14,616 models
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Please read the entire text before printing! I often make the mistake of not doing so. If you like the model, consider supporting my future projects: https://boosty.to/artificialworld/donate . 1. Model: Moon Appr. diameter: 210 mm…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
Utility Carabiner: Secure and Versatile Clip for Everyday Use Product Description: The utility carabiner is a versatile and reliable accessory designed for everyday use. Featuring a pre-tensioned mechanism, it stays securely closed…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I modeled the row houses featured on the 2006 Starbucks advent calendar (last image). These models are roughly the same size as the picture on the calendar. To create the models follow the steps below: Note 1: There are included fully…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for one variant
Print Settings Material: Prusament - Gentleman's Grey Pla / Spectrum Filament - Rusty Copper Pla / EkoMb - Honey Gold Pla Nozzle: 0.4mm Support: Yes (Support on build plate only)
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Follow the official blog post: https://www.prusaprinters.org/?p=8875&preview=true You can easily turn the paper centers into a handy container for accessories, pens, jewelry or even a money box! 3D printing is easy and quick, as well as…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
Doll House Royal Couch.
Print approx. €11.58–€14.15 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I modeled the Dutch row houses featured on the Stroopwafels box. These models are the same size as the picture on the box and roughly 1∶160 scale (n scale) to a real building. To create the models follow the steps below: Note 1: the…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
⚠️ A completely new version available ⚠️ see: https://www.prusaprinters.org/prints/27181-prusament-screw-top-container-v2 Dominik made very nice containers from Prusament spool cores. However, I didn't like that the top cover is…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
This house is modeled after the last image included the photos section. It is currently modeled in HO scale but could be easily scaled for a different size. Instructions for how to print/assemble this model can be found here:…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
A drybox spool holder for printing with moisture sensitive filaments which can be used: -stand-alone -with a filament buffer -with the linear track rewind mechanism -with the universal or integrated spring hub rewind mechanisms The drybox…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Small model of a stove/oven/range, REMIXED for one-step printing
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
A non adhesive method to mount a Firehouse 2 LED strobe light to a DJI Mini 2. This mounts to the rear top by clipping on the rear vent ports in a secure fashion. Modeled against the DJI Mini 2: https://www.dji.com/mini-2 2 LED Firehouse…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
During printing my Enclosure often starts wobbling especially while printing full surfaces. So I designed this support piece to stiffen the tables legs. Instead of most existing designes I wanted to optinize the approach for 3D printing.…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Rotary disk for lots of usages, easy to print and build. Print instructions What you need? 1x 608ZZ ball bearing ( https://minm.xyz/9f0da7b8 ) Thats all. After print put bearing to bottom part with some power. Top part (small part )…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Print approx. €22.67–€27.70 excl. taxPreliminary estimate for PETGSource material: PET
This simple item solves the problem of hanging a backpack on your bicycle rack without using additional straps, panniers, or anything else. Small, lightweight, easy to print and does the job. Perfect if you are picking up your kids from…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
This diffuser is designed specifically for the 4pin WOWLed magnetic 30cm RGB light strips that you can get from amazon they come in a three pack with a three way adaptor. If you print these with a translucent white filament they diffuse…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is a temporary child safety lock that provides a more difficult locking solution, but provides the flexibility to leave open if desired. Print instructions The buckle should be printed vertically (on end) and then the other two parts…
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
I wanted a V-slot cover that could act as a diffuser for the LEDs I installed on my Ender 3 Pro. The original design fit in the v slot but wouldn't slide easily over the LEDs. Recommend PETG due to heat from LEDs. 15% infill used with…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Completely redesigned car shaped replacement parts for the HyperX Pulsefire Saga mouse. It looks like a car, but still retains the convenience of using a computer mouse. Fastening elements, ribs and mating surfaces are taken over. In some…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Easy to make a Mouse and Squirrel hybrid keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Made this because an inside joke in my family😉 If you like my work consider Buy me a coffee 😊
