11,123 models
This toy is designed you get a click feeling sensation when you rotate the wheel. Slim body for cool appearance and good click feel! What is Fidget toy?: A fidget toy is typically a small object used for pleasant but purposeless activity…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
Print approx. €40.45–€49.44 excl. taxPreliminary estimate for PETGSource material: PET
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Hanger that slides onto the bottom of Hot Wheels Track. Then hooks onto string or cable. Note: Print file is four (4) hangers, an individual hanger takes about 20 minutes. Testing shows about one hanger per two pieces of track for best…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
A remix of a hot wheels car ramp extending it to fit 1/64 scale monster trucks! (hot wheels or monster jam). accepts two standard hot wheels track connectors to help line up monster trucks for the big jump! print oriented with the Xes on…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
Print approx. €6.68–€8.16 excl. taxPreliminary estimate for one variant
Just a simple wheel stopper Print instructions 0.3mm layer height (or more if your printer can) PETG, ABS or any outdoor resistant filament Fusion 360 file included
Print approx. €22.99–€28.10 excl. taxPreliminary estimate for PETGSource material: PET
Very old barrel in a wheelchair. Originally the barrel was supposed to be separate, the cart is part of another project, but the combination is very successful. Press the barrel and wheel rims separately and use the collar to prevent them…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Basic track connector for hot wheels track
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
Print approx. €6.01–€7.34 excl. taxPreliminary estimate for one variant
I wanted to draw something after the bathtub boat which floats but still looks good on the desk. The idea of an old paddle-wheel steamer was buzzing in my head. You can see what came out of it. It took a few approaches but I am satisfied…
Print approx. €5.17–€6.31 excl. taxPreliminary estimate for one variant
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Wanted to create a way to make wheel sets for HO railway cars. Two parts wheels and axle, easiest to print separately. I recommend doing 4 axles at the same time, works best with my Prusa. To get them glued in all the right angles, print…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Simple but effective support for plants that are not able to support themselves. Fits standard ⦰5 mm wooden plant sticks, but the size is configurable in the source code. You can use more than one support wheel on the same stick if…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A Chair Wheel stopper originally designed for the Secretlabs Titan. The Wheel have an diameter of ~61 mm and a with of 55 mm. The stopper has 2 embedded holes for 10x2 mm magnets for organisation and 4 holes for 10mm silicon feet to…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
🎮 Introducing the 3D Printed Wheel Holder for Simucube QR Wheels by Veracon Engineering! Elevate your sim racing experience with our precision-engineered wheel holder designed specifically for Simucube Quick Release (QR) wheels. Crafted…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Hi i designed a Wheel for my Worx Landroid (Worx Landroid M-500) because we have a uneven garden so Ive designed a wheel to fix issues when my wheel gets stuck, and it not get over our stones try it yourself and Test it! I Hope it can fix…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
The case looks like a smiling mouth. Print Settings: Material: PLA, PETG Layer height: 0.15 - 0.20mm Supports: no Perimeters: 2 Download Gear wheel and Spring here: https://www.printables.com/model/231691-fidget-clicking-wheel-20 My Other…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Standard 1:10 RC car wheel adapters. Print instructions 3D printed tires weren't cutting it for us on our OpenRC F1 cars. I made these adapters so we could mount cheap, standard 1:10 RC street tires and wheels on them. We've only just…
Here, i want to share with you my Wheelbarrow Planter, that i made for my Garden. It was designed, so that it looks like it was made out of wodden Parts that could be found somewhere in a Forest. Its Ideal to be used with other Cartoon…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy-to-print platform for supporting the balance wheel during a watch service. It is similar to Bergeon item #7990 “Support for Cleaning the Impulse Pin”. In addition to allowing for cleaning of the roller jewel, it makes a…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Car lift for hot wheels. Printable with no supports. I used PLA and it turned out fantastic. Rigid and easy to assemble. This is my first model so any and all suggestions, questions, comments are welcome.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Update 2: Added a version that is a cover ring that snaps onto the existing Ender 3 wheels so you don't have to print a whole new wheel if you don't want to (less clean finished product but no insert needed.) The cover snaps firmly onto…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
Silent hamster wheel 190mm diameter with mounts (screwed directly to the cage). Update 10.06.2022 added hamster wheel with 215mm diameter and modified version wheel nut (models names wheel 215 and wheel nut 215 ) modified models for…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Swivel wheel. Diameter 5cm, 2cm depth, to use with bolts to fasten. Required hardware (per wheel): 608 bearing 1x (can also use 2x) metal or https://www.printables.com/model/541192-print-in-place-bearings M5x30mm + 2x nuts + 1 washer,…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for PETGSource material: PET
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…
UPDATE: Uploaded new wheel STL. Replaces a wheel clip (and optionally a wheel) on the top rack of a Bosch dishwasher. The clip fits OEM wheels too. Printing: Clip Support everywhere 0.2mm layer height, 3 perimeters, 100% infill Slow down…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This gear wheel fits perfectly to the chain with 3 mm balls for blinds. When first fitted to the engine shaft, the gear holds very firmly. I recommend that after the first time it is put on, you use a kitchen knife or spatula to pry it up…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
90 Degree track pieces that allow you to connect two of the Hotwheels Track Displays (https://www.printables.com/model/778227-3-tier-hotwheels-track-display) together forming a mega display that can hold 42-44 cars!!! fast and easy to…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
A knob for your printer, to turn round the elegant way
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
hi, i made this sqared wall piece and im planning to expand all the extensions and other cool stuff so if you have suggestions or any other comment make sure to let me know (just send me a message) tips are also very welcome
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Designed a tunnel for my hotwheels fanatic. It's a 4-lane tunnel for four cars or 2 (1:64 scale) monster trucks. The standard hotwheels connector fits on both sides. The top has a row of holes, for a hotwheels emblem. The emblem also…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
After my old wheels are broken i wanted to buy spare wheels but they only sell them including the basket for 75.90EUR!! So i designed my own. Everything can be printed in one piece. The necessary supports are already included in the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Practical holder for grinding wheels. Very strong material, PETG or PCTG. Diameter 125 mm. Fits very well on the diameter. Made with a small cone to prevent the wheel from falling.
