Counting matching models…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…
The rod that goes into the extruder idler gear on the extruder arm likes to come loose. this will fix that. i have to push my pin back in after long prints or i end up with extreme under extrusion. this keeps the pin from getting to that…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…
I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…
####The orca profile here is fine but the klipper config is not only old but has issues in it. I would love to post an updated klipper config that works on .13 klipper but I have moved to mainline, incorporated eddy-ng, and some other…
Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…
I have added the Extruder Main body and the Blade holder for KB4-F_5 Blade We highly recommend this Blade since is more reliable/ durable/ thick and it sharp! be careful! We have switched to a better Blade…
I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…
I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…
This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…
This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…
See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…
Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…
One of the mods we are most proud of! this feet they are not just aesthetics they have multiple purpose obviously a fabulous look risers for better ventilation of the electronic part they have the role of protecting the large pulleys from…
I am sending a pre-configured sovol sv08 profiles file materials such as PLA, PLA-SILK, ABS, ASA, PETG you can mosify and experience improvements have fun profiles are in a zip file I added pla wood in the test version, set the speed as…
This is a slim version for having cable chain on the Sovol SV08 All the part are pre oriented in the best position. Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
Print with 3 perimeters, 20% infill, use snug supports to the bolt holes. Use M4 bolts and nuts to attach everything together. This works perfectly with the SV08 Filament runout sensor holder from dmika7200 . EDIT: I completely…
Fixes axel driven pin drift in SV08 extruder. -Single part print, no supports needed! -Skeletonized for strength Simply remove tool head PCB board, place this printed part behind it and bolt PCB back. It's that simple. Check out my Bambu…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
Adjusts angle of the built-in camera so it points down more (centered a bit below the nozzle). I recommend using Arachne wall generator to handle the very thin loop. Category: 3D Printer Parts
I printed this in ABS with 4 walls and 40% gyroid infill Required: 4 x M3 x H4 Heat Inserts, 4 x M3 x 20 Bolts
This is a filament sensor holder I've made for use with bottom mounted spool holders for Sovol SV-08 3D printer (such as https://www.printables.com/model/901288-sovol-sv08-side-mount-spool-holder-v2 or…
Adapter for Hotend Bambulab. Print in ABS, ASA, ASA-CF, PC-CF, not in PLA or PETG. 3 possible choices. -The original Bambulal version with fixed nozzle. You must print the BBL-O version. -The AliExpress clone, with the tiny nozzles…
Sovol SV08 first layer test 350x350mm using the complete print bed and a single 0.2mm layer. With that you can really see if your 1st layer is OK. =) IMPORTANT NOTE: You will need to remove the silicon brush (blue arrow) in the upper…
This is a direct replacement for the stock front cover of the Sovol Zero and Sovol SV08 Max toolheads. Besides improving part cooling performance, it also adds support for a dedicated toolboard fan (2510 size). We tested the part cooling…
Description When I printed my first large model on the SV08, my Nozzle clogged multiple times. I may be wrong, but my assumption here is that it's not a great idea to enclose the hotend heatsink in a plastic shell, thus killing any kind…
here you can find the last version https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led After making some tests we are glad to share with you the V2 Shroud The version 2 is using 2 more magnets to…
Tired of plastic debris getting into your Z motor pulleys? Oh, didn't know that was a problem? Small bits of plastic from printing will make its way into your Z motor pulleys and fill up the teeth. This will cause stretching of the belt…
Install this simple little widget to stop your extruder's idler pin/shaft falling out while printing & causing serious extrusion issues as seen in the images below on SV08 OG, SV08 MAX & SV ZERO printers! I know there's a few out there…
…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…
v13.1 is only available in .step. Fusion 360 keeps breaking my stl / 3mf outputs for this version, so STEPs for all. If you need an STL or 3mf I can add one, just be aware it would need to be repaired with your slicer before printing.…
