feature at level 9. Check…
poklička pro alu kola na Opel astra F tisknuto v ASA pod úhlem 45°, majitel je následně bude lakovat. seděly na první dobrou :)
A replacement hubcap for ATS rims. The logo can be printed in a second color. I tried TPU, PLA, PETG and Extrudr GreenTec Pro to print the hub cap as a sparepart. All of them were printed with 100% infill and .2mm layer hight. PETG stayed…
scale it as required, these are for a diameter of 70mm so I scaled them to 69mm just to make sure it fits at first attepmt.
Replacement hubcap for Opel Frontera. Printed in PETG with a 0.6mm nozzle and 0.44 layer height to cut down print time.
FOR TEST FITTING ONLY!!! Do NOT attempt to drive on these, and I would NOT advise attempting to even put the weight of the vehicle on these. I didn't find any of the parametric spacers/adapters on here to be quite adequate so I made my…
If your wheel has a different hole, you can download the inventor part and modify the draw in order to fix it in the wheel! To make the lettering a different color than the background enter a pause and a filament change from the slicer.
supports everywhere no sanding not my design plz like
Hubcentric ring Category: Parts
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
The original equipment does not have a front wheel hub cap. Printing from plastic with high adhesion between layers. Before installing, use a grease to protect the hub nut from rust. Category: Automotive
Empty hubcap for stickers/painting/etc. Outer diameter 77mm Hub diameter 58mm Fits Porsche original rim.
Each circumscribed radius is set to the same. ref) https://dmccooey.com/polyhedra/Archimedean.html Truncated Tetrahedron Cuboctahedron Truncated Octahedron Truncated Cube Rhombicuboctahedron Snub Cube (laevo, dextro) Icosidodecahedron…
If you like it, you can buy me a coffee ☕ for just 1$ NOT INTENTED FOR ILLEGAL ACTIVITY Basic printing settings: Support: yes Nozzle: 0.4 mm Layer height: 0.12 mm Material: PLA 1.75 mm Printing sped: 100 mm/s or less
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
This piece comes with Umbillical Back Cable .
Hubcaps for Toyota Auris 2010 and other Toyota models. Print without supports and at preferred layer height with PETG
Fiat Freemont / Dodge Journey wheel hubcap (center cover).
Designed for the Viking/Stihl iMow 632 robotic lawn mower. Fits both new and old version of the wheels, should also fit the terrain wheels. Prints in two parts for easy printing on FDM printer, the registration holes are 2.6mm, cue tips…
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Dreadnaught configuration. Check out the Giant Stature version:…
A Tux hubcap for Suzuki Swift. print back separately (PETG is preferred) print the tux front, change filament accordingly to have the 3 colors effect glue parts together
This part replaces the original Pajero 3 alloy wheel hub cap, part number MR992254. The part differs from the original by the addition of a fifth clip for increased durability. Diameter - 81mm.
Print vertically with supports for smoothest look Do not print supports in clip holes Print with ASA/ABS for best UV resistance Glue chrome rings on for best results
If YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Cubchoo, Tabletop DnD miniature 20 mm small base which can be used for DnD and other Tabletops.
A simple prop for martial-arts training, for use in practicing reaction to an attacker who is armed with a pistol. It's based on the dimensions of a Glock 43 with extended magazine. It has no sharp edges to cut or scrape you during…
Hi, is a simple Tool to Clean and Oil the Rod/Shafts 8 and 10 mm. Addtional Material: Self Adhesive Felt gliders 1,5-2 mm Print Settings: Layer Height - 0.16 Cooling Settings PLA: Cooling Settings PETG:
Simple hubcap that uses the hub retaining clip to hold the hubcap in place
These are Hubcap Wheel for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). his is an add-on for "Rear axle housing for open differential toyota third member" ( http://www.thingiverse.com/thing:1344938 ). It maintains…
supports everywhere if wanted, supports on build plate only for better detail, recommended infill: 50% to 100%
Similar to my other stand, this one is for the UBCD396XT Uniden scanner. It is narrower in two dimensions and taller to better hold the scanner in place. Simply to print, give it 3 walls for sturdiness otherwise its a pretty easy print.
