P
Printableschaw
cup holder for Mercedes Benz W124
cup holder with coin solt Print instructions Unassociated tags: getränkehalter Category: Automotive
- Downloads
- 1,161
- Likes
- 89
- Rating
- 5
Search results: w12
Counting matching models…
P
PrintablesMarksmith
Mercedes W124 Parking pole
Just glue a threaded rod in the hole witch can help you fasten the parking pole. Grind the surface and paint it with mirror spray.
- Downloads
- 732
- Likes
- 43
- Rating
- 0
P
PrintablesKai Gloystein
MERCEDES-W124-500E Silhouette
MERCEDES-W124-500E Silhouette
- Downloads
- 639
- Likes
- 70
- Rating
- 5
P
PrintablesKosut_Ondrej
Fujifilm NP-W126, NP-W126S Battery case
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
- Downloads
- 492
- Likes
- 42
- Rating
- 5
P
Printablesgest go
GAUGE AIR VENT MERCEDES W201 (190) W124 (300) 52MM
MODEL FOR MANOMETER GAUGE TEMPERATURE, VOLTAGE, OIL PRESSURE, LAMBDA PROBE 52MM STANDARD FITS IN THE AIR WINDOW
- Downloads
- 472
- Likes
- 32
- Rating
- 0
P
PrintablesTritschi
Case for W1209 Temperature Control Switch
Needed a case for my temperature control switch (12V) W1209. W1209 are available in 5, 12, 24V (maybe more). In my case I used one common 12VDC source and connected the relay contacts to switch my (noisy) cooling fan on and off. Pretty…
- Downloads
- 380
- Likes
- 20
- Rating
- 5
P
PrintablesDaniel Frank
W1209 Termistor Enclosure
Are you looking for a simple enclosure to hide your PCB? You've found one! Assembly is pretty straightforward, here's what you need: 1x Top cover (print) 1x Bottom cover (print) 3x Button (print) 4x M3x10 bolt (you can optionally use…
- Downloads
- 376
- Likes
- 29
- Rating
- 5
P
PrintablesSilver99
Mercedes W124 manual shifter boot frame
On my Mercedes 300CE W124 was rubber boot on manual shifter. There are many aftermarket leather boots for few bucks. The issue is that original frame fastening boot does not worked for me. So I created new, more sturdy. There are two…
- Downloads
- 339
- Likes
- 36
- Rating
- 5
P
PrintablesPeter Bahleda
Lego Mercedes W12 F1 car display stand
Display stand for Lego Speed Champions model of Mercedes W12 F1 car. Printed in two parts. Allows to set a desired height and angle at which the car is rotated on the stand without falling or tipping over
- Downloads
- 283
- Likes
- 50
- Rating
- 5
P
PrintablesHerzZorro
REMIX - Ausklappbares W1209 Case / Fold out W1209 case
DEUTSCH: Ausklappbares Temperaturregler W1209 Gehäuse. Mit diesem Schanier kann das Gehäuse ein und ausgeklappt werden. Vielleicht können es auch noch andere Leute es gebrauchen. Dieses Thermorelais steuert das Ein- und Ausschalten Ihres…
- Downloads
- 272
- Likes
- 21
- Rating
- 5
P
PrintablesRekcik
Mercedes W124 W126 W140 seat belt Gear Gurtbringer Zahnrad
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
- Downloads
- 243
- Likes
- 30
- Rating
- 0
P
PrintablesKazi Toad
Fujifilm NP-W126 battery holder
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…
- Downloads
- 227
- Likes
- 35
- Rating
- 5
P
Printablesptashek
Mercedes W124 Sacco Trim Mount Kit
A set of pins/sockets for the "Sacco boards" side trim of late W124 series Mercedes-Benz. Only the rear upper pin is missing, but they rarely break. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution:…
- Downloads
- 199
- Likes
- 23
- Rating
- 0
P
PrintablesLick2Trip
Mercedes Benz r129 w124 w140 Exterior Door Panel Trim Clips
This was specifically designed for my 1999 SL-Class r129. I have been told this same design applies to w124, and w140 models which have the Sacco accent cladding, but I am unable to confirm. (Please let me know if you can confirm this!)…
- Downloads
- 166
- Likes
- 18
- Rating
- 0
P
Printableskermz
Mercedes Benz C124/W124 Door Panel Clip A0019883381
Mercedes Benz C124 Door Panel Clip. Pictures have 3D printed and broken original in comparison. Might not be perfect. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 100% Category:…
- Downloads
- 159
- Likes
- 25
- Rating
- 0
P
PrintablesMarve25
Mercedes Benz W123 Center Console Switch Panel
Model of panel and clips for the top center console. This remix features 5 slots for switches and a non-visible mounting method. The clips can be glued to the backside with superglue for a clean installation. I printed it on a textured…
- Downloads
- 158
- Likes
- 20
- Rating
- 5
P
PrintablesNerdyBean
Enclosure for W1209 thermostat
Don't forget to give a like if the model was helpful to you. Update 12.02.2024 You can choose between two versions: the old version and the new version where I fixed some issues.
