Counting matching models…
This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Eine Verbindungsdose zum Verschrauben für 3 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Kabel Durchmesser ca. 9mm Das Gehäuse ist anschraubbar und der Deckel kann mit M3er Schrauben oder 3mm…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Eine Verbindungsdose zum Verschrauben für 2 Stück Wago 221 2411 Durchgangsverbinder. Die Zugentlastung erfolgt mittels Kabelbinder. Eine Seite für Kabel Durchmesser 9mm , die andere für Kabel 4x6mm.
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
Immer beim einkaufen fehlt mir ein Chip oder eine münze für den Wagen
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I modified my Humvee M998 into a civilian version. I made some tweaks and improvements to the model, added more details. I also made the axles thicker. I printed it using PrusaSlicer organic supports so it wouldn't be as messy near the…
Print approx. €16.60–€20.29 excl. taxPreliminary estimate for one variant
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Volkswagen Golf Mk4 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Verbindungsgehäuse für Leitungen bis zu 6mm Durchmesser. Der Deckel wird mit dem Gehäuse Zusammengesteckt und die Leitungen können mit Kabelbindern fixiert werden.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Ersatzteil an den Original Wagen angepasst
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
No support is required for printing. 0.2 mm layer with 0.4 nozzle. This Owl Woggle Scarf Ring is intended for Brownie Guides leaders affiliated with the WAGGGS association. In Argentina, Brownie leaders are referred to as "Owls," and they…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Motivation I want to use solar panels of an old solar system (Conergy C175M) in combination with a Microinverter for a balcony power plant. [A: Panel groups connected in parallel] As the panels have low power values (compared to current…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Jeton in der Grösse eines 1 Fr. Stücks, um Einkaufswagen zu entsperren. Gedruckt in PLA, 100% Füllung.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Klemmenblock von Hensel DK0404 wird durch Klemmen von Wago ersetzt. Es gibt drei verschiedene Varianten. 4x 221-415 Wagoklemme (also für je 5 Adern pro Klemme) 6x 221-413 Wagoklemme (also für je 3 Adern pro Klemme) 8x 221-412 Wagoklemme…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Die Halterungen sind geeignet für 5fach Wago Klemmen vom Typ 221. Die Klemmen werden nach der Verdrahtung einfach senkrecht in die Halterung geschoben.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
Stell dir vor: Du bist auf einem Festival, die Sonne brennt, die Musik dröhnt, und der Bollerwagen ist randvoll mit Getränken, Snacks und guter Laune. Aber: Das ewige Problem – wo soll das Bier hin, während du tanzt oder den Wagen ziehst?…
Print approx. €2.82–€3.44 excl. taxPreliminary estimate for PETGSource material: PET
Halter für das Zubehör am Schlauchwagen.Hab es aus PETG gedruckt.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Ich fahre manchmal ein Brennstoffzellenfahrzeug das mit Wasserstoff betankt wird. Da ist es immer gut, einen passenden Einkaufswagenchip dabei zu haben.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Dies ist ein 3D-Puzzle in Form eines Lastwagens. Außer den Druckteilen werden 4 Kugellager 6x19x6 benötigt. Die Reifen sollten mit Flex gedruckt werden. Alles Andere ist PLA. Teile mit x, gefolgt von einer Ziffer im Dateinamen müssen x…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Extra Boden der unter den Rollwagen geschraubt wird. Metabo hat hier bereits Bohrungen für Schrauben vorgesehen. Sollte möglichst massiv gedruckt werden, falls der Staubsauger mal über eine Stufe gezogen wird… Support Filament: PETG
Print approx. €11.41–€13.94 excl. taxPreliminary estimate for PETGSource material: PET
Endstopper für Wohwagen T-Schienen. Es wird noch ein Gewindeschneider M4 benötigt. In die Flügelmutter und die Klemme muss noch ein M4 Gewinde eingeschnitten werden. Danach kann mit einer handelsüblichen M4 Schraube M4x12 die Klemme…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a tray, for use with Robert_28442s modular tray system . The concept is simple: Why not utilize WAGO clamps in a 19" non-DIN rack environment? For rack builds, who want to utilize WAGO 221-2411 clamps, either without din rails or…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Verschiedene Arten von Haltern für Wago Klemmen. Es exestieren Schraublöcher.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Es handelt sich um einen Halter der in die Aluschiene eines Wagens für Flächenvorhages
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Das Modell wurde von mir selbst erstellt und Modelliert. Das Beispielbild (Titelbild) wurde mit KI generiert. Ein Einkaufswagenchip / Token mit einem Loch für den Schlüsselanhänger zum holen eines Einkaufswagen, praktisch wenn man keine…
