5,395 models
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Print approx. €10.61–€12.96 excl. taxPreliminary estimate for one variant
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
All information can be found here: (Parts, details, etc.) Free Plans 3-D Printed P51D RC Airplane!!! DIY! Make sure to subscribe!!!!! READ! There is a 3mf file at the top, that is saved as a project, so it has stl's inside of it that you…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET
This is an adjustable print-in-place spool for filament samples. No assembly needed, just remove from build plate, snap off the built-in supports and you're good to go. How to use: Adjust the arms inwards until you can fit the sample roll…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
An adjustable Laptop Stand, the cog part clicks into the base at the angle you want the base of your laptop to be. I designed this for a work mate who performs online training seminars so wanted to have their laptop camera at a high…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for PETGSource material: PET
I had many issues/errors/problems with my mk3s+ mmu2s while printing multi color. I can tighten idler screew to not have stopped filament, but than I had issues to work IR sensor right. I loose scree, IR sesor was working right, but…
The model is based on the Ford Mustang GT model 1967. It's not identical to the original car, but did my best to get it as close as possible. The file is scaled to match 32mm RPG miniatures (as seen in pictures). The body and wheels have…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
This is largely inspired by https://www.thingiverse.com/thing:5028257 by kageii Features This is a stand that achieves a steeper angle then the original feet, while allowing the thumb cluster to stay at any angle. It can also fold…
Print approx. €5.53–€6.76 excl. taxPreliminary estimate for one variant
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…
An easy to print-in-place phone holder/stand with 3 possible angles for the phone. Please note that the STL includes first-layer ‘tabs’ between separate small parts that need to be broken/cut post-print.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally. For very large phones, the movable holder can also be mounted upside down, so that even…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Made my own adjustable filament roller. Uses bearings for rollerblades 8 x 22 x 7 mm.
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Printing instructions: PETG Layers: 0.2mm Infill: 40% Perimeters: 6 For protection and better grip, you should attach self-adhesive felt to the back of monitor_connection_part_1 .
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
This is a model Ford Mustang GT year 2010,create by blender.
Print approx. €4.49–€5.48 excl. taxPreliminary estimate for one variant
I needed to replace an old shower-head stand. I could buy one, but what's the fun in that? :-) Printed with PLA at 0.2mm. No need for glue or supports. Update 1: The screw cover was missing from the files. I've re-uploaded them. Update 2:…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) Raw power. American legend. The Shelby GT500 on your wall. This 3D printable wall-mounted model of the Ford Mustang Shelby GT500 captures the essence of muscle car performance – long hood,…
Print approx. €11.17–€13.66 excl. taxPreliminary estimate for one variant
After creating my first glasses stand , I tried now a low poly version with improved, more realistic, form factor. Inspired by a stand which I saw weeks ago created in wood. Printing I printed it using supports by setting…
Print approx. €5.99–€7.32 excl. taxPreliminary estimate for PETGSource material: PET
I was building an enclosure for my MK3s+ with the Ikea Platsa cabinet and glass doors. Unfortunately, the only 60x60 cm glass door I found was the Enköping one (two 60x30cm doors), and there are no hinges that fit Platsa and Enköping…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This adjustable Spoolholder allows you to use every common spool on the market. You can adjust the width of the spool, by sliding the brackets on the Rail. The bearings assure a smooth filament inwind from the role. What you need for 1…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Eine stabile und einstellbare Stütze für Pflanzen, die ich nutze, wenn meine frisch geplanzten Küchenkräuter noch Halt benötigen. Um die Klammer für die Pflanze zu bewegen, hinten gegendrücken und die Stütze bewegen. Oder es auf eine…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
This case allows you to (manually) adjust the focus of a Trust Trino HD webcam (available for ~€10 on Amazon ) and mount it on a flat surface, rotatable in one or two axes (tilt or pan and tilt). With this case, the webcam becomes quite…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
Print approx. €6.13–€7.50 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: Yes, for holes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Raft: Optional Brim: Optional The fastener…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
I designed a good looking well fitting lens cap for the fairly common industar 50-2 m42 lens. If your printer is well calibrated it should be a perfect press fit. It took about 24 Minutes to print on my Ender 3.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
My take on the 3D printing evergreen – filament spool holder. The base is formed by a bunch of dovetails, allowing it to be adjusted to any width and still hold together. All the dovetails are identical, so you can assemble it as shown in…
https://www.printables.com/de/model/473483-bikemate-adjustable-bike-light-mount-with-bikemate I would be very happy about a Make, Like or Share! Happy printing!
