Counting matching models…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
The ULTIMATE filament spool holder. THANK YOU FOR DOWNLOADING IT! IMPORTANT, PLEASE READ: 1. If you have problems with tolerances, please print this model by Asraff Amzani (thanks for) and carefully read the descriptions. THIS IS…
Print approx. €14.45–€17.66 excl. taxPreliminary estimate for one variant
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
This new baseplate allow mounting of several trim routers Tested with 65mm Makita Compatible with : Makita 3709 - 3710 - RT0700 - RT0701 Katsu Erbauer EPR710 Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4") Ryobi (55x55mm)…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Print approx. €7.95–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
remix of Dummy 13 by Soozafone that I made in Onshape Print at 150% - 200% size for better results and durability I frequently check this model page for new comments, so feel free to suggest things for improvement [If you want to sell it,…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
🆕 17.08.2025 A stronger clamp has been added to the Basic set. 🆕 28.02.2025 new parts ⬇ All parts can be rotated by 22.5°. Arm The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm . Each arm has a connection with a hole on one…
Print approx. €9.42–€11.52 excl. taxPreliminary estimate for one variant
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Update 19/11/23 - Added an extra large version. :D Multi-sort. A sorting tray I designed to quickly sort small parts - nuts, screws, bolts, electronic parts, lego, etc. Most sorting trays are designed to let you pick out a handful of…
Print approx. €4.64–€5.68 excl. taxPreliminary estimate for one variant
Click here to check out the new version of this body kit for the MK3 and MK4! Description: After hours and hours of watching the printer printing, you've got bored with the Design of your Prusa? Give it a new look with the Ultimate Prusa…
Print approx. €48.77–€59.61 excl. taxPreliminary estimate for one variant
This Multi-Size Hex Handle Scrapper Set is a practical and versatile tool designed for various scraping needs. Featuring three sizes—Wide, Normal, and Narrow—this set is ideal for tasks ranging from cleaning 3D printer beds to general…
Print approx. €5.51–€6.73 excl. taxPreliminary estimate for one variant
The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
*revision note 14-07-2024: increased the strength of the spring and travel of the bucket. *revision note 19-07-2024 : For better shooting performance, the spring is even stiffer, a little flange is added for releasing precision and the…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
My kids wanted mini Minecraft tools. The easy answer would be to print the fantastic models by GSAMakerspace on Thingiverse (10 years ago!), but ~~I have an XL and I wanted them in color~~ my kids demanded diamond variants. My next…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Update: 08.10.2023 I added base with holes for M3 Screws. Use it when pins in your standard Base not fit well or broke down when printed. After some days of development and prototyping I bring you my ultimate plane launcher. Easy to print…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This extremely high resolution topographic globe of the earth prints in two halves, using around 350g PLA filament. It was created using blender, and adds small step at the coastline to aid with recognition of coastlines. The complete…
Print approx. €16.27–€19.89 excl. taxPreliminary estimate for one variant
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for PETGSource material: PET
Scaled to 300%. Easy assembly. If you want, you can add glue to the eyes.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
4 handle sizes, perfect for your DIY projects
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
🎯 Secure your filament without stress! A strong, reusable clamp that prints in under 20 minutes using just 1 meter of filament. ⚠ New Version Available (V2) This model has been fully redesigned as Version 2, with improved strength, better…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
More information in this article .
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Print approx. €11.48–€14.03 excl. taxPreliminary estimate for one variant
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
We had mice show up in our house for the first time and my wife wasn't a fan of killing them. I first saw this 140+ year old mousetrap design on YouTube and then a make someone had done as a 3D print on that other site. I came up with my…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
There are already a number of hand-powered helicopters entered in the Make It Fly contest (like this , and this , and this , and this and this ), so why add another? Well, I was intrigued by these new toroidal rotors (all the cool kids…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
🚀 This is NOT a typical moon lamp 👉 You don’t just see the Moon — you feel it. 🌕 Moon Lamp – High-Relief NASA Edition (Ultra-Detailed Terrain - also visible without light ) with Mechanical Dimmer 🤯 Most 3D printed moon lamps rely on…
Print approx. €25.53–€31.20 excl. taxPreliminary estimate for PETGSource material: PET
Just an stl of the neko cat that is default in the ender 3 sd card. I just made it an stl
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I was surprised to find that this model does not come with the wall mount, same issue with the more…
Print approx. €12.52–€15.31 excl. taxPreliminary estimate for one variant
I recommend printing perpendicular to the printing plate, many more details will be preserved, there are not so many visible layers. The model can be printed without infil. Other models are in the mountain collection :…
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant
multicolour hummingbird. printed on Prusa mk2.5s mmu2s. remixed from https://www.thingiverse.com/thing:3307572 Print instructions print with up to 4 colours and support material, soluble support if you have any. black in extruder 1 green…
Print approx. €37.21–€45.48 excl. taxPreliminary estimate for one variant
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Here's another side project I did long time ago. Unfortunately it didn't go through and I haven't even collected payment for it to this day, so I share it with you... Ah, the joys of being a freelancer. I still think it turned out rather…
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Simple Rummikub tiles you can print yourself! Even without a MMU! Any friends which color vision deficiency? Take a picture of all your filament colors and let them choose 4 colors they can distinguish! Now you can all play together :D…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
Print it on the MMU2S.
