1,185 models
Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
I designed this to use my HOSAS VKB Gladiators on my playseat challenge. I used the following hardpoints to mount it on. https://www.printables.com/model/364829-playseat-challenge-diy-hardpoint You will need m3 35mm with nuts. (I used…
Print approx. €17.72–€21.66 excl. taxPreliminary estimate for one variant
podezdívka pod návěstidlo H0 pro zabudování do svahu
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
přesunutí vývodu do dna lapače ,zesílení spodní části, využití chytré podpory a označení zasunutí horního vývodu a hladiny vody v zásobníku dešťovky , doporučuji tisk do PETG,
Print approx. €5.95–€7.27 excl. taxPreliminary estimate for PETGSource material: PET
This is a case for an ESP32-DevKitM-1. It retains access to the pin headers. The case is designed to be printed without supports and the lid is fixed with two M3x8 screws.
I use 3DFox refills and I have a few spools left after SUNLU filament, but they are not the right size, they are a bit narrower and the diameter of the center is smaller => I made a reduction for that. 3DFox refill comes without a paper…
Featured in the Prusa Academy Fusion 360 online course.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
přidána manžeta k otření štětce
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Další budou následovat
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Zastávka Spálov - přístřešek Prefa - pro potřeby modelářů zpracováno ve velikosti TT 1:120 Edit 20251228: Přidán model v sestaveném stavu pro tisk v jednom kusu. Vyzkoušen tisk ve všech polohách - nejlépe jetisknout v základní orientaci,…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
.. ASA
Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant
Výplň 100%, na výšku, podpěry všude. Materiál PETG. Pasuje na trubku průměru 22,2 mm, upevňovací otvor průměr 6 mm.
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Házecí kostky s prvky pro procvičování zkratek prvků a jejich vlastnosti díky náhodnému hodu
Print approx. €6.47–€7.90 excl. taxPreliminary estimate for one variant
Jedna se o vlozku ktera se vklada co civky a pote se vlozi na drzak filamentu tiskarny .. jiz mnohokrat se mi stalo se motor extruderu zbytecne taha civku a telo a jelikoz neni vystredena na original drzaku motor se timto zbytecne vice…
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for one variant
Pumpičky mají různé rozměry. Délka se jednoduše zařízne a průměr když nesedí, tak se dá použít redukce a nebo upravit soubor STL. Další možnost je třeba napakování nití na závity.
jedná se o prázdnou cedulku kde si můžete v programu (např. tinkercad) dopsat vlastní text nebo dopsat např. permanentním fixem.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Plant support frame that consists of 2 or more printed "rings", 4 wooden poles (mine are 22mm thick) held together with small wood screws (3x10mm). Diameter including the wooden poles is about 15cm so your plant pot needs to be a bit…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…
I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…
ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.
I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…
Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…
1/16 RC VK-16.02 Leopard. Always check the latest version on https://github.com/edumardo/VK-16.02-Leopard you can follow the model development and construction on the following forums: Topic on RCTankWarfare forum (english). Hilo en el…
This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid
This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL One version multicolor ( printed on Průša mini), one version embossed. Filament Prusament PLA mystic brown Update 1: Added forgoten chamfer on top Update…
VKB STECS / MCG-U TDC Hat Button Cap Pack v1.1 Created by John5 CC BY-NC-SA 4.0 Special thanks to an anonymous member of the VKB Discord for help with measurements of the OEM VKB MCG-U hats. Note: Failure to follow instructions for FDM…
Construction Helmet for Lego Toilet Paper Holder Man by vvk187 - https://www.thingiverse.com/thing:1996077 Fits the NEWER version of Lego Man The Helmet is based on https://www.bricklink.com/v2/catalog/catalogitem.page?P=3833#T=C
Easy to assemble. Weathering recommended.
Vorwerk VK7 accessories wall holder single/triple Print without support
Resized for 44 pin dual USB C devkit board
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
This is my custom-made support for VKB Gladiator NXT. It uses some M6 screws and a simple clamp to fix the support to the desk. There are 2 types of alignment parts: The straight one, to ensure the support is perpendicular to the desk The…
Remix of the slimcase by scross01 for the ESP32-C6 with two USB-C ports.
Snap-in enclosure for plain ESP32 DevKitV1, I have used this for ESPresense, ESPHome AirThings BLE, ESPHome Bluetooth Proxy ..