- Downloads
- 157
- Likes
- 12
- Rating
- 3
P
PrintablesFulior
Mercedes W123 Coupe clip for door seals
This is a model of Mercedes seal clip for W123 Coupe model, part number A0009871015 (for reference only). Measurements taken from an original part (see photo). I've used PLA for a prototype, then ASA for the final version, but I think…
- Downloads
- 156
- Likes
- 17
- Rating
- 0
P
Printablesodindj1979
3d Printer Enclosure Chamber Heater w1209
i wanna make a enclose heater for my machines easy to print and cheap to make , i found a few designs for resin printer but they do not use the w1209 temperature controller, so i did my own, i wanna try to print in temperature controlled…
- Downloads
- 154
- Likes
- 55
- Rating
- 0
P
Printablesptashek
W124 cable harness clip
Two of these cable clips are used to secure parts of the lower engine wiring harness to the engine block on a W124 series Mercedes-Benz. The same size clip is used in a number of other locations on the car. Print Settings Printer Brand:…
- Downloads
- 146
- Likes
- 27
- Rating
- 0
P
PrintablesBurgermeisterDesign
Key case for Mercedes Benz Key W123
Key case for Mercedes Benz Key W123 without pause. (If you need with a pause look at my Acc!)
- Downloads
- 145
- Likes
- 16
- Rating
- 5
P
Printablesptashek
Mercedes W124 trim cover A1247450180
This cover is located on the top edge of the tailgate door trim on Mercedes-Benz W124 estate/wagon/kombi models. The plastic gets brittle with age and the latches brake off. I've printed mine from PETG to allow the part to flex a little.…
- Downloads
- 135
- Likes
- 23
- Rating
- 0
P
Printablesandronick83
Enclosure for XH-W1209 Temperature Controller DC 12V
Housing for 12V DC XH-W1209 Temperature Controller For this case, it is necessary to solder elements from the other side of the board Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100% Notes: The dimensions of…
- Downloads
- 129
- Likes
- 10
- Rating
- 0
P
Printablesplastronics
Mercedes-Benz W126 side skirt fastening clip
This is a 1:1 copy of the original MB W126 side skirt fastener. Printed in PETG. Print settings: -0.1mm layer height -Organic supports -4 perimeters
- Downloads
- 121
- Likes
- 23
- Rating
- 0
P
Printablesmarenextdoor
Mercedes Benz W123 OM617 300D Automatic Transmission Bowden Adjustment Bolt
This is a replacement adjustment bolt for the bowden cable that sets the shift points for the automatic transmission in the mercedes benz 300T/C/D w123 models with the OM617 engine. The slot in the side is so it can be installed without…
- Downloads
- 118
- Likes
- 14
- Rating
- 0
P
PrintablesSirRenix
w124 fairing clip - verkleidungs clip
w124 fairing clip - verkleidungs clip
- Downloads
- 116
- Likes
- 14
- Rating
- 0
P
PrintablesSuperWilli
Fujifilm NP-W126s battery case rugged box
Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…
- Downloads
- 112
- Likes
- 24
- Rating
- 4.67
P
Printablesptashek
Mercedes-Benz W124 Estate: rear wiper motor shaft dust cover
MB part no. A0008243699 Mercedes-Benz W124 estate (kombi) rear wiper motor shaft dust cover, with o-ring shaft seal slot. Tested for fit on an 1993 S124. Print instructions Recommended to print with premium quality filament, like…
- Downloads
- 101
- Likes
- 16
- Rating
- 0
P
Printablesptashek
Mercedes-Benz W124 estate boot badges
Replacement boot badges for the estate / kombi version of W124 series Mercedes-Benz, optimised for 3D printing.