Print approx. €18.59–€22.72 excl. taxPreliminary estimate for one variant
A Lite Version is now available where the bearing is not required @MrGira designed a sweet remix that you may want to check out as well INTRODUCTION This tiny spinning top is a real beast! You won't have any trouble getting it to spin for…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
I used the following Filaments -SuperFilament PLA PRO Graualuminum -SuperFilament PLA Verkehrsweiß -Sunlu PLA Blue -SuperFilament PLA PRO Türkisblau -polymaker PolyTerra PLA Army Beige -SuperFilament PLA PRO Mahagonibraun
Print approx. €17.50–€21.39 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
The model where I stacked the layers on top of each other. It is thus possible to print each layer in one color and to print the entire model more simply. Remixed from:…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Inspired by the Xbox One S controller mounting clip, this clip is designed to snuggly snap around the 8BitDo Ultimate bluetooth controller. Based on a 3D scan of my controller, it fits best by hooking the clip to the top, and then…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Varianta Kit card druhého automobilu firmy Renault z roku 1899 má nepatrně zjednodušeny tvary pro snazší skládání bez použití lepidla, tolerance otvorů jsou zvoleny pro kvalitní tiskový materiál, je proto užitečné před sestavením dílů…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Jig saw handle with container for blades Fits perfectly to Bosch blades Screw cap to avoid to loose blades The container accepts more than 8 blades Secured manipulation with screw tightening ring All parts are fully printable. The handle…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for PETGSource material: PET
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
.3mf file plus gcode for printing charizard with your MK3S+ with MMU2S This model needs to be printed with supports. Please be VERY careful and patient when removing the supports, because it can be quite tricky. Color layout for the…
Print approx. €22.12–€27.04 excl. taxPreliminary estimate for one variant
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Valentines day coming soon! If you forgot a flower buy, you have the last chance to save your problem so you don't have an angry girlfriend / Wife. The red rose is multicolored. — >The rose is 29 cm high and 3 mm thick.< ----- 1. Color is…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Plumbus separated into several pieces to allow for multi-color printing without the MMU. The parts simply fit each other without glue. The g-codes also include stand for the Plumbus, which I didn't design, but I re-scaled it for my…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
This ergonomic bottle opener is designed to easily twist off caps of various sizes. With four different diameter slots to choose from, it adapts to a wide range of bottles and small jars. Ideal for people with reduced hand strength, such…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
I used PrusaSlicer to split/merge models from https://www.thingiverse.com/thing:4635654 to make embedded text.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Tired of shoes cluttering your entryway or taking up precious floor space in your closet? Meet the ultimate 3D-printable shoe hanger : the simplest, most effective way to organize your footwear and speed up the drying process. Whether…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
An MMU version of the display cover for the Ultimate Prusa case (you can actually use the cover without the casing). New: Since many have asked for it, I made the honeycomb pattern a little wider. Ultimate Prusa casing:…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for PETGSource material: PET
Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
The ULTIMATE Guitar Pick Holder has arrived! I got the idea from seeing so many coin sorters, and I needed a way to keep all my guitar picks neatly in one place. I modeled this original piece to fit regular sized guitar picks (not bass…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
Yet another head for soozafone's fantastic LUCKY 13 model! This is just some modifications/improvements to BaGooN's also-great rabbit ears head. (Personally, I think it looks like a robot, but maybe that's just because I like robots.) I…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
![The Ultimate Finger Catapult [Easy to print] *Updated](https://media.printables.com/media/prints/941396/images/7192529_7d256018-9e3a-481a-9a42-30296430f78a_53933b0f-945f-46f8-bf3a-c4aaafb841df/afbeelding-van-whatsapp-op-2024-07-12-om-233547_1223b3e0.jpg)
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