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below: Print the windows. If…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Coffee carousel! Dolce gusto capsule holder Another fun model for you! Enjoy your coffee and have fun! The carousel is for 1 0 Dolce Gusto capsules . Be careful! When it is not full, it is very unbalanced, I recommend constantly refilling…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Simple LED diffuser for GU10 LED lights . I have these in my kitchen and although I love the LED lights, they are not diffuse enough. IMPORTANT: Print only 2 bottom layers and 1 top layer, or it will be too thick and light will not pass…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below: Print the windows. If…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Diese Modell habe ich gemacht, da das Haus aus Holz nicht lange überlebt hat. Die Eichhörnchen hatten sehr schnell raus, dass sie nur den Deckel anheben müssen um an das Futter zu kommen. Die einzelnen Teile sind mit PETG gedruckt. Die…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This house for insects is composed of three parts, the main container (casetta.stl), a door (porta.stl), and the little rooms for the bugs (stanzine.stl). I printed this model with wooden pla and you may notice that there is a space…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for one variant
This is a standardized version of my LED diffuser I built for my enclosure using transparent PLA . It is 240mm long and has holes for M3 countersunk screws. It is for LED strips up to 10mm width. If you need another length just add a…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I found ball-transfer-units (BTUs) provide a smoother mousing experience. Inspired by bomtarnes . Details about the BTUs I used for this model: R053010810 Bosch Rexroth Ball Transfer Unit US Store:…
Print approx. €3.82–€4.66 excl. taxPreliminary estimate for PETGSource material: PET
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below: Print the windows. If…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Protractor (or goniometer) which can be used by blind users because of the tactile elements. model is also on Tactiles.eu, a database with 3D models specifically for people with vision impairment.…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
I printed it with 0.2 Layers Just 1.8 gramms and 9 min.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
I modeled one of the Dutch row houses featured on the Stroopwafels box. The model is the same size as the picture on the box and roughly 1∶160 scale to a real building. To create the model follow the steps below: Print the windows. If…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Diffusor / Streulichtscheibe für eine Lupine Pico LED Helm- / Stirnlampe. Das Licht ergibt nicht mehr einen einzelnen Spot sondern wird sehr schön gestreut. Ich habe zwei Varianten gemacht: einmal mit zwei Lagen und einmal mit drei Lagen…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I had anti-insect essential oil diffusers in damaged wooden boxes looking like Camembert ones I designed simple octagonal box and lid with Fusion 360 to replace them. Printed on my Prusa MINI+ with Prusament PLA Galaxy Black and Vanilla…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
37mm diameter diffuser for Ledlenser P7 (P7R excluded), T7 series Print settings: Filament: Translucent filaments. Layer height: 0.3mm Supports: no Perimeters: 2 Scale factors: ±100.6% for PETG was perfect fit, In my case
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Look at the picture. Very simple print.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
This Modern Retro Style Desk Clock is easy to print and looks great in any colour combination, and it's also easy to assemble. I printed all the parts as listed below and this will be reflected in the g.code. Otherwise use the STL files…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
Print approx. €7.89–€9.65 excl. taxPreliminary estimate for one variant
Modified the corner piece for Lowell Alleman 's LED diffuser . Added a small hole to let the cable exit.
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
I've created this nema 11 stepper motor mount for my ASKAR FRA 400 telescope. I give as well my dew shield for this scope. You have to found the adapter piece (coupling) 2.5mm to 4mm (stepper to focuser) as I've not designed myself.
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for PETGSource material: PET
This diffuser is upgrade for ‘Sapphire Pro - LED Strip Holder for WS2812b’ This upgrade is easy to print, I used Devil Design transparent PET-G filament, maybe it work great with white filament YOU SHOULD TRY!
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
---CZE--- Ahoj všichni Pro seskládání této bungee budete potřebovat kapku lepidla kterou naneseme na spodní stranu držáku kabelu a následně jej umístíme do připravené drážky. Na spodní straně jsou připravené kulaté díry pro umístění…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
English: Diffuser cap for the Anker Bolder LC90 flashlight. Printed in transparent Filament PM PETG. Deutsch: Streulichtkappe für die Anker Bolder LC90 Taschenlampe. In transparentem Filament PM PETG gedruckt.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Gehäuseteile zu jeweils einem Stück zusammengeführt. Gehäuse schraubbar. Andere Lüftungeslöcher. Liegende Bauform. Zusätzlich werden 6x M3x8 Zylinderschrauben DIN912 und 6x ruthex M3x5,7 Gewindeeinsätze benötigt.