Designed from scratch to improve parts cooling. -No supports needed -Uses stock blower fan -Uses (8) 4MM x 2MM magnets https://a.co/d/jkjbcDB -Optional dual 25x25 fan mounts for breakout board https://a.co/d/fANaU6A Upgrade your print…
Check out my other models :) Update 10 : Add a Honeycomb Top with 50mm Raiser Update 9 : Add 2 Tops for neo2478. Must be glued together. a normal one and a lite version for less filament needed. UPDATE 8 : Add a Honeycomb decor doorframe…
Save filament, time, and frustration with this smaller model! Big thanks to 3DPrintDemon for the original! I was having trouble printing the original on my SV08 because of how badly warped my bed was, and I didn't have another printer…
Hula Sovol SV08 Feed Adapter for Hula Credits to the original project of ThrutheFrame who made the Hula Project. This models fits to the Hula for Voron. Please read that manual for more informations. Slicer Settings • Wall loops/perimeter…
Test your bed-mesh and z offset. Use your preferred slicer and settings. Voxelpla fire orange filament
This model allows you to move the filament reel and the filament sensor lower down the side of the printer. It reduces the issue with the reel uncontrollably unspooling the filament, and reduces the overall height and width of the…
This model is an alternative to all the Top Hats out there, it is a direct copy-paste from the bottom “milk crate” part of the machine, all the alignments and measures match the existing ones in the SV08. There are 2 versions: “Long” -…
⚠ Note: These parts are printed in ABS with tight fits . ABS shrinkage and warping can affect tolerances, so proper filament tuning is essential. We strongly recommend watching our filament tuning video before printing. Before you start…
Perfect for SV08, Voron, and Voron-style gantry users looking to upgrade to a lighter, more efficient, MMU-ready toolhead. The V5 Toolhead is the next evolution after the popular V4 version , developed in response to community feedback…
Tested and useable display case to be able to use the Bigtreetech HDMI5 Display in version 1.2 (Backside connectors) with the Sovol SV08 printer. ## Print settings * 4x Walls * 5x TopLayers/Bottomlayers * 20-40 Infill * Tree support
This is a Shorter under the drag chain connector for the SV08. Use supports. This uses the exact same 10x15mm Drag Chain that is provided by solvol. I get no kick back for this. https://a.co/d/bmJhGwp
- Update 01/10/2024 : Updated cowl To make printing easier and accomodate shrinkage, I've added three motor plate models : 100 %, 101% and 102% . You have to print it at 100 % in your slicer as the models have already been enlarged. -…
Sovol SV08 Z-belt cover, so nothing can fall into the pully. You need to press it to the linear rail. It will snap in. Then glue it to the base with a small dot of super glue.
This model uses only the existing holes in the frame of the SV08, it also uses Sovol's magnetic fixing system and handles. Although the magnetic fixing system has ben redesigned for a sotfter close, using only magnets, bolts and printed…
We made this front plate to look the same as the factory “skirt” Milk Crate :D If you chose to mount the display on top, we will release 3 more options, you can hide the factory hole for the mounting positions with this mod. keep on eye…
I am using translation software. Please contact me if anything is unclear. Model discription drag_chain_180 Use 25 in my environment. Adjust if too much or too little. drag_chain_clip Use 25. drag-chain-joint-2way-main Use 1. Use two…
just my take, check out the original post for instructions. Sovol SV08 Minimal Toolhead Cover by Zappes
ok i have fixed the old versions flaws and now this works great. make sure to have the fans blow away from the board. the MCU fan now blows out the original hole. you can make these changes in your printer.cfg to have the fans use PID.…
📢 Note about this Gantry We’re not deleting this version — it will remain available for those who already use it and may need to reprint or replace parts. 👉 A new gantry repo is now live with major improvements: New CoreXY belt tensioning…
Help guide your PTFE tube out of the top of your auto feeder buffer to ensure reliable operation & stop it getting pulled over too far & jamming! BOM: No hardware needed PRINTING: Print PETG/ASA/ABS 0.2-0.3 layer height, 4 walls. Lay…
Copied the design from the official pannels, used Nadir's measures as a base. There is a version with larger holes, to add TPU washers to the bolts. BOM 1 unit of each pannel 39 M3x8 bolts 39 washers, if you opt for this version…
This clamp prevents the housing from falling off during printing; the four small magnets are not strong enough to prevent that from happening. Printed Parts: ExtruderClamp.stl (1x) or ExtruderClamp_enclosure.stl (1x) The shortened version…
SV08 Antivibration Feet "Bambu Style" Hardware: Reuse original bolts to fasten feet. Printing instructions: Print Antivibration Feet in TPU. No Supports Needed. 10 to 15% infill. 3 walls for vertical and horizontal top and bottom. The…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