- Downloads
- 100
- Likes
- 26
- Rating
- 0
P
PrintablesAndrás Bognár
W1219 Thermostat Enclosure with GoPro Mount
This is a very simple yet good looking enclosure for the very cheap and popular W1219 thermostat module. You can use this module for almost everything related to heating or cooling. It is easily programmable and suitable for every DIY…
- Downloads
- 94
- Likes
- 7
- Rating
- 0
P
PrintablesColin
PrusaBox w1219 Temperature Control Housing
Redesign of the modular front for the w1219 temperature controller housing, with switch for Raspberry Pi and longer internal groove for the w1219 circuit board. Orientate with the main face, face down on the bed. No supports needed. Print…
- Downloads
- 92
- Likes
- 13
- Rating
- 5
P
PrintablesValentin
Mercedes A2017270287 - W201 W124 - Door Panel Clip - Vapor Barrier
Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…
- Downloads
- 91
- Likes
- 12
- Rating
- 0
P
PrintablesVlad Lavrenko
W124 wiring duct (OE Number A1248210089)
My duct had all of its pins/clamps/whatever missing and didn't want to pay 70 Euro for an aftermarket replacement, so I reproduced the design. I have no clue how the original part was clipping into the heat wall, so I made it the way you…
- Downloads
- 88
- Likes
- 10
- Rating
- 0
P
PrintablesArtemix
W12 Fidget engine keychain
If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 After a lot of requests , I finally made it — a W12 engine block fidget keychain ! Turn the flywheel and watch the pistons move inside…
- Downloads
- 87
- Likes
- 17
- Rating
- 0
P
PrintablesLaskaKit
LaskaKit krabička pro termostat W1209
LaskaKit krabička pro termostat W1209 Jednoduché a pěkné pouzdro na známý termostat w1209 s uchycením čtyřmi šrouby M2,2x5. Použití transparentní 1,75mm Termostat https://www.laskakit.cz/digitalni-termostat-w1209-50-az-110-c/
- Downloads
- 85
- Likes
- 14
- Rating
- 5
P
PrintablesMrLee
Fuji NP-W126 Gridfinity Battery Holder
Quickly knocked together a holder for two fujifilm NP-W126(S) batteries
- Downloads
- 84
- Likes
- 2
- Rating
- 0
P
Printablesmarenextdoor
Mercedes Benz W123 300D Center Console Switch Panel
Model of the panel and clips for the top center console panel. Print 2x clips and one panel and assemble as you like. I used pop rivets but would suggest screws and nuts instead. Front screw holes have a counter bore so you can cover the…
- Downloads
- 84
- Likes
- 18
- Rating
- 0
P
PrintablesMgr. Pavel Krist
LEGO Volkswagen W12 cabriolet
LEGO Volkswagen W12 cabriolet
- Downloads
- 82
- Likes
- 15
- Rating
- 0
P
PrintablesDelta3D
frontal para termostato W1209 Front Panel
Frontal para el modulo termostato W1209 , para que encaje hay que desoldar para dar la vuelta al rele y a los conectores como se ve en las fotos. Front Panel for W1209 Digital Thermostat Category: DIY
- Downloads
- 81
- Likes
- 4
- Rating
- 0
P
PrintablesBurgermeisterDesign
Key case for Mercedes Benz Key W123
Key case for Mercedes Benz Key W123 with pause to insert key
- Downloads
- 73
- Likes
- 10
- Rating
- 5
P
PrintablesSilver99
Mercedes W124 fuse rail
For cars that do not have fuse section for EFGH fuses this part fits in original space. Using modern blade style fuses which fit into female Faston 6,3mm (with backward securing pin) you can connect additional appliances.