Print approx. €23.72–€28.99 excl. taxPreliminary estimate for PETGSource material: PET
Pause button magnet for 5mm cube magnet. As the picture shows, the G-Code has a pause giving you a chance to slide in the magnet. I used a Neodymium supermagnet as obtained from…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Eigene Version des Framework Computer Mainboard Gehäuse
Print approx. €29.35–€35.87 excl. taxPreliminary estimate for PETGSource material: PET
RODENT MOUSE
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant
Usekh Collar
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Thank you all for the many overwhelming responses! Because I have noticed that many have additional wishes and would like to put their own spin on the design, I have decided to change the license and allow remixes. To help you get…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
Many parts of the saw are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the track names. Any settings…
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
Print with PLA, Spring with PETG, all without support, different colors. Use 2cm filament and fix it in the Bow, curve it to be parallel and use it as a pin to hold the cover on the surprise box (Suggest to oil part of the filament on the…
This is more like a slicer hack rather than a design but it works as expected. This is a flexible fabric type that has several uses. I use it to filter air intakes on fans. You can modify the air flow by changing the infill on the slicer.…
Greetings! I made this small box based on the simple Minecraft chest, a charming 3D printable model inspired by the iconic chest from Minecraft. This compact box is perfect for storing small items or serving as a functional piggy bank.…
🇺🇸 Welcome to Washington D.C.! This model was created by Alexis Hudson @ alectrodesign In addition to looking great, this is also a beautiful lamp that can be lit from inside with LED lights ! The White House is the official residence and…
Here you have Santa with sunglasses. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i optimized…
Summer is at our doorstep. At some point, I thought of making a small pocket fan. But after it was built I thought there was more potential. Not only does it keep me cool, but it also cools my camera during summer outdoor use and can also…
Updated!! 28mm Modular Medieval RPG House – FDM-Friendly Build the perfect tabletop RPG setting with this modular 28mm medieval house, designed for easy printing, gameplay, and future expansions. Whether you’re running D&D, Pathfinder,…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…
I printed with 40% infill ABS for better structural rigidity and heat resistance.
Very lightweight mouse mod for Razer Viper v2 Pro. This model was inspired by Optimum's Zeromouse.
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
4010 Mount for Ender 3 v3 se
This is a small dollhouse that I designed for my daughter so she would have a little something for the road! A bonus that was unplanned is that this fits the Mini Polly Pockets perfectly! For the magnets, I designed them to fit a 6mm x…
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
Much improved version of my original 3 story birdhouse. As the original, it can also be made as 2 story (lower and upper parts only) or single story (upper parts with lower floor). I've created separate files for window and door trims so…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Splash Yourself - Water Gun The funny water sprayer for the bathtub! Simple & Easy Print without support. Use a rubber band for the slot to seal it better. My creation for the printables bathtub contest.💦 Enjoy the parts and happy…
A series of cute woodland animals.
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
Update 6/16/25: New cosmetic improvements! Dormer now uses inserts so color can match house color. Dormer inserts slide straight up into the dormer roof and are held in place by the wall below (see photo). Made the mortise and tenons…
When I bought my first car, it didn't come with a fuse extractor, so I modeled this one from a standard Skoda fuse extractor. Printed with 0.3mm nozzle and 0.15mm layer height, but you can go even lower if you wish. The print may not be…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
This traps a mouse inside and locks them in. Assembly It's pretty straight forward. First, put the lever platform inside of the main box. The thick end should be towards the opening. You will have to bend the side walls of the box…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…
A number 7 that is 180mm tall designed to stick to the outside wall of your house or letterbox. Note that the rear surface is flat and the part is designed to be glued to the wall. Print with PETG and add the optional colour change if you…
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
