Counting matching models…
Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Locking system for Original Prusa CW1 IPA tank cover prevents spillage of containing liquid in case of accidental tipping. Print instructions 3MF is prepared for all in one printing. No supports required. Tested with Prusament PETG
Leonardo AW139 Helicoper Angle Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
MB part no. A0008243699 Mercedes-Benz W124 estate (kombi) rear wiper motor shaft dust cover, with o-ring shaft seal slot. Tested for fit on an 1993 S124. Print instructions Recommended to print with premium quality filament, like…
A simple battery cover for the Fujifilm NP-W126S batteries with a small battery state window. Place the cover on the battery such that the orange circle on the battery shows through the window to indicate a charged battery. Place it the…
1992 Formula 1, Pre-Season Testing The life of a successful modern Formula One car starts with the germ of an idea, a creative spark, a flash of brilliance. It rapidly moves to exploration in a digital world where simulations are run and…
MB W 154 “The great victor of France in 1938” In 1938 Rudolf Caracciola became European Champion with the racing car developed by Mercedes Benz according to the new 3 liters formula in the same year. In 1939 Hermann Langwon the European…
EN: IBC Tote NW150 Leaf Filter Basket A custom-designed leaf filter basket for the top opening of an IBC Tote (Mauser 1000L) with an NW150 (6-inch) thread . It effectively catches leaves, moss, twigs, and other debris coming from your…
Parametrically designed holder for the temperature probe on a XH-W1219 controller. Designed to be placed within the enclosure roughly at height with the printing surface. Recommend printing in a heat tolerant plastic like PETG/ASA/ABS…
Este producto permite colocar en una posición fija el cable de carga entregado por el proveedor del reloj. No se requieren soportes durante la impresión. Utilicé filamento PLA, de fácil impresión con relleno de 10% y Cúbico Adaptativo.
Halterung, um die Panasonic Munddusche ohne zu bohren mit Silikon an einer Fliese zu befestigen.
Model do powieszenia Mercedes-AMG F1 W14 E Performance
Gehäuse für einen Digitalen Temperaturregler XH-W1308 (bezogen von Roboter-Bausatz ) für den Einbau in z.B. einem 3D Druckergehäuse zur Temperaturregelung des Gehäuselüfters. Zusätzlich zum Regler könen noch Schalter in 6mm für…
i didn't like the original butt pad “wings” so i adapted/designed my own.
For FDM - use the separated floor variant. I recommend 4% scale. This is an all-original model I designed specifically for 3D printing. I've tried to keep the assembly as simple as possible. There's an additional folder containing the…
1:42 Scale French tank from WW1. The turret rotates, as always. Two versions of the hull are included, one with and without the trench rail. I also modeled the round turret instead of the angled one because I think it looks nicer and I…
Detailed soldiers If you like this feel free to check out my other models
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were made and there are several still in serivce in the United States. This 1:32 scale version of…
1:42 Scale German tank from WW1, the only German tank produced during WW1. This design concludes the WW1 line, and all future tanks will be uploaded for sale on CGTrader. It's just one solid piece, no moving details, no assembly required.…
cup holder with coin solt Print instructions Unassociated tags: getränkehalter Category: Automotive
can be printed together or separately in other colours can be printed without support card contains mercedes keychain the mercedes is very realistic Print in place kit card , Assembly required
Welcome to my first published model! This is a wall mount for the Technic Mercedes F1 car. The majority of mounts for this car require supports and/or are printed in an orientation where the car will be pulling against the layer lines -…
Modeled using Fusion 360, the first ever tank. Took a good while to do but I'm very happy with the results. Two versions are included, one with and without a grenade roof, and each has a variant with thickened guns. Scale 1:42.
1:42 Scale French tank from WW1, this is the early production variant. I won't be making the late version. It's just one solid piece, no moving details, no assembly required. Needs supports. Goes well my Mark V Landship. This time the…
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose down. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
Just glue a threaded rod in the hole witch can help you fasten the parking pole. Grind the surface and paint it with mirror spray.