- Downloads
- 67
- Likes
- 10
- Rating
- 0
P
PrintablesRaúl Caro Pastorino
W1209 Case Digital Thermostat
Protective case for the w1209 module with access to the screws and external buttons. Includes various mounts for the temperature sensor, allowing it to be mounted on surfaces.
- Downloads
- 63
- Likes
- 6
- Rating
- 0
P
Printableslahn92
Milwaukee M12 CIW12 1/2in Impact Wrench wall mount
A mount for Milwaukee M12 CIW12 1/2in Impact Wrench based around a 3d scan. uses 2 screws for mounting.
- Downloads
- 60
- Likes
- 3
- Rating
- 0
P
PrintableseLMar
Camera Battery holder for Fujifilm NP-W126S and NP-W235
Really useful battery holder to keep the batteries within reach, great for multiple scenarios! I made it in tpu to have the best fit, it also protects the connector on the lower side.
- Downloads
- 56
- Likes
- 3
- Rating
- 4
P
PrintablesOnyxHat
XH-W1219 Probe Holder
Parametrically designed holder for the temperature probe on a XH-W1219 controller. Designed to be placed within the enclosure roughly at height with the printing surface. Recommend printing in a heat tolerant plastic like PETG/ASA/ABS…
- Downloads
- 47
- Likes
- 12
- Rating
- 4.5
P
PrintablesSilver99
W124 door window regulator outer plug A1109870544
Original rubber plugs A1109870544 are usually ruptured because their surface is deep under door surface. In some cases (on my C124 front adjusting screw) the screw is protruding out so it is impossible to mount original cap without…
- Downloads
- 47
- Likes
- 6
- Rating
- 0
P
PrintablesMax629
W126 W123 W115 W116 Einpresswerkzeug Radialwellendichtring Antriebswelle Differential
Radialwellendichtring Antriebswelle Differential Einpresswerkzeug mit 100% Infill drucken dann hält das Teil auch Hammerschläge aus. Material PLA reicht…
- Downloads
- 46
- Likes
- 7
- Rating
- 5
P
Printablesptashek
W124 AC Condenser Mount Grommet
This is a direct replacement for MB part number A2019970381 "Grommet: Condenser to stiffening and to front cross member" i.e. the grommet through which the bottom of the AC condenser in a W124 chassis is locked in place. Things changed…
- Downloads
- 43
- Likes
- 7
- Rating
- 0
P
Printables_dark
LeadCNC C-Beam Limit Switch Holder (KW12-3)
Parts: 1 - KW12-3 Limit Switch ( amazon ) 2 - M3 x 4mm L x 5mm Brass Heat Inset 2 - M3 x 10mm Button Head 2 - M5 x 15mm Button Head
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
Printablescstmlinedesigns
Toolkit for W124 medbox
posted this due to popular demand and people asking, posting as a STEP file as it can be easily worked with and modified for someones specific toolkit. Enjoy people!