Snap-fit case for the ESP32 devkit 30 pin with USB-C connector, specifically for this version from Amazon US but presumably would fit others. For my own prints I include my name embossed on the inside and a descriptive label in multicolor…
ESP32 Case with Snappable Lid This case is designed to hold an ESP32 board as well as a standard female barrel plug to screw-terminal adapter. There is some room for additional wiring inside as well as an opening for connectors / cables.…
Ein Luftfilterkasten für den Creality K1 zum Einspannen eines Aktivkohlefilters ( Aktivkohlefilter passend von der Dunstabzugshaube, Stärke 7mm )
Tisknu z FLEX. Dobrá zkušenost je i s tiskem z PETG.
We love the giant lego toilet roll holder created by vvk187 - https://www.thingiverse.com/thing:1996077 However, we wanted to have him festive at Christmas! Friction fit, easily remove with a little force, no glue required. STEP can be…
FREE STL of our Zivko Edge 540. More STLs here: https://dimvilleaircraft.com/product-category/stl-files/?PR
100x100 mm lithophane picture frame backlit by a Halvklart Spotlight What you need Printed parts (base, cover, button) Halvklart USB LED spolight 100x100 mm lithophane How to print your own lithophane Also, look under the section “Photos…
This is a box to hold an ESP32 DevKitC board with a grid board to solder on connectors or some electronics. The board itself is meant to rest on pin headers so that it remains removable. There is a hole for an external antenna. To use…
What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…
70A Filaflex Black Ultra-Soft, 1,75 mm By Mirdos
This is case is used to take an ESP32 DevKit-V1 which can run off battery power - i.e. no wires. So - I wanted a cheap and easy way to battery power my ESP32. But - A normal AA battery is rated to about 50mA, and only runs maximally at…
[EN] Sometimes it happens that a visitor comes with children who are bored and need to be entertained somehow. In such a case, simple and easy to print toys come in handy, where the child is entertained both by watching them print and…
This model was printed on a Prusa MINI+ printer with custom embossed text without any support. It can therefore be printed without the option of a multi-colour printer. In Prusaslicer, on the bottom side you create your own embossed text…
[EN] When opening tins and cans with a tear eye, it often happens that the eyelet fits tightly against the lid and when it is lifted, it can cause the nail to break. Thanks to this opener, even such an eyelet can be easily lifted. Two…
občas je třeba zabránit strkání předmětů do zásuvek k čemuž slouží krytka.
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…
Please use the Onhshape link if yo uwould like the pin header extrusion to be on the bottom, I prefer having a electrically isolated" bottom.…
This is a custom case that fits most general purpose OBD2 plugs and has standoffs that fit ESP32DevKit1 boards as well as the MrDIY CANBUS Shield. The case has small holes for accessing the reset/programming buttons, USB Port and LEDs on…
VK E3NG, a humble model that connect many things I wanted in my recent E3NG build. - X carriage from v1.2 - Dragon Burner compatible - Recycle Creality SPRITE extruder - CRTOUCH - Recycle of a spare VORON AFTERBURNER pcb ENJOY EXTRA INFO:…
remix of https://www.thingiverse.com/thing:2071188 2 Case options for ESP32 Devkit C (v4). One has the pins enclosed and the other with the pins exposed.
Podlahové lišty - vnější a vnitní roh, P+L koncovka. Pro klasické podlahové lišty z Bauhausu. Baseboards - outer and inner corner, P+L end cap. For classic Bauhaus baseboards. Sockelleisten - äußere und innere Ecke, P+L-Endkappe. Für…
This spring clip will mod your VKB Gladiator Omni Throttle to a "hybrid throttle" where it will hold position forward but spring return from reverse. Simply screw it into the axis lock screw hole with an axis lock screw and attach the…
This is just a plate which can be fitted to the original clamp and used with your VKB devices. Tested on NXT Gladiator with and without Omni stick. The plate has groves of 1.5mm which you can use to attach to the clamp using few cable…
VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
I've seen a great idea on reddit , but there was no stl available. So here is a quick implementation of it. You can see it in action here You can try without spring, but to be honest feels a bit odd. With spring, however, these are…
I had an esp32 devkit and 1.28 tft round display in my parts bin and thought I would load up the Bigtreetech Knomi code to see how it works and was pleased enough to make it a case to house the kit. I figured, why not share it for anyone…
REFILL cívka pro náhradní plnění PWS filamentů. Reusable REFILL spool for PWS filaments.