🎮 Introducing the 3D Printed Wheel Holder designed specifically for the Fanatec Quick release Wheels, a must-have accessory for every serious sim racer's setup. Crafted with precision and functionality in mind, this wheel holder…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a little windmill that adds a little color sport into your e.g. garden. It's mainly a 200mm x 200mm x 0.4mm flat sheet of plastic with some mounts for the bent wings and a 10mm stick. If you like this thing, you might want to…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for PETGSource material: PET
Simple design to learn about car steering wheel No support required I have a plan on create mini driving gear with force feedback for my future RC car, and also able to play Euro truck simulator 2. A very long way to go Outer diameter:…
Print approx. €7.39–€9.03 excl. taxPreliminary estimate for one variant
I decided to remix @Alberto Digital Caliper Holder after a few weeks of use I noticed my caliper would slant to one-side after taking a closer look I noticed that the fine adjustment thumb wheel on my caliper was coursing the issue…
To make the Lamborghini Diablo more authentic, I created rims in the same design as the original. Lamborghini Diablo The original rims are too wide and the tire doesn't fit properly. Model: Lamborghini Diablo front - Rim diameter 64 mm x…
Print approx. €13.98–€17.08 excl. taxPreliminary estimate for PETGSource material: PET
This model is one from my extensive Children's Toys Collection . This wheelbarrow with garden tools is composed of 17 individual parts. Ideal also for children to tinker. Alternatively, you can fill the wheelbarrow with Easter eggs. One…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
1/64 Diecast Car Display Stand: Compatible with Hot Wheels, Matchbox, and More! Fast and Easy Printing.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
Print approx. €2.65–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
This is the result of the “3D Modeling in Fusion 360” course from Prusa Academy. I had previously written the wheel in openscad, which you can find here: OpenScad Wheel The uploaded files are made for my Wolf A4600 Lawnmower. This one is…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
This handy and nicely clicking damage counter is small and satisfying to use. Only 5mm height. Other side of the counter you get numbers 10-100 in 10 point steps and other side of the wheel numbers 110-200 in ten points steps, I had a bit…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Quietly Clicky. Fits & Fun. Bearing 608 x1 Magnet 5Φx2mm x18 Tested with 0.2mm & 0.15mm layer height. Magnet poles can be aligned towards center or altered one by one. I prefer altered. I wanted a fidget toy for my working hours, but…
Small steering wheel Audi.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous seasons. Description My V1-wheels solved most of my issues that I had with the original Bosch wheels but there was 1 problem that I…
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Wall Hanger holds 10 cars. Spacer piece goes between 2 of them for larger cars or bikes. You can scale the width for any gap you want. (My dude likes bikes so these are 5") I printed mine with 4 vertical perimeters at 90% infill for the…
Print approx. €15.41–€18.83 excl. taxPreliminary estimate for one variant
I got inspired by the silent front roll (TPU) from nks . This is a remix to fit a Roomba S9+. Print the axis in PLA and the wheel in TPU. Then just replace the original wheel. No additional hardware is needed. Other Roomba models use a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
9 position manual filter wheel for 1,25" diameter filters. My equipment is very heavy and the hobby of astronomy a little expensive, depending on the level of dedication you want to achieve. Because I like to do things myself, I designed…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
20.1.2024 Another week point found. :) So here is version 3. Added rib to Slider to add overall stiffness Adjusted geometry of pins that push joy con buttons. Now you can feel and hear response when you push Paddle. bgcode and project…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
This is designed to use one screw to hold scale model cars. Went with single-screw countersunk mount to enable show-park mode. f3d file included if you want to adjust hole quantity/position/size. The wall mount as it is currently sized…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This model can simulate 3%/5%/7% incline for my bike. 7% is perfect for a Road to Sky ride. My tyre is 700C x 25mm, but it should be okay for 30mm. Material: PLA Infill: 15% Perimeter: 4
Print approx. €11.88–€14.52 excl. taxPreliminary estimate for one variant
This is an easy to print wheel that helps you knit as much cord as you like from 7 strands of wool. How to use it Cut 7 equal lengths of wool and tie them together at one end → the final cord will be about 1/3rd shorter than the lengths…
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