This shopping cart chip is designed for shopping carts in the EU/Germany. The chip is made of durable material and has a special shape that fits perfectly into the slot of a shopping cart. The chip is easy to use - Just insert it into the…
Watch here: https://youtu.be/cv1QyHBbdzw This is my take on a VW Bus model. It's not 100% accurate to any specific year. I was just going for a 1970s-ish VW Bus, and it's missing a few details that would have made it significantly more…
Print Settings Printer: Prusa MINI 0.25mm (green print) Prusa i3 MK3S 0.4mm (blue print) Rafts: No Supports: No Resolution: 0.15 Infill: 100 Filament: Prusament PETG
Summary This is a model of a Volkswagen Golf 1 GTI in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate front spoiler and exhaust :) After printing, the model can be assembled with the help of…
Modeled in Fusion 360. Based on Tiger 131 at the Bovington Tank Museum. 2 versions of the tank are provided, one with the feifel air filter system attached, and one without them. The Tiger I was a German heavy tank of World War II that…
I wanted a good DIN Mount for my Shelly Switches to mount them properly into my electrical box, but all that i found did not really satisfy me. So i made my own inspired by severel other designs with these key features: vertical…
This is a model of the czech freight wagon EAS suitable for H0 railway models. It is possible to print it using SLA or FFF printer. See more info at: https://blog.prusaprinters.org/3d-printed-railway-models-part-ii-trains-and-buildings/…
Designed to attach the thinner Wago 221 junction boxes to anywhere using M3 countersink bolts. There is a 2.2 mm diameter hole on the back of the mount parts so you can merge them by using the standard 1.75 mm diameter filaments. I have…
Chceck also other models https://www.printables.com/@Jerryie/collections/2044634 . Easy to assemble. -Two colors -organic support -0.15 layer height
This is a power distribution block that uses Wago 221 connectors . It comes with many different mounting options and a base model is available in STEP and STL to easily remix and make your own mounts. You can use it for whenever you need…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Volkswagen car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
DIN Rail Mount (35mm) in 3 different versions. 221-412 221-413 221-415 Material: PETG Support: Yes / Everywhere Infill: 25% Resolution: 0.2 Perimeters: 4 Update: 221-412 for 4 Wago 221-413 for 4 Wago 221-415 for 4 Wago Update 26.04.2025…
Shopping-Cart Coin Simply insert it into the slot, release the shopping cart and pull it out again. Corresponds to the size of a 1 euro coin. Einkaufswagen-Chip für alle Einkaufswagen ohne Schublade Einfach reinstecken, Wagen lösen und…
Cable extension box using the WAGO 221 inline splicing connector. Benefits Compact. Very strong strain relief. Mountable with countersunk screws. How to make Print in PETG, because it is more fire retardant than ABS or PLA. Insert WAGO…
Slim mount for Wago 221-41* wire connectors on the standard DIN rails. These models are perfect as leftover or wiping tower models. Update #20230417: added double and triple versions. Update #20240922: uploaded Fusion 360 source file.
Small surface mount box, for hiding cables and wago connectors 2024.02.20 - I added a model with a slightly lower housing
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…
Loved the original design but needed ones for the 3 and 5 slot version. I would suggest printing them in at least PETG. I printed them in PETG-CF as they come out looking more professional than normal PETG. Check out my other WAGO designs…
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Works on the most Shopping carts in germany. Push it in turn it sideways and remove it.
Description: These snug-fit mounts are designed for WAGO 221 connectors, offering 11 different variations to accommodate 3 and 5 connection WAGOs. The mounts are functional when the WAGOs are in place. To release them from the mount, use…
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
A three row WAGO 221 for 35mm DIN rail mount. Prints laying on it's side. I set the height to 29mm to fit 5 slot WAGOs. You can easily set the height in your slicer to accomodate any WAGO size.
VW Beetle, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
This 3D printed shopping cart coin is a practical everyday accessory designed to replace standard supermarket coins. Double-Sided: 😊 Smiley version 🛒 Shopping cart logo version Printing Recommendations Layer height: 0.2 mm 3 perimeters…
Used Hugos Snaplock box because I love the fact it requires no hardware or filament tolerances. This will hold 3 set of the 50 piece collections from Wago.
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
UPDATED: VERSION 2 - WAGO connectors now snap in place without moving (thanks to @pulsar ). - Lid screws are now not exposed but hidden in the lid. - Added support for WAGO 221-613 Design This Hexagonal design is meant to help with cable…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…
Tištěno z PETG. Na panty jsou použity šrouby M3 6mm, je trošku pakárna je tam dostat. :-) Pro snadný tisk rozděleno na 2 části a poté slepeno.
