1,034 models
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
I made this for a friend of mine who really likes the mushroom child from dark souls. As far as dice towers go, it's really basic, but it's the party of the party. The model itself will need to be resized manually in your slicer to fit…
Print approx. €66.06–€80.73 excl. taxPreliminary estimate for one variant
My Spirit XS shaft outboard works great but sometime sucks in air from the surface leading to ventilation/cavitation and power loss, especially in reverse. This plate fixes that. Should fit both the Spirit 1.0 and 1.0 plus as they have…
Print approx. €7.71–€9.42 excl. taxPreliminary estimate for one variant
Holder for PlayStation 5 Headphones
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Model of SAOs Dark Repulsor. Prints on Prusa Mini in 2 halves. I adhered mine with glue, then painted the blade and wrapped the hilt in electrical tape for a neat look.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Since our bathroom is quite small, we opted to not have the charging base out all the time. But because the foot of the toothbrush is quite small, it tends to fall. This stand is easy to print and gives the brush a good amount of…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
This ring covers the LEDs on the Tibber Pulse bridge. The light will shine through but won't illuminate the whole room anymore. Printed on MK4 with 0,20mm speed profile under 10 minutes.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
It snuggly fits to the feet of a Hercules Inpulse 500, even when you lift the deck, the feet stay on. You have to push them on at a slight angle, kind of counter-intuitive, but I promise they hold fine afterwards. Print it with any…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Vandy Vape Pulse X BF - V2 style panels cutout for 10mm x 1.5 - 2 mm magnets
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
One of our guys on the BigBricks discord came up with very nice repulsor models suitable for BigBricks Lego inspired 6 to 1 of Iron Man. The repulsor models can be found here: https://makerworld.com/en/models/504761#profileId-420434 Since…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for PETGSource material: PET
A Wall sign featuring the M41A Pulse Rifle as seen in the movie Aliens, featuring the text seen on the T-Shirt of the character ‘Frost’ stating ‘Peace Through Superior Firepower’ Colour change required at 3mm
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
This is designed to be a simple holder for the NextLevel Pulsar's 80 mm diameter paper filters.
Print approx. €5.16–€6.31 excl. taxPreliminary estimate for one variant
Replacement for the plastic cap in the pulsator/agitator. Tolerance fit, so size up if need be.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
After two weeks of modeling and testing, I'm presenting a new HyperX mouse design with a leather pattern and stitching for a more detailed look. Originally designed for MMU, but in pure white it looks just as luxurious. Enjoy, and leave a…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Couldn't find any 25 degree GoPro Hero 5 Session camera holder that I would be happy with, so I made my own. The holder uses the screws that already hold the top plate, so you just put it between the screws and the top plate. Should fit…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
A custom alien skin for the HyperX Pulsefire Saga mouse. The color printed in the photos is Matterhackers Pink-Blue Silky Magic PLA.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Holder that makes it possible to move the Tibber Pulse CT out of the outdoor electrical distribution cabinet to get a stabile connection with the Homevolt battery. I also use the same holder but with a longer foot too move the Tibber…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
Print 1:1 - PLA - module with designed interface of our other module (pin and hole) so keep the ration as indicated to fit into other modules or change ration to all of them equally. (More models on our Tinkercad, gradually we will upload…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
pulse · container modern minimalist container design with twist lock lid, with two different lid options - closed and with an inner hole (can be used for heets as an example) dimensions in mm: container ~ x: 74 · y: 74 · z: 81 lid ~ x: 74…
You'll have to excuse the part names, I didn't know the correct technical term for most of them… I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Awesome model created by PaulElderDesign https://www.thingiverse.com/thing:1693443 You find PaulElderDesign over on Etzy I liked it so much I've scaled it up to fit my printer. I have stripped back the pieces to allow for easy printing in…
Bust of Alva, Seeker of the Spurned from Dark Souls 2 - 3. Sculpted in Zbrush. Supports and photography by Charro Zuck. If you like my work, please check out my twitter / artstation. Thanks and Enjoy! Twitter :…
Recommend printing facing up with organic supports. Have tried many times to get this looking nice on FDM; no problem now with organic supports. I split the figure and base for easier printing. All credit to the amazing ‘solid’ on…
To properly secure the weak point, the model must be slightly below where the headband attaches to the frame. https://makerworld.com/en/models/2018195-playstation-pulse-elite-headset-fix#profileId-3040885 (for bambu users) Some people…
Cool 3D-printable Iron Man glove and repulsor you can wear!