- Downloads
- 41
- Likes
- 8
- Rating
- 0
P
PrintablesElias
Fujifilm NP-W126S Rugged Battery & SD Card Case
Designed for two Fujifilm NP-W126S batteries and three full-size SD cards , with a hinged lid, reinforcing ribs, and a separate latch. The batteries and cards sit slightly above their compartments so you can grab them easily. What fits •…
- Downloads
- 40
- Likes
- 14
- Rating
- 5
P
PrintablesUntangleWORKS
fuji np-w126 battery cover
Fuji NP-W126 battery contacts cover. Category: Camera
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesNoob@Printing
Mercedes W201 W124 Sportline Badge
This is a sort of 1 to 1 recreation of the rare dealer add on Sportline grill badge. I sadly only had pictures to go off of since original examples are insanely expensive. I wasn't able to get the lettering perfectly as Solidworks didn't…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
Printablesmarenextdoor
Mercedes Benz W123 300C/D/T Gas Tank Vent Bell
Printed out of FilaFlex40, 100% Infill. When I was checking the vent line for the fuel tank on my W123 I noticed that mice had chewed away a good amount of the flexible bell that points downward to prevent debris from entering the vent…
- Downloads
- 37
- Likes
- 8
- Rating
- 0
P
PrintablesCrooksUSA
W1209WK Temperature Controller - Anycubic Mono X 6K Resin Printer Heater
I remixed the heater case for use in my FDM printer enclosure; I added a loop to hang it from a 12mm carbon fiber tube. I also modified it to use 4mm OD x 4mm M3 heat inserts. The back cover was modified with a built-in temperature probe…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesPavel Necas
Mercedes W124 Sacco Trim Mount Kit - Missing Upper Pin
There is a missing mount trim from Ptashek's mount kit for the W124 Sacco panels, so here is the addition. I personally print in PETG, it doesn't need supports.
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesMaFE72
MW122A Volt and Ammeter Gauge Holder Frame
This is a holder frame to install a popular “Chinese” volt and ammeter gauge with 100V/10A ratings to a Multi-Voltage Regulated DC Power Supply: MW122A. Installation You will need to drill three (3) holes on the MW122A shell, one hole of…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesRaven Van de Werken
DeWalt Powershop DW125 Saw Exhaust
This little part fits on the DeWalt Powershop DW125's sawdust exhaust on the saw part in order to redirect the flow
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesJim Nangano
Prusabox W1219 modular panel with fan control and light control.
I redesigned this W1219 panel for the Prusabox. I absolutely hate sunken letters and filling them with color makes them look even worse. Even worse, the panel buttons were in the wrong place! I fixed the button alignment and also put in…
- Downloads
- 26
- Likes
- 4
- Rating
- 4
P
Printablesriethmueller
Modular control panel - modul_front_W1219 remix
Change engraved language to German and change/add two buttons in the section light. The mounting hole are designed for the switch type R13-508B
- Downloads
- 25
- Likes
- 6
- Rating
- 0
P
PrintablesPavel Necas
Mercedes Benz W124 - Sacco Trim Sun Visor Holder Bracket
Hello everyone, Here is a Sacco trim sun visor holder bracket. I recommend printing in ASA, or PETG - definitely not PLA (cabin heat!). This is a very functional part, because it has to withstand forces from multiple rotation's of the sun…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesKyle Falconer
Prusabox W1219 modular panel with fan control and light control - remix for cleaner printing
A remix of the redesigned W1219 Modular panel for the Prusabox for light and fan control
- Downloads
- 24
- Likes
- 5
- Rating
- 5
P
PrintablesManuel Vogt
Mercedes Benz W124 Key with central locking
Hey guys, i made a key for my Mercedes Benz W124 with central locking sender it fits for this inca pro rf locking system http://www.ebay.de/itm/201196319152?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT i used the screws from…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
Printablesptashek
W124 SLS Reservoir Grommet
This is a direct replacement for MB part number A1299971681: "Grommet under oil reservoir", found on W124 estate/wagon models with SLS rear suspension. It mounts the SLS oil reservoir to the chassis. The primary STL has a tighter fit than…
- Downloads
- 23
- Likes
- 11
- Rating
- 0
P
PrintablesPushkin
W1209WK thermostat