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
MERCEDES-W124-500E Silhouette
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Now I designed thinner struts, 1 mm thick. I wanted to make it 1.5 but many of the details wouldn't work or they would look bad. The…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
Upgrade the platform on your CW1 to the CW1S version. The platform will become easily removable with the option of attaching the protective FEP foil. Both the Platform star and the Ring separately fit both the MK3S+ and MINI+ bed sizes.…
AgustaWestland AW101 The AgustaWestland AW101 is a medium-lift helicopter in military and civil use. First flown in 1987, it was developed by a joint venture between Westland Helicopters in the United Kingdom and Agusta in Italy in…
MODEL FOR MANOMETER GAUGE TEMPERATURE, VOLTAGE, OIL PRESSURE, LAMBDA PROBE 52MM STANDARD FITS IN THE AIR WINDOW
[Only Planing Adapter] This dust collecter adapter works beautifully for the planing function of my dewalt DW1150 jointer/planer combo. It should also work for the very similar DW50. If its not tight enough on your shroud, you can drill…
This is a customizable 5-pin Kwikset KW1 key with label. Based off of nrp's design Open the .scad file with OpenSCAD and use the parameters on the right side to enter the coding
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose up. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
Needed a case for my temperature control switch (12V) W1209. W1209 are available in 5, 12, 24V (maybe more). In my case I used one common 12VDC source and connected the relay contacts to switch my (noisy) cooling fan on and off. Pretty…
Are you looking for a simple enclosure to hide your PCB? You've found one! Assembly is pretty straightforward, here's what you need: 1x Top cover (print) 1x Bottom cover (print) 3x Button (print) 4x M3x10 bolt (you can optionally use…
Designed to match Small size Command strips. Use 2 command strips, one on each side. The F1 logo takes some fine-tuning & creative slicing to print well, I may try to revise to print cleaner in the future. Print flat, and use supports for…
On my Mercedes 300CE W124 was rubber boot on manual shifter. There are many aftermarket leather boots for few bucks. The issue is that original frame fastening boot does not worked for me. So I created new, more sturdy. There are two…
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…
Mercedes-AMG W17 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Print the propeller 4 times and glue them on. 1 goes on the rear of each cabin, and the other 2 go on the struts hanging off the center…
can be printed together the model needs to be glued together or separately in other colours the A-10 is very realistic Print in place kit card , Assembly required need to use a support
Printable parts for your Original Prusa CW1S Curing and Washing machine. Print instructions PrusaSlicer's default PETG 0.2mm presets. For the HEATER FLANGE CW1S_ASA part, please use Prusament ASA filament as it has a better thermal…
Display stand for Lego Speed Champions model of Mercedes W12 F1 car. Printed in two parts. Allows to set a desired height and angle at which the car is rotated on the stand without falling or tipping over
It mounts under the seat
DEUTSCH: Ausklappbares Temperaturregler W1209 Gehäuse. Mit diesem Schanier kann das Gehäuse ein und ausgeklappt werden. Vielleicht können es auch noch andere Leute es gebrauchen. Dieses Thermorelais steuert das Ein- und Ausschalten Ihres…
A simple key cover for a KW1 key. The fit is tight and should stay put well. No supports needed, 0.2mm height, print in orientation shown in the pictures. I used a brim but might not be necessary. Enjoy :)
Here is a quick edit I made to use a Mosquito Hotend with the final release version of the Voron Stealtburner with CW1. I have been using another Mosquito Stealthburner mod that was based on the beta 3 version but decided to mod the final…
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
Simple case & snap-on lid for the RTL8720DN BW16 board. I couldn't find any other models available for this board, so I made one! The snap-on lid press fits snugly, and has supports to help hold the board in place. Pins are exposed on the…
Printed with supports and bottom plate. Ender 3 S-1 Pro .Minor adjustments are necessary. I used knife then sand paper and paint. Good luck
No support needed. Print the front upside down. New Version buttons (V2). They have the symbol part 1mm longer for esay pressing and the bottom 1 mm shorter so they dont stop at the switch square part.
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D…
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
All printable parts for your Original Prusa CW1 Curing and Washing Machine. Files are also available on Prusa3D Github. Print instructions PrusaSlicer's default PETG 0.2mm presets.
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…
WW1 British 18-pounder artillery gun. Scaled to fit the WW1 British soldiers in my toy collection. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D prints of this model for as long as your subscription…
Print Details: Front Arm x2 - Print on the side with supports Front Cap x2 Rear Spacer x4 Rear Top x2 Rear Bottom x2 Front Foot x2 - TPU Parts 1-5 can be printed in your favorite heat-resistant flavor of filament, I used PA6-CF with good…
WW1 British soldier throwing a grenade. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and…
WWI-inspired British Army Officer. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
Hello, This is a mounting bracket for the toyota mr2 mk1 (AW11).