The spool holder for the SV08 is... too smooth. strange problem, i know, but i was having issues with my new rolls spinning too fast and wrapping around the arm. this let you tighten the screw and add tension to the shaft. super simple,…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
This is the new lighter weight version of my original fan shroud. The weight was reduced by approximately 7g and the cooling ducts were redesigned for better results. This utilizes the stock cooling fan and a 3010 24v cooling fan. You…
Purge bucket for this monster SV08 MAX printer. It slips easily between the mount & bed frame & is held securely with x8 6x3mm magnets. You'll need slightly longer M5 front brace bolts to hold mount. Print in ASA/ABS with maybe 15-20%…
After accidentally homing while there were still printed parts on the bed the original broke. All step files are available on Github. This just adds a small extrusion to the bottom to make for a flat bottom. V2 also adds a piece on the…
Twin 24v 6015 fans (do not get any thicker unless you know you have taller printed feet) single 8015 fan version is same clearance. The twin 24v 6015 fans produce less than 45db at 5ft distance and without printer on my room was 41db. so…
Independent fan holder for SV08. detached from cover widely visible nozzle only 12g good airflow inspired from bambu shroud screws into the toolhead board works with Eddy punch through screw hole(for easy print) does not need a cover.…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: uploaded before & after graphs from my printer! EDIT: ADDED VERSIONS THAT SHOULD FIT THE STOCK FEET BOLTS! EDIT: Added 30mm & 35mm versions that use stock…
I am completely new to this environment and 3D printing, so hopefully I have uploaded and described everything correctly. If not, please feel free to contact me. I used 23 cable chains and chain clips The Base Connector uses the SV08…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. We had an request to make a version with a side exhaust for our top hat Thanks to the awesome community for the suggestions, like always we are…
SV08 3D Printer – 3D Printed Bed Frame Upgrade If you're experiencing the dreaded tacoed bed issue on your Sovol SV08 , this 3D printed bed frame is designed to solve that problem! Our custom-designed frame ensures a stable and level…
The Sovol SV08 performs well when printing materials like ABS and ASA, but these materials can emit unpleasant and potentially harmful fumes. To address this, I created a remix based on the MF Nano by MapleLeafMakers, specifically…
Regarding the HDMI screen mount position, Sovol's original design is not mounted on the LCD screen, while with the latest feedback, many customers think it should be mounted on the LCD screen's position. So, we designed the Display…
I want to add some color to my boring looking milk crate. So I took the STEP file of the base and just started learning Fusin 360 to do this. Took a couple tries but they fit nice and snug. I choose to push the triagnles in more the V's…
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
Install a REVO on your SV08! Please note: You can purchase one ready-made here if you don't have the ability to machine aluminum locally. I earn a small commission if you do:…
One Version fits the orginal feet within, use the screw for the feet to attach and just press fit the feet within the hole,, The TPU version is for gluing,, Included Fusion 360 file for modification to your own likings ,, Use Mirror in…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. BTT HDMI 5" V1.2 Integrated in the top hat we made for the Sovol SV08 It has Built In cable management and also you have 3 hole on top to dim or…
The original enclosure of SV08 is, in my opinion, a bit too expensive, or rather, it offers too little value for money. Therefore, I thought I would try my luck and design my own enclosure, which was created under the premise of minimal…
Here you can find the last version https://www.printables.com/model/938796-sv08-cn3d-shroud-v3-extra-fan-magnets-klicky-led After making some tests we found that the klicky docking needs to be adjusted. all the test have been made using…
Sovol SV08 closed top extention lit with filtration. You can use Roborock S7 Hepa filter and carbon filter at the same time. Upgrades: Fully closed Stackable Filtration Cut-outs for the fan and the filament sensor cables Every parts…
I wanted to print my top hat in Carbon Fiber PETG so i needed a solution to be able to print PETG without being afraid to lose my nozzle and damage the printer and a hard nozzle to can print Carbon Fiber reinforced PETG This is the design…
To be used with the cable chain from Sovol's official enclosure. Minimalistic design for the bottom and top chain mount. Optimized for 3d printing, no supports needed.