This M14 cap protects your screw from harsh environment.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Print approx. €11.26–€13.76 excl. taxPreliminary estimate for PETGSource material: PET
Used on Foxbody Mustang to calculate needed offset for wheels and tires after adding fender flares. Measured a 18x10.5" wheel and 315/30 (25.5"x12.5" Tires). Has the ability to test inside and outside offset measurements for…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Set of HotWheels and Matchbox logos. Use a pause in height to change color. STEP logo files are included and can be edited. For non-commercial use only. Printer setup: Nozzle diameter 0.25/0.4/0.6 10% infill Layer height 0.20mm no supports
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Vortex Strike Eagle 5-25x56 Parallax Wheel. ID of wheel is 35.35 mm. Hardware required: 4-40 x .375 Socket Head Bolt and 4-40 nut. Filament: Prusa Black PETG
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Llavero con símbolo de Treasure Hunt de Hot Wheels. Imprimir a dos tonos.
Stylish Wheels
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Simple wheels for 56x39x28cm size SAMLA box from Ikea. None solution from thingiverse worked for me, they are probably for different size or version of the box. So this was build from scratch in Tinkercad (feel free to edit:…
Print approx. €1.72–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Fits to MK3/MK4 bed when placed diagonally.
Print approx. €7.58–€9.27 excl. taxPreliminary estimate for PETGSource material: PET
Very stable wheel chock for diffrent weel sizes. Universal use is possible as well. I calculated the inner structure to be stable and to use as little filament as possible. Wheel diameter R10 = 480mm Wheel diameter R17 = 640mm If you want…
Wheels for the HP OTTO robot using a standard O-ring as a tire. Includes 3 designs for different themes: fire, space, and wooden wheel. For the tire, I used 2× O-ring 50 × 3.5 mm (R29 from a Parkside set). Kola pro HP OTTO robota s…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Dishwasher wheel retainer for a KitchenAid dishwasher. Used Esun Filament.
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Low cost hotwheels hanger. You can hang as many Hot Wheels as you want. First you have to nail or stick on double-sided tape the first stl. Then you can hang as many hotwheels as your tape or nail will hold.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a…
Print approx. €7.01–€8.57 excl. taxPreliminary estimate for PETGSource material: PET
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
I love you Mom I hope everyone gives you hearts! My Mother has a spinning wheel thats over 130 years old passed down in our family from her mother. My dad made a bobbin for her on his lathe but cut the center a little bit off (it rattles…
Spare roller runner wheel 00611475 for lower basket in dishwasher. Genue wheel used in Siemense, Bosch and Neff washmachines. Dimensions Model diameter 35mm, height 13.5mm. Print settings Model is printable without supports. I recommend…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Material consumption 150g PETG. Use SUPPORT for middle hole. Designed in ONSHAPE . ------------------------------------------------------------------------------------------------------…
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter for a generic "Steering Wheel Button" available from Amazon, Aliexpress, etc. to mount it naturally at the same height as the steering wheel. I recommend printing face down, with supports to hold up the base for the…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Great Replacement part especially because this part breaks a lot on whirlpool dishwashers. If you could add your user print files-the gcode files you use-to the user print files section that would help a lot of people when printing this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Bobble the head of your favorite Autobot Mechanical Engineer! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the…
Since the MMU3 can have issues if there is too much tension in the filament, an easy upgrade to reduce friction is to upgrade the plastic wheels in the spool holders. Skateboard bearings are great for this. To use this, you will need to…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Simple spacer for stacking your RLC ( Hot Wheels Red Line Club ) Cars. No supports needed.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
The demonstrator of cog wheel 02 is a result of engineering done step by step from desing to production. Cog 20. Modul 2,5. Ra=da=55mm. Axis distance 50mm.
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
I created a simple clip to attach a spare wheel to the bonnet of the landy like the military vehicles and the ones who participated in the legendary Camel Trophy. in order to make it work you have to drill a 6,5 mm hole in the bonnet (see…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a VW-compatible 56mm wheel center cap , designed as a 2-part system for superior fixation and an OEM-like appearance . Model size: 56 mm (outer diameter) – common VW standard Common VW center cap sizes: 52 mm 55 mm 56 mm 60 mm 65…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