Simple but sturdy case for the EST-PoE-32 ESP32 PoE DevKit . It has the USB-C, Ethernet and Auxiliary power ports accessible while inside the case, plus the GPIO pins all exposed, whilst protecting the rest of the board. There is a…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas vicko na plechovku od energetaku, nebo piva aby se k hrdlu nedostaly nečistoty a spina. Do lesa, na vylet idealni.…
Jednopólová zásuvka s drátem pro automobily
A slim case for the ESP32 Devkit V4 micro-USB micro controller boards I picked up on AliExpress ESP32-WROOM-32D . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for a 0.2mm layer…
Tested PLA 0.2mm. Holes for screws 4,5mm. BIG version: Size drawer 160x189x65mm. Size depth x width x hight 165 x 247 x 72(144 Holder B)mm. For HolderB You need minimal 24,9cm print plate. Wall thinkness 5mm. SMALL version: Size drawer…
Triple holder for various things (power adapters etc) that can be plugged into standard EU socket. There is a horizontal and vertical variant. Holder is tilted and inserted things fit snugly in and dont fall off. 2 hooks are needed for…
Víčko na plechovku 0,5l od piva proti hmyzu. “Vicko pivni plechovky volnejsi.stl” je na plechovce trosku volnější a lépe se opakovaně sundává.
Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc. (in STL format)
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas Posuvné měřítka pro ruzné situace. Mate zde velikosti 100mm, 150mm, 180mm, 200mm. Staci si jen vybrat jaka z…
AC Sparta Praha víčko na plechovku od piva atd. AC Sparta Prague beer can lid etc.
Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…
Filament spool printable on Prusa Mini or other printers with smaller bed. Usable for 3DFox filament refill. Print in ABS/ASA if you are using any filament dryers! Cívka na filament tisknutelná na menších tiskárnách, např. Prusa Mini.…
I ordered some ESP32's and printed the Chonky case without measuring. It seems the boards I received with USBC were about a milimimeter longer than the boards from the original chonky case. 51.75mm long boards Of note it seems the status…
Post-apocalyptic Soviet apartment building (Khrushchyovka) inspired by abandoned Eastern European urban architecture.
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
For my LED strip project i have used a ESP32 DevKit and needed a box for it. So i designed a little box with a snap in cover. Two different designs for the cover are included. I have also added the FreeCAD files.
BOM 2x printed part "Luftfilter.stl" 1x printed part "Luftfilter_Case.stl" 4x Panhead screws 4.5mm or 5mm diameter, length depends on the fan width 1x Fan 120mmx120mmx38mm or 120mmx120mmx25mm, 12V or 24V, high pressure model highly…
I made a case for esp32 wroom devkit. It has a small window at the back for the wifi antenna (better connection). Also the pins fit into the case. 10% Infill - Grid. You could even try with less since its just a case. Print the lid upside…
Press Like for encouragement. Comment for improvement. Adaptor Virpil/Thrustmaster base to VKB NXT grip and vice versa. It hasn't been tested since I do not own a VKB. Thanks to crash1983 for the VKB interface! Note: 3D-printed plastic…
I wanted to make as small case as possible, so all headers must be removed from the ESP DevKit V1 board in order to fit it in. Optionally AM312 PIR mount can be mounted with two #6-32 screws. Enclosure can also host mmWave Radar mounted…
obrana proti hmyzu při letních měsících
Parts Needed - 6x 10x2mm Magnets (if you choose to use them) Features - Wi-Fi Antenna is not enclosed to provide best reception possible. - Snap-fit Case Lid and Magnetic Base - Room to use DuPont terminal wires - Ventilation holes for…
Update history: [5/9] Add new variant [4/20] Fix missing feature
Description Streamline your Esp32 DevKit v1 projects with this custom-designed soldering jig. Tailored for 2.54mm pin headers, it ensures precise, straight soldering every time. Ideal for both beginners and experienced makers, this jig is…
A minimal case for Rust ESP board ESP32-C3-DevKit-RUST-1 https://github.com/esp-rs/esp-rust-board It comes in 2 variants: For pins looking downwards (or no pins) and pins looking up. It's optimized to be printed with a 0.4mm nozzle. To…
Pokud máte doma po rekonstrukci příliš utopené krabice pro vypínače a zásuvky, je tento kroužek přesně to co potřebujete! Výhodou je kromě nižší ceny i to že si je vytisknete na přesnou výšku kolik potřebujete - prodávané kroužky mají…
A compact enclosure for the arduino ESP32 DEVKIT V1 (30pin) (ESP-WROOM-32).
This is an extension for the VKB Gladiator NXT. It adds 120mm in length and 70mm offset to the rear. As requested by another user over Thingiverse I also added versions where the grip is twisted 5 or 10 degrees to the left. Using the…
Jednoduchá konstrukce víčka na plechovku jako ochrana proti vosám. Oba díly se pouze zacvaknou do sebe a víčko je připravené k použití. ----- Simple construction of the lid on the can as a protection against wasps. The two parts just snap…