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
ajustable phonestand with a strong fit. easy print, simple design :)
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…
Print approx. €9.14–€11.17 excl. taxPreliminary estimate for PETGSource material: PET
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant
Adjustable spool holder. Stepless / continuous width adjustment from ca. 30mm to 90mm. Assembly according fotos. Stationary parts are fit but glue ir recomended. Additional assembly parts: 1pcs. Screw M4x12 2pcs. Screw M4x16 with…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
Adjustable door lifter for installing and lubricating hinges on doors.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
This versatile and adjustable handle can be attached to almost any workshop tool, to add extra grip or improve dexterity. Simply place the loop around the object of your choice, and turn the screw to tighten the loop around the object.…
Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Jedna z nejlegendárnějších filmových honiček je dle filmových kritiků ta z filmu Bullitův případ. V této honičce naháněl Steve McQueen ve svém olivově zeleném Mustangu padouchy jedoucí v Dodge Chargeru. Kdybyste si k tomuto filmu chtěli…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Hinge for ikea carousel.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
BARBER SHOP KEYCHAIN
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
The key holder, if you hate rattling keys this is ideal solution for you. You only need print the “full print model”. For assembly: (seven keys + one keyring) Bolt M3 16mm 3x + Nut M3 3x
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 An American icon… in your pocket. This 3D printable keychain inspired by the Mustang Shelby GT500 features a sleek, flat side profile of the legendary muscle car. Minimalistic yet instantly…
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix on a bobbin storage box. I initially printed that box, but my wife immediately snapped of the latch. So, I remixed it to use a magnetic latch instead. The hinge pin is just filament. Just press a length of filament through…
Print approx. €5.63–€6.89 excl. taxPreliminary estimate for PETGSource material: PET
I needed a set of spool holders for a tight space, even less than is available on Ikea Lack table. I also wanted a spool holder that's easy to operate, screwable to the desk and won't waste even a mm of space. So how it works? You can…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
Om groenten of planten aan de stok vans te houden dat ze niet wegzakken. De gaatjes maken dat je ze kan aanbinden groot of klein. Ik gebruik ze voor mijn tomaten planten. To hold vegetables or plants to the stake so they don't sink. The…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
An adjustable PINDA mount for the Revo Prusa Mini to enable non-planar printing on your Revo Prusa Mini. Additional non-printed parts: x2 M3 square nuts x1 M3 x 8mm screw x1 M3 x 30mm screw
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
The Hammerholder is part of the KMS pinboard system. You wonder what makes him so special ? It can be easily adjusted to your hammer. Whether large or small, it adapts itself optimally to your needs. 500g or 300g no Problem for the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Fits both Vallstena and Utrusta drawer fronts for a 3/16" hole.
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
This articulating adjustable leveling foot is specifically designed for 3030 extrusions, providing a perfect solution for your construction or assembly requirements. This adjustable foot features a fine adjustment capability, ensuring…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Many divers experience difficulties to equalize and suffer from a constricted eustachian tube or clogged. Reeducation of the tube can be easily done with the combinaison of a party balloon mounted on the spherical part and while following…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
Update 25.02.2025: Fuss TPU zugefügt, um den Tisch etwas rutschfester zu machen. Das Teil ist optional und wird eingesteckt. Fuss TPU added to the base to make the table a little more non-slip. The part is optional and is plugged in. Wir…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for PETGSource material: PET
Upside Down American Yellow Mustard holder Woeber's Genuine American Yellow Mustard Squeeze Bottle PETG Only Thank you
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
I have probably put too much weight on mine Ikea UTRUSTA Corner base cabinet carousel unit, but it keeps unscrewing and pulled the screw out from the cabinet making it worse. As a workaround I have created this adapter that should keep it…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
I have made an adjustable foot for the front mount of my Dell Beamer M210X. The mount is a perfect fit and can be adjust Printed with PETG, also works with PLA Support necessary Infill at 100%
Cut one side in order to fit 2 of these next to eachother when placing Ikea Lack tables side-by-side.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
Yeep Beard and mustache
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
2D wall art of Ford Mustang Fastback 10
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Just a simple Mustache Coat Hanger
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Hello, and welcome! My name is Sebastian, and I'm a Freshman at Suncoast Community Highschool in Florida. xMOD's mission is to offer an essentially upgradable house, where you can start with the barebones and work your way up. All the…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
I made a ACME replacement nut for a Hästens adjustable bed. It should also fits a Maxwell Kbed. Print the model solid otherwise it might not be strong enough.
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
A simple mount to be able to magnet mount the self-adhesive hooks from Rusta. You pick howmany magnets you use, up to 9! I used 5 and stuck the hook on it. works like a charm. magnet diameter is 10,1mm and 2,1mm deep.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Model sluneční soustavy ukazuje žákům poměry velikostí a vzdáleností planet.
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