Hey there! Chances are, you're the proud new owner of the Pulsefire Saga or Pulsefire Saga Pro (or maybe even both!). We wanted to provide you with the STL and STP files for your mouse's out-of-box parts as well as some bonus shapes and…
This is a remix of ClassyGoat's Dark Souls Bonfire . I also used Dekotale's remix with the separated sword. I edited the bonfire base in Tinkercad to allow for a LED votive candle to be inserted/glued through the bottom. I was going to…
"The Black Knights are the restless echoes of a dying flame, clad in charred steel that reeks of ancient fire. Faceless and voiceless, they roam the waning light— no longer men, but mere memories of a duty that never ends. Where they…
Hi thanks for printing my files! To connect the mask pieces to the main helmet I inserted some M5 nuts and used a two short screws from inside. The holes in the unions are designed to fit 1.75x15mm pings (you can make them with any…
The bonfire from the Darksouls game series. Print instructions printed at the default size it doesn't really need supports till you get to the hilt, its gets a bit wobbly up that way. I am unsure about support needed at smaller sizes.
Build Guide: https://props3d.pro/aliens-pulse-rifle/ Join me and fellow prop makers on Discord and join in some build projects: https://discord.gg/NGWhc6a3Gv Note that like most of my things they're iterative. I'm an eternal tinkerer and…
I am try to create new another water jet boat propulsion for RC models. Actual version used on by boat is "v12" It is complete open source (only for non-commercial use, another license on request) Do not hesitate to add comments about…
Here I have my model for the Amban Pulse Rifle seen in The Mandalorian. Full scale, has a length of almost 170cm. I made this as a request from a customer, there were many other models available online but I wanted to implement two steel…
For optimal results, i recommend printing the case with PETG, although PLA can also be used. After printing, simply apply double-sided tape to the printed part to ensure a secure attachment to your phone. Increase the number of bottom and…
Simple hook for Pulse 3d charger For PS5
For optimal results, i recommend printing the case with PETG, although PLA can also be used. After printing, simply apply double-sided tape to the printed part to ensure a secure attachment to your phone. Increase the number of bottom and…
Abyss Watcher Dagger - Dark Souls 3 I'd seen the model for the greatsword that goes with this ready to print, but never the dagger. So I decided to throw this up for anyone who wants to use it. I had to use the model of the Abyss Watcher…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
This is a model of the Gaping Dragon from the first Dark Souls. I really like the design of this boss so I tried to print myself a copy. The model / mesh was posed using the bone function in Autodesk 3ds Max. The part where the wings…
I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.
We made a custom wall hanger for the Sony Pulse 3D headset! It allows you to hang your headset vertically, keeping it safe and out of the way when not in use. Designed with 3d-printing in mind, our support is very sturdy and easy to…
This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and control its movement. To do this, I formed a surface from small pixels. Each flake is located…
Description The mouse cover features a honeycomb pattern for enhanced grip and comfort, with ridged buttons for better tactile feedback. Its sleek, timeless design fits a wide range of setups. Suggested Print Settings Filament: PLA…
Tibber offers an adapter for the electricity meter Easymeter Q3A for the Pulse. Unfortunately, this is currently not available. Therefore, I have designed this adapter for it. It is plugged whether on the electricity meter.
For optimal results, i recommend printing the case with PETG, although PLA can also be used. After printing, simply apply double-sided tape to the printed part to ensure a secure attachment to your phone. Increase the number of bottom and…
Modelo 3D de muñequeras y tobilleras para voluntarios de la DANA en Valencia Diseñadas para evitar que el lodo entre en el cuerpo de los voluntarios , estas muñequeras y tobilleras se imprimen en PLA con 3 perímetros para ofrecer…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
This is a model of a crystal lizard from the Dark Souls series. Have fun with it :) Print instructions Category: Video Games Print Settings Printer: CTC 3D Rafts: No Supports: Yes
All parts come oriented for optimal detail. If better stability is wanted, I recommend orienting blade5 and 6 on their largest flat faces. All parts benefit from printing with a brim for increased stability. This model is designed to be…
Sculpt of the Faraam Helm from Dark Souls, comes pre-supported for resin but totally printable on FDM, supports and photography by Charro Zuck https://bsky.app/profile/babieswithknives.bsky.social DanteZuck.com…
Original design by ImpulseRC. ImpulseRC Apex EVO original sized cam mounting brackets for customization. Print in TPU with 0-20% infill with no supports. Same size as original, so suitable for O3 cam and others.