The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution. My mount accommodates two,…
Hello, this is a model of a HO scale railway wagon, that can make 3 different wagons: Print just the bottom part and you'll have a container platform; Print the bottom part, add some decking and you'll have a platform wagon. Print all…
This is a giant Wago clamp box. You can store your Wago clamps in it or anything else that fits. It was printed in Fillamentum crystal clear and 3Djake neon orange. It prints without supports in the orientation shown. But adding some will…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Small surface mount box, for hiding cables and wago connectors
Version 2 of my Panzer VI Tiger 1 design. I know it's really popular, so I decided to remake it. It has even more details, and is better proportioned. I remade the treads and the wheels. It's scaled 1:42 this time. The turret rotates and…
DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…
This is a Wago 221-415 Mount for my DIN Rail Bracket. You can find the bracket here ! There are several versions, for 2, 4, 6, 8, 10 and 12 Wagos. STL and STEP files are without labels and can be edited to your needs. For the DIN Rail…
A simple Volkswagen logo keychain I made for my father. Dimensions (mm): 42.07×47.47×2mm Dimensions (imperial): 1¹¹⁄₁₆×1⅞×¹⁄₁₆in KO#2
can be printed together the model needs to be glued together or separately in other colours the VI Tiger tank is very realistic Print in place kit card , Assembly required need to use a support the cabin can be rotated 360 degrees
Tiny Tank – Tiger i 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the theback part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Introduction Here's an interesting one, the Volkswagen Thing. The Type 181, as it was originally called, started as a cheap military vehicle built for the West Germany in the late 1960s. It was a mashup of parts from cars like the beetle,…
For more logos : +100 World famous logos (+DXF) par Referentiel | Téléchargez gratuitement un modèle STL | Printables.com
Hi. You maybe know the stowage project by some guy here on thingiverse. Welp this is its buffed version. They are remixes of some crate that i made better and compared it to oficial parametres and things i found exploring the internet for…
When I printed the “wago” mount for my Voron 2.4 build, I found my connectors did not fit the slots on the model. I realized the clips I had were knockoffs and not Wago by brand, however even the measured size of the slots is smaller than…
This is a see-through Volkswagen keychain for the VAG lovers! :) Ready for printing! :)
📝 Description This 3D printed adapter allows you to use a Parkside 20V Li-Ion battery as a portable power source via WAGO 221 connectors . It features M2 heat-set inserts , which make the assembly solid and professional — no glue, no…
In Line Wago 221 Junction Box, perfect for splitting 1 wire to 2 wires. Compact design
Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. I run several of these wagons successfully on my Märklin model railway. The wagon in the picture…
Dash air vent grille for Volkswagen Transporter T4. Replaces original part 701819071 or 701819072. Added top honeycomb to prevent objects from falling into the vent. The attached model is intended for the right side, to print the left…
- Wago 221 Connector SnapOn holder - Connector snaps into place - holes to be screwed down - measuringpoints stay accessible - holders are ment to be placed next to each other in the slicer to get every number of slots you need (9mm…
A simple “coin” with a VW logo for you keychain, that you can pull out of some shopping carts, if you don´t want you key dangling around. I printed it in two colour so you can see th VW logo. (simple colour change at layer) This is a…
Wago holder attached with a screw
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…
This simple housing lets you mount your Wago 221-2411 nicely on a 2020 (or 3030) extrusion. No special printer settings are required, but I recommend ABS/ASA material, especially when you are working with a heated chamber. BoM: 1x housing…
This container wagon model is printed in parts that are glued together. Detailed building instructions are provided in a separate PDF file. The wagon in the picture was printed with a Prusa i3 MK3S+ with 0.4 mm nozzle. The CAD files were…
This is a scale model of a sggmrss container car. Included are fitting Y25 bogies. The bogies and waggon parts connect together via clips. The frame has holes for either piko containers or pins can be glued in for other containers. The…
Nice model of a timeless classic! Looks great as a desktop decoration. Also makes a perfect gift for any Volkswagen-loving friend!
This is a simple Volkswagen Script Badge. Usually seen on old VW bugs. In comes in quite small on the print bed. I traced it off of an image. The cover image is an example of what it could become. You will need to scale it up by 5x to…
![Wago 221 Junction Box for flex wire 3 core, 4 core or 5 core [compact]](https://media.printables.com/media/prints/785036/images/6155619_7f611648-fcbe-4d7b-8a40-1e9c82a991ab_a116373d-3766-4495-8e82-8ec115aa0a7e/pxl_20240304_202509674_scale.jpg)