nothing fancy but make a huge difference. just place them under the bed in the holes and tighten as needed. be careful. the mount points are plastic and may brake. ( aka i broke one in testing :( ) if you can use TPU unscrew the 6 screws.…
Print each part separately diagonally & then when BOTH parts are printed remove your bed & line up your visible bed bolt holes in the magnet to show you where (in theory) the mounting screws are underneath! DO NOT PRINT THIS DIRECTLY ON…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. BTT HDMI 7" V1.2 Integrated in the top hat we made for the Sovol SV08 It has Built In cable management and also you have 3 hole on top to dim or…
lowers the probe to the recommend z-hight for the stock nozzle. no supports should be needed. print in asa/abs us m3 screws. offsets should be close to: z_offset: 2.5 x_offset: -18 y_offset: 16 recalibrate G28 X Y G0 X175 Y175 Z15 F6000…
So i love this model as it looked better then the other mount available for the SV08 but the original required drilling into the base and using heat inserts. I figured I would try adding the tabs from the original screen and it worked! I…
Sovol SV08 - PTFE tube connector to be screwed to the stock filament sensor. With this connector you can attach the tube of you dry box directly to the filament sensor. You will need 2 longer (M3x24) countersunk screws to attach the part…
It fit for the BTT 5" HDMI Screen V1.1 and V1.2 at the Original Screen Place. Print with 4 Walls and 20% Infill Auto supports work well.
This remixed model allows you to move the filament reel and the filament sensor lower down the side of the printer. It reduces the overall height and width of the printer. It uses the stock spool mounting parts plus one 10mm wood-screw to…
h' I remixed the model from Richard Ferrington for 120mm Fans. Maybe its needed to print Spacer Feets to allow more Airflow https://www.printables.com/de/model/867321-sovol-sv08-low-profile-vibration-isolation-feet i used the 35mm spacer…
A lighter toolhead cover. Gives ample space for cooling. You can still use Nadir klicky mount, or use my BL Touch mount. SV08 BL Touch/3D Touch Probe Mount by EternalGnome | Download free STL model | Printables.com Use 4x2mm round…
The SV08 Top Extension is a crucial component designed to enhance the functionality of 3D printers. This extension ensures that when a glass plate is placed on top of the printer, the flying gantry can reach its maximum height without…
This is a mount for the BTT Eddy (Duo) for the Sovol SV08 stock toolhead that positions the eddy coil about 2.9mm above the tip of the (stock) nozzle. This distance (or something close to it) seems to be required to enable “tap” z-offset…
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
The best adapter to convert to the Bambu X1 hot end. -Triangulated adapter that won't flex -No supports needed -Prints great in ASA -Works with stock toolhead cover (4) M3 x 16 bolts You might need to file or trim the tension block in the…
I created this to help with the Tacoing of the SV08 bed. Some of the Sovol SV08 beds center along the Y axis is lower than the left and right side on the Y axis. This causes the Taco effect. I made 320mm x 25mm x 1mm strips that when…
Introduction: Meet the MFS (Manual Filament System) – an overhaul that enhances the versatility and security of your 3D printing setup. This remix replaces the traditional two-bearings approach with rollers connecting the bearings. This…
![Atomic fan holder toolhead for SV08 Bambu style [12g] Eddy Compatible](https://media.printables.com/media/prints/1053885/images/7998873_fb6d9039-b3d2-4fb6-97d9-39a433889e15_5a0cda26-165f-4688-8f1b-36ddad0950ea/pxl_20241029_221937440.jpg)