Thanks Ryan for this model. Hope it suits your needs and please check the sizing, Cheers Jace http://www.papercraftsquare.com/berserk-life-size-skull-knight-helmet-papercraft-for-cosplay-free-template-download.html
HD Cam: GoPro HERO 11 mini Frame: ImpulseRC Apex Tilt: 25deg (Message me if you need some different tilt) Compatible with TBS ND filter Post your makes! Since camera isn't available yet some holes may be a little inacurate (I did my…
Motor / Arm guard for APEX 5 ImpulseRC, fit with everything motors who diameter doesn't exceed 30mm (My 2207.5). They are perfect for bando. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - Touching Buildplate
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
the Dark Knight Great sword from dark souls 1 now in the hands of you dummy. model was printed vertically with tree support .2 layer height.
A screen printing scoop designed based on some I have seen on the market. I wanted to print my own so I designed one. One side is round and one side is sharp. There is also a ridge on each side for easy grip. Print the middle piece at…
přední a zadní kryt(panel) pro Squonk mod VV Pulse v2 materiál: Petg,Pla,Abs atd….. výplň minimálně 20% front and back cover (panel) for Squonk mod VV Pulse v2 material: Petg, Pla, Abs etc.… .. filling at least 20%
Print in TPU file "up" and PETG file "down" The file is the same as the other one but with more space for the motor.
I wanted to print some custom doors for the Pulse AIO so I figured it'd be a great time to brush up on my Fusion360! Uses 3x1mm magnets I found on amazon. Printed on Prusa Mk3 0.2 Layer Height 15% infill
Here you have a replica of the coins from "The Binding Of Isaac 4 Souls" card game. I created this to have different types of coins in the game. I found it very annoying that there was only one type of coin, as you can get a lot of coins…
DeLorean Edition – HyperX Pulsefire Saga This exclusive edition is a remixed cover for the HyperX Pulsefire Saga mouse, based on the original model from HyperX Pulsefire Saga - Shells and Buttons - Official by HyperX | Download free STL…
UPDATE Sept 2023: Improved the size of the SX-70 version (others to follow soon) to allow for the newer Polaroid batteries. These are now .3mf models exported from fusion360, and may not be in the proper orientation. ---------- This is…
This is just a plate so you can attach your ps pulse elite to your desk or anywhere. I also made a v2 with screw hole.
Model of Tracer's weapon Pulse Pistol from the popular esports game Overwatch. I have divided the model into 4 parts for easy printing - Handle left and right, and muzzle left and right. Do print, share the makes and have fun!