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
Since I remixed and re-skinned the Valkyrie, why not add a spoiler and change the gun configuration on the landing bays? Not lying, I dig the look. Canon or not (Wiki says it is) it is a design I am very fond of. I have not test printed,…
when printing use 70-100% infill, should be fine with no supports. the fan speed should be set at 50-80% Feel free to modify and put your design on them.
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Dreadnaught configuration. The figure depicts the Artificer after activating the Giant Stature ability. Check out the…
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
Pretty simple design, I wanted a scan that would hold my scanner upright on my desk so I could see the screen. Some other holders out there are designed to hold with a leather case but this is for no case only. Holds solidly and can press…
Holder for the rectangular style hygrometer-thermometer and fits: -Ø55mm hub of cardboard spools (e.g. Overture) -Ø53mm hub of cardboard spools (e.g. California filaments) The hygrometer's snaps can be pressed in from the flat face and…
Print with something that can survive the heat of the brakes. I made mine with PETG. Needs supports.
Wheel hubcap with outer diameter of 56mm It is all one solid piece, goes in tight tap slightly with screwdriver handle, put small bead of RTV for no reason.
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Infiltrator configuration. Check out my other Armorer Artificer minis: 2024 Artificer - Armorer Kollektion von…
Base basis for Uniden ubcd3600xlt
Rear Deck Wheel for a CubCadet XT1 , did some improvement to turn better. Printed in ASA with 6 perimeters to make it stif in the middle.
Print from any UV-resistant plastic.
This is a Glock subcompact magazine Bic lighter case that also functions as a magazine keeper for keeping debris out of the magazine well while storing long term. Fits real steel or airsoft G26 and G27 models. Recommended to be printed…
"Tick, tick, tick, tick, tick." That's the sound of my Chrysler 300 while I'm rolling down the street. The sound is the result of the hubcaps bouncing around on the wheel rims. They do not fit snugly to the rim so move around in the wheel…
Skid shoe TPU95A recap for worn out skid shoes on MTD, Troy Bilt, Cubcadet Snowblower/ Snowthrower. Insert old worn out shoe into TPU95A Recap and bolt back onto machine. May have to to scale up/down .stl file based on how much the shoe…
The Prius Gen 2 usually comes with plastic aero wheel covers for the alloy wheels, but one of mine has fallen off. I made this hub cap to improve the look slightly. This should probably be printed in ASA, so that it isn't affected by UV…
These are basic Traxxas 6873r wheel hubcaps made to bolt on over your traxxas wheels in order to change colors and styles. If you'd like me to release more designs just leave a comment. Feel free to mod as necessary. I made these for my…
Replacement for the Mickey Thompson MM-245 wheel hubcaps. Unfortunately, I lost the original description of this that had a parts list when YouMagine did their recent redesign. Basically, for each hubcap, you will need: Two very good…
Centerlock style hubcap that i designed for my specific rims , That is 15x7jj TC105X ET 35. Not sure if this would fit into any other rims but if your center hole is 61mm , The hub part should fit snugly without any modification /…
This is a tool designed to tighten/loosen your 1999-2007 Chevy/GMC hubcaps, preventing the threads from stripping out.
needed a little more thread than the original model a little glitchy but good tinkercad
This is a universal 3D-printed adapter ring (hubcap) designed to adapt a Spectrum Filaments 250g cardboard spool (approx. 140mm outer diameter) for use in automated material stations. It upscales the spool to a standard 200mm diameter ,…
Best printed with ABS/ASD for strength.
I bought 15" hubcaps without any car brand markings and decided to add Toyota logo emblems (photo 1). I drew and printed the base of the logo from black PLA and silver PLA (logo) with 30% infill and ironing of the last layer - diameter…
Car holder for Uniden UBC125XLT scanner, or other similar radio. Mounted in the cup recess. Two versions of the base, with a diameter of 65 and 58mm and two versions of the arm: long and short. The arm can be adjusted at different angles.…
This model represents a 2024 Dungeons and Dragons Artificer with the Armorer subclass wearing the Arcane Armor in its Infiltrator configuration with fly speed as level 9 feature "Perfected Armor" Check out my other Armorer Artificer…
Hello, this is the hubcap of my 3D Robomow Wheel. That is a decorative design and a theft protection. In the video you can see the tire without cap. if you want to keep me awake, feel free to buy me a coffee ;-)…
Replacement hub-caps for these wheels cost $100-$150 because apparently they're made of rare plastic found only in remote corners of the world un-reachable by mortal man. On top of that they're poorly designed so tightening them to the…
Printable tool to be able to remove the hubcaps on your BMW E38 E39 with factory wheels in case you lost the special tool. Two models available, one to accommodate the factory wheel brace 17mm hex and one to accommodate the 16m Heyco tube…
Here is an RV hubcap that I designed in Onshape for a friend.