This model was designed by me and is free to use. If you print it, please share your feedback and a photo. The original AutoCAD project is available upon request. Print details: Printer: Ender 3 V3 SE Filament: PLA, black (6.74 meters /…
- Downloads
- 19
- Likes
- 1
- Rating
- 5
P
PrintablesBiHor3dExtras
digital termistor thermostat w1209
It is flash with mounting surface. In case that surface is not flat you can heat edges and make them curve according to curvature of mounted surface for tighter fit and nicer look. Support me: Monero address:…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesFelix Fischer
Gridfinity Nitecore FX1 Holder (+ Fujifilm NP-W126S Battery)
The footprint of this model is 2x2.5, so it essentially occupies 2x3 gridfinity units. The main compartment holds the Nitecore FX1 charger for Fujifilm NP-W126S batteries. I modified mine to take usb-c from the side, so there is a cutout…
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesCPS_Systems
Ecowitt Gateway Stand Desk Shelf GW1200 GW1000
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesFedi
Schaublin 70 - W12 Protection Nut Bolt Replacement
Schaublin 70 - W12 Protection Nut Bolt Replacement Printing: Material: PETG/PLA Layer high: 0.20mm Infill: 15-20% Supports: No Brim/Raft: No
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesMichael
PrusaBox w1219 Temperature Control Housing Cover
Cover for the Temerature Control in https://www.prusaprinters.org/de/prints/75281-prusabox-w1219-temperature-control-housing
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesPavel Necas
Mercedes Benz W124 Sacco Front Door Wood Trim (Sedan)
Hello everyone, My door panel wood trim was completely gone on in my W124, therefore I have concluded I should take a shot on creating a replacement. The trim is quite long, so therefore it was split into two parts, making it compatible…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesakaboomer1413
Krytka Termostatu w1209 / Thermostat w1209 Cover
Jedná se o jednoduchou krytku na termostat w1209 s prostorem pro schování kabelů. Doporučuji tisknout z PETG. Při montáži samotné krytky doporučuji mezi záda desky termostatu a “zdi” vložit destičku z lisované pěny cca 5mm širokou, aby…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesAudiotec Fischer GmbH
Helix IQ W12 Subwoofer Stand
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesMárcio
soquete interruptor vidro esquerdo m.benz w123, w126
soquete interruptor vidro esquerdo m.benz w123, w126
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesStarwhooper
Canovate Logilink W12A54G patch cable storage
Often i need short patch cable in my network shelf. Now i 've always a handful on left side (if you mirror the model, you can also use it on right hand side) Category: Computer
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesTraumatized Tuna
W1209 Display Riser
Public domain CAD files for W1209 and other parts and devices available on GitHub.
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesHoopy
Skadis mount for Sodola SL902-SWTGW124AS switch
Mount your Sodola SL902-SWTGW124AS switch to an Ikea Skadis board. You need two M3x8 countersunk screws to mount the parts to the bottom of the switch. You also need these T-nuts to screw the holder to the board. Update 2026-06-15: I've…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesSponge holder
w12 engine block
this is engine block for a w12 engine the model is fairly large about 7 inch cube the image is scaled down version original model prints in 5.5 days and 15 bucks using pla on a prusa 3s
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesHoopy
Skadis mount for Sodola SL902-SWTGW124AS switch (upside down)
This is yet another mount for a Sodola SL902-SWTGW124AS switch to bolt it onto an Ikea Skadis board. Compared to my other one , this one mounts the switch upside down onto the board which makes seeing the LEDs much easier when the switch…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printableshijae
llano cm3 fujifilm np-w126s battery charger cover
llano cm3 fujifilm np-w126s battery charger cover
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesRaptor3D
Framework 12 Standalone Node // FW12 RECON
The FW12 RECON is a rugged, tactical-inspired standalone chassis designed to convert the Framework 12 Mainboard and its internal battery into a fully portable, ultra-compact micro-computer. Built with a Cyber-Sci-Fi Utility aesthetic, it…