A set of pins/sockets for the "Sacco boards" side trim of late W124 series Mercedes-Benz. Only the rear upper pin is missing, but they rarely break. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution:…
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
A holder that fits flatter pockets. Inspired by a model by Thingiverse user netsrac, but laid out differently, made to hold three batteries.
fits nice. made on a resin printer but should work fine on other types.
A simple 2 KW1 Key holder when using a Lishi Key Cutter to cut a key. A simple holder to ensure that 2 KW1 keys are aligned so that a blank can be cut to copy an existing key using a Lishi Key Cutter.
Awesome Fujifilm NP-W126 Battery Case with lock and simple ejection. The designer aIso incorporated a feature to use the battery orange tab as an indicator wether the batteries are charged or not. If you don't mind about this, the case…
NEW GENUINE MERCEDES BENZ W169 W203 W204 W209 W212 - BALLPOINT PEN HOLDER Since my pencil holder cracked, I drew new one, which are a little stronger in some corners, but it is very similar to the original one. Work perfectly! Printed…
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
WW1 British supply truck. I scaled this to fit the WW1 British army toys I have created. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D prints of this model for as long as your subscription remains…
Heavy Duty linear rail stop for GHH15 rails. Easy to print and compact, these use a M4 screw and m4 t-nut to secure it onto the rail. This will be a tight fit but works nicely. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No…
Distance holder for Miele's dryer or washing machine to keep the door open for a long time without the door being open or approaching further and the machine being able to dry out. Print instructions Sliced for a Prusa mini. Print without…
Change color at the proper height.
This was specifically designed for my 1999 SL-Class r129. I have been told this same design applies to w124, and w140 models which have the Sacco accent cladding, but I am unable to confirm. (Please let me know if you can confirm this!)…
WW1 British Courier on a motorbike. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and reduce…
The clutch of the Bosch MUZ5FW1 meat grinder has a predetermined breaking point to protect the food processor motor from overloading. Since I didn't want to order a new clutch every time this predetermined breaking point breaks, I…
WW1 British medical stretcher crew carrying a wounded soldier. Scale to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
Print in High Temperature filament like PETG or ABS or better ------------------------------------------------------------------------------------- Bought a broken mixer of Marketplace for dirt cheap, hoping I could fix it. Found that the…
NACA based air inlet (duct). Size can be adapted by scaling the STL-File. Inlet width: 18.5mm, length: 37.3mm. Inlet hight: 3.3mm. Works great for motor cooling of RC gliders. Retrofitting on existing fuselages possible.
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
WW1 Mark IV Tank. I scaled this to fit the WW1 British army toys I have created. $10/Month Club Tier: Grants a commercial license to manufacture and sell physical 3D prints of this model for as long as your subscription remains active.
Mercedes Benz C124 Door Panel Clip. Pictures have 3D printed and broken original in comparison. Might not be perfect. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 100% Category:…
This is a 3D model of a cheap ebay / aliexpress motor, it comes in 3V or 6V variants, with different gearbox speeds. The formfactor is ca 70mm x 22mm x 19mm with a 5.4mm diameter shaft, 9mm long. It is known as geared DC (arduino) motor…
Don't forget to give a like if the model was helpful to you. Update 12.02.2024 You can choose between two versions: the old version and the new version where I fixed some issues.
Model of panel and clips for the top center console. This remix features 5 slots for switches and a non-visible mounting method. The clips can be glued to the backside with superglue for a clean installation. I printed it on a textured…
This is a model of Mercedes seal clip for W123 Coupe model, part number A0009871015 (for reference only). Measurements taken from an original part (see photo). I've used PLA for a prototype, then ASA for the final version, but I think…
i wanna make a enclose heater for my machines easy to print and cheap to make , i found a few designs for resin printer but they do not use the w1209 temperature controller, so i did my own, i wanna try to print in temperature controlled…
untested! if you can't print it, you can buy a similar one from twosrus: http://twosrus.com/catalog/product_info.php?cPath=21_26&products_id=103 . Do provide feedback if you have issues please. I would recommend PC or a tougher nylon at…
![[IMPROVED] Dust Collection Adapter Dewalt DW1150/DW50 Jointer/Planer 100mm Hose](https://media.printables.com/media/prints/394666/images/8521118_ec898caa-ff5d-45a7-b0fa-bed8701fe997_8f4809f5-ea6e-4bfd-af04-7ca93fe0efdc/img_4853.jpeg)