My take on the BK Shield Will improve once when I have more motivation for this project. Not for commercial use Category: Props
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
I made a dark souls themed coaster with the iconic bonfire on it for a friend of mine. It was painted in bambu studio, but can also be printed with one color. i would reccomend to print it at 120% upscale and around 30% infill to have a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ FlashForge Burnt Titanium PLA+ Sunlu Silk Silver PLA+ Sunlu White Swap Instructions: Start with Black At layer #6…
Praise the Sun! Let Solaire hold a spare set of joycons, just in case you require some jolly co-operation. Full model has been split to print on a MP Select Mini - 120x120x120. I printed at 0.3mm layer heights. Could probably get the…
The Armat M41A Pulse Rifle is a pulse-action assault rifle chambered for 10×24mm Caseless ammunition. It was notably employed by the United States Colonial Marine Corps and the United States Army as their primary infantry weapon during…
Geek bar Vape case holder for lanyard so you don't loose it
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa Core One Type of bed used for prototyping: Textured Notes : All printers have…
This wall hanger is an addition to the great M41a Pulse Rifle model. https://www.printables.com/pl/model/598119-aliens-m41a-pulse-rifle I created two versions, one prepared for sticking to the wall using, double-sided tape montage glue.…
Some panel doors to fit the Vandy Vape Pulse AIO mod. These Panels use the common 3x1mm magnets and need to be glued into the panel. I have included a 'Test Fit' STL file as I print in ABS. if you print in PLA or PETG please print the…
Dark Souls 3 Black Knight Great Sword. Its about 6ft tall and I tried to make it as accurate as I can for cosplay use. . I didnt want to try and pre split this because it is MASSIVE and I honestly dont know how id go about splitting this.…
Use on the secondary personally owned gas meter only. Not for the gas company-owned meters. Elster Gas Meter (BK-G4) Pulse sensor (1 closed pulse / 0.01m³) for Home Automation with cheap Zigbee SNZB-04 Door Sensor. 31/12/2021 Added second…
Simple solution without additional material, can be printed without supports and simply plugged together. A little delicate, but if the little hooks break, a drop of superglue will help. I have selected HIGHDETAIL in the print settings.…
Panely pro Vandy Vape Pulse AIO V2. díry jsou přizbůsobeny pro magnety o průměru 3mm a výšce 2mm. V modelu jsou díry s tolerancí 0,2mm. Magnety jsou poté zalepeny lepidlem. Na některých panelech byla přidána 0,4mm vrstva obrázku a výměna…
ImpulseRC APEX EVO DJI O4 Pro camera TPU insert Use the original CNC aluminum side plates with the DJI O4 Pro camera. This replacement TPU insert replaces your existing one, enabling seamless compatibility with the DJI O4 Pro camera while…
I modified the middle section to add electronics. The ammo counter on the pulse rifle is currently a static display, powered directly to light up but without any functional programming or interaction. HDSP-K121 - dimensions 25,146 x 17,02…
Official 3D printable files for the ImpulseRC Apex frame!
Made in fusion 360. I tried to make it as accurate as I could! Let me know if there are any issues! Updated file to include a split model to lay flat on the print bed! Update: Scaling is wayyyyy offf... Scale to 190% uniform or set the…
A series of flywheel cages for the gryphon that use either hurricane/pulsar or banshee Jr flywheels. Each type comes 32.5, 33, and 33.5mm crushes and two different body types: a standard version modeled after the regular gryphon cage and…
The Paulskirche was consecrated in 1833 and in 1848 became the seat of the first German National Assembly, on whose drafts the present Basic Law of the Federal Republic of Germany is based. At present, awards ceremonies as well as…
If you build Andrew's excellent Aliens Pulse Rifle well you can't go get the queen xenomorph without some grenades to blow that egg sack off, can you? Now in the movie they are called “30mm grenades” but since the launcher in the actual…
Dark Souls bonfire ATMOS
The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…
I liked the original design because of its clean surfaces and edges. I've just tweaked it a little bit and added the base for the ApexEVO frame. !IMPORTANT!{begin} The gap between the front propellers and the mount is about 6mm. I haven't…
Default skids with added bumpers to protect the carbon somewhat. Remixed to make a couple of the screw holes larger so the button head goes all the way to the carbon, to better secure the motor. Note you will need shorter screws Print…
I modified Will Cheyney design to accommodate a better range of motion. there are 6 variants: 20° 25° 30° 20° -1mm 25° -1mm 30° -1mm The pictures show 25° with 0mm and -1mm offset. I also moved the camera 2mm down making it stick out…
Remixed this to allow a LED candle inside. I printed with lightning infil and as I was checking the strength of the opening it easily broke off easily, which I was very happy with. Using a extra bright flickering LED Candle came out…
This model is based off of its appearance Dark Souls series: Multiple variants. Sized approximately for 25mm / 28mm miniature scale. I made these models myself - they are hand sculpted from basic shapes in blender software. No custom…
First of all, to thank Jonathan67b for inspiring me with his design for a deck holder. This three holders are designed to stack on eachother and fit inside the original box. You can fit the entire game + kickstarter expansion with sleeved…
![Hercules DJ Contest: Encoders [Inpulse 200 series]](https://media.printables.com/media/prints/5dd45071-05e1-4b81-8aa7-844c735d2458/images/11216825_a46c87da-2549-455d-9d3d-93df4992d8fc_ae665a02-6464-453f-a84b-8e8dbb6220d3/photo-contest-retouche-2.jpg)