Cubcar Auxbeam 6 gang mount 42 mm clamp works for the auxbeam 6 gang control box M8 Threaded holes Might need to clean them with a tap
This is a hubcap for the steel rims for small Subaru vans. Mine started to crack so had to print new. I have had the PETG caps on for a couple of months and not a single one has fallen off. So a succesful design. Print Settings Printer…
The original orange wheel covers that came with the mower were a bit too much for the eyes. So I created a more basic and clean design. Mounting: They are just clipped onto the wheels. Put the mower on its back an unlock the 3 clips. Then…
Marginally Clever commissioned a robot arm prototype from UBC mechanical engineering students Liam Hodgson, Lucas Porto, and Oliver Wolfond for ENPH 459 in the winter of 2014/2015. Their design is modular - three repeating sections that…
Brodit adaptor plate for Uniden Bearcat UBC125XLT / Albrecht AE125H
Alerta Alerta Antifascista. I made this file with OpenSCAD and inkscape. The .gcode is for Prusa MK4S with input shaper and a 0.4 nozzle The .gcode is made for MK4S with input shaper and a 0.4mm nozzle You will need 3 kinds of PLA…
A keychain of the one and only nubcat showing the fantastic 4. Only needs 2 filament changes! Dimensions: 37*42 mm Key hole diameter; 3 mm Art made by @sillynubcat
3D Scan einer Puch Radkappe, den ich für einen Freund angefertigt habe. Für original Mercedes G/Puch G 16 Zoll Aluminiumfelgen Baureihe 460. Das Modell ist nicht perfekt, aber ein guter Ausgangspunkt für weitere Projekte und…
CZ Nemůžete sehnat pokličku pro vaše kola a už jste z toho zoufalí? Máme pro vás řešení. Nemusíte se už nikdy dívat na eBay a následně do své prázdné peněženky, či čelit podvodníkům z bazoše. Řešení máte jako na dlani. Stačí jen zmáčknout…
Scanned hubcap model for hecht lawnmower
bearing cap hub i made for the gear spinner ( https://www.thingiverse.com/thing:2135400 ) Category: Toy & Game Accessories
Just finished a little project: a custom adapter to install an universal 12V hour meter on a CubCadet mower. Now we can keep track of working hours. I used ASA filament. To install the Hour Meter I have used this products: Digital Hour…
you never knew you needed it, but hulk hubs are here! prints with no support Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ Check out my collection of warhammer…
Compatible with https://www.printables.com/model/120393-chain-links hex link
version 1.0 Needed something to fill the hole after the original hubcaps were removed from a stock GT-Line 21" wheel off a 2026 KIA EV9. Designed using Tinkercad, 51mm inner dia. The KIA Logo insert fits from behind the hubcap, use strong…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
They no longer make replacement parts for this electrode so I designed a replacement. Used an old platinum wire from a different part we had. If you want to do it cheaper make sure you use some sort of anti-corrosive wire like NiTi or AgCl.
Print seetings: PETG support needed at least 3 perimeter recommended
Milwaukee packet case for the 1/4in and 3/8in subcompact impact wrench. It also holds 1/4in metric shallow and deep sockets as well as the 3in and 6in extensions.
These are the retention clips for the Scion emblem for use on after market hubcaps. I had to Dremel out some holes in the after market hubcaps but these worked like a charm. They are two different sizes. The emblem requires one of each…
this is a replacement hubcap for a Brenderup 200 trailer, it was modeled after the original cap. printed and fitted on my own trailer with a 52mm hole.
I didn't want to put 3M tap directly on the hub since we have borrowed a Verifone, so i made a simple case that i can fasten to the table. This way the hub wont go flying everywhere