- Downloads
- 3
- Likes
- 4
- Rating
- 0
P
PrintablesNavya Singla
FW12 Core – Modular Case for Framework Laptop 12 Mainboard
FW12 Core – Modular Case for Framework Laptop 12 Mainboard What happens to your old mainboard? Framework laptops are made to be upgraded, and every upgrade leaves a fully working mainboard behind. The Laptop 12 mainboard is a complete…
- Downloads
- 3
- Likes
- 2
- Rating
- 0
P
PrintablesGFS
![Speed limiter lanyard, safety pin. [Zrywka] KW12-3 Micro Roller](https://media.printables.com/media/prints/d8360b48-bec7-48c4-b223-a826b478a03d/images/13381603_c3a95053-f798-44ac-b628-bf461e89e544_7e0e29a5-369a-4bf2-803e-39f5b899047f/w1.jpg)
Speed limiter lanyard, safety pin. [Zrywka] KW12-3 Micro Roller
Road-legal mode lanyard. A breakaway device that allows you to instantly lock the vehicle's maximum speed. Activated by a microswitch and a cable pull. Micro Roller Lever Arm Limit Switch - Model KW12-3 NO/NC (Normally Open/Normally…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesBlaine Mitchell
DeskLoft Camera Battery Storage / NP-W126
This is part of my modular monitor riser ecosystem "DeskLoft", this camera battery storage add-on keeps your NP-W126 batteries nice and organized and placed out of the way. It features tool-free installation and removal, and it's a…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
PrintablesOmgTheyKilledKenny
Tenda Nova MW12 wall mount
A remixed version of https://makerworld.com/nl/models/1391356-tenda-nova-mw6-wallmount to fit the Tenda Nova MW6 with sturdier slide-in supports than the original. The cutout for the cables in the picture is just a negative volume you can…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
HELIX IMPACT IQ W12-DVC2 - stand - new version
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
P
Printables
Ecowitt Gateway Stand Desk Shelf GW1200 GW1000
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
P
Printables
W123 Mercedes Ashtray Replacement
A replacement for the ashtray in a W123 Mercedes. The shallow plate turns the space into storage. The extended plate is flush with the surface. There is excess space beneath the extended plate to allow for a 12v outlet or USB ports that…
P
Printables
w12 engine block
this is engine block for a w12 engine the model is fairly large about 7 inch cube the image is scaled down version original model prints in 5.5 days and 15 bucks using pla on a prusa 3s
P
Printables
Mercedes W124 Sacco Trim Mount Kit - Missing Upper Pin
There is a missing mount trim from Ptashek's mount kit for the W124 Sacco panels, so here is the addition. I personally print in PETG, it doesn't need supports.
P
Printables
Enclosure for W1209 thermostat
Don't forget to give a like if the model was helpful to you. Update 12.02.2024 You can choose between two versions: the old version and the new version where I fixed some issues.
P
Printables
Fujifilm NP-W126 Battery Case
Awesome Fujifilm NP-W126 Battery Case with lock and simple ejection. The designer aIso incorporated a feature to use the battery orange tab as an indicator wether the batteries are charged or not. If you don't mind about this, the case…
P
Printables
W1209_Case
If you own a multicolor printer the buttens with + and - are for you the have a minimal cutout that you can color like i have done. Happy printing
P
Printables
Mercedes W124 Cupè (1984)
If you want to get this template without subscribing, write me in chat! - SideSilhouette
P
Printables
Case for W1209 + HLK-2M12
Temperature-controlled mains electricity. The W1209 + HLK-2M12 is in an all-in-one case. Only mains (120 or 230V) go in and out of the case. You must pause the print before 8.4mm to drop the nuts in. Pause is set in 3MF file. Bill of…
P
Printables
W1219 Temperature Controller Enclosure
This is a snap fit case for W1219 temperature controller module The board itself need to be attached to the base with screws and lid is snap fit It has three different parts: Bottom Base, Top Lid and Switch (x3) All three parts could be…
P
Printables
Battery Case for Fujifilm NP-W126
Minimalist battery case with friction fit. Printed in Polyterra PLA on 0.4 nozzle.
P
Printables
Box for W1209 Temperature Controller
Box and lid for these temp controllers. https://www.amazon.com/gp/product/B07PFC4FH1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Print Settings Printer Brand: Prusa Printer: i3 MK3 **Supports:** No Filament: Coex PETG Category:…