428 models
A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I made the Body out of TPU / FLEX.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Basic z-axis wobble test. Height: 60mm You have 2 options just x and x&o.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Hotfix for Z axis wobble (Anet A8 Plus) With the factory parts, the Z rods of the Anet A8 Plus are wobbling terribly. There are two parts per side in the game. On the bottom is the motor mount which includes the 8mm diameter hole for the…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
They are weird, they are cute, they are fun - and oh, they are wobbly ! A fanart design from my favorite game this year: Wobbledogs . Mingle is the first dog that you get in the game, a basic good doggo that teaches you how to play. I got…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Wobbly - The Slope Walking Automaton robot by Cevinius. Print instructions I used the Prusa silver PLA came with the MK3S to print this.
Print approx. €6.40–€7.82 excl. taxPreliminary estimate for one variant
This is a simple ball printed in two halves. One half is printed with 90% infill and the other 10% infill. When assembled the mass of the ball is off center so it rolls erratically making it more fun for cats to play with. There is a…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Clip-on sleeve for (wall mounted) Prusa spool holder to limit variable tension of the filament on the printhead due to the spool wobble movement while unrolling. easy to mount. no rotation of the sleeve thanks to a little location bubble…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
I designed this to be a quick (<30 min) and easy Z wobble test to print on any printer where Z wobble is suspected.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Wobbly checkers pieces! This is the checkers companion to the Umbra Wobble Chess set. The included gcode is for a 0.6 nozzle, and the infill is 20% for the first 10mm, then 100% for the remainder. I don't think that the 100% infill is…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
Using a flexure spring and an over-center mechanism to create the classic toggle switch in an interesting way. Shouldn't need any lubrication, but like all mechanical prints, it can benefit from a little oil, wax, or soap in the joints,…
Simple test for testing your Z axis
Hello, here a wobble track for a marble run. Here a Video Here a other Video from someone else on youtube I would be happy to see some makes from you. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No…
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
A cute and tiny Christmas tree with wobbly legs. (40mm tall & multi-color -profile available!) The perfect Christmas gift or decoration accessory for your house! Works right off the print plate! (may need some wiggling to loosen the legs…
Inspired by bobble heads, this is a fun gnome Christmas decoration that can wobble side to side. There are two gnome designs to pick from: detailed and simplistic (each design uses the same spring and feet parts). The bobble head prints…
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
Remix with increased height, more premade STLs, fixed mesh and better stand without a slope. Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer. Print in an grey-ish filament and not white, since…
A quick test for testing out the Z-wobble of your printer. The model prints in under 20 minutes and features a 20x20x20 mm tower out of thin walls. To help with orientation, the test has a little knob on the top in a corner, oriented…
Anti z-wobble squares Metal Pins Here you can find updated version of anti z-wobble. (probably last version :) and only for direct drive) This design uses 32 additional metal pins (fi 2mm, length 8mm) on which steel balls are placed.…
When I printed the original Filament Spool Switcher & Winder, I had two problems with the axis: they where not easy to print because they're round and had overhangs at the hexagon ends resulting in not very precise prints the worm drive…
This model is a 40 x 40 x 200 mm tower that will help you visualize the quality of your layers in the Z axis. There are raised letters at the base to show the X and Y axis. It is easy to resize in your slicer if you need it shorter or…
Required for assembly: 3.5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 3 mm eyes Super…
Wobble X by MirageC is amazing. The CNC machined version has a nice finish and also works well BUT I'm too broke to buy a few pairs of it So, I designed a similar model based on a wobble x mock-up! ENJOY PRINT SETTING 0.4mm nozzle 0.16mm…
Flies slower and more accurately than v2, at the cost of reliability and build difficulty. Is more durable and can be modified more. Print with 100% infill in PLA. A brim isn't needed. Wait until the build plate is cool before removing…
As featured in: To assemble the lure you need: 5x 5mm stainless steel balls 3 twist wires using 0.8mm stainless steel wire 5mm eye If you have a different size wire or screw eyes and they do not fit, send me a message and I'll upload a…
I just made a already vary nice design into a keychain Wanna leave a donation, just follow the link : https://www.paypal.com/donate/?hosted_button_id=L4PM34S6PWBCJ Every donations goes directly into creating model, profiles and content…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
The Wobbly Weeblefly combines a spinning, rocking, and rolling egg shape with a butterfly that bounces along on a spring of sorts. The combination drives kitties wild! The egg's motion comes from a weight attached to the bottom of the…
Wanted to test out HexOrt inspired wobble wings on the ender 5 plus to see if it would help with layers lines. After about 2 months of testing, I can say they have significantly reduced layers lines on most of my prints. Will Need: 10mm…
The original washer is too low and loose + head screw housing in the chain cable is to large. So the cable chain is not firmly in piece one the toolhead, and it wobble when printing. This simple mod fix this issue, also helped me…
I grew tired of having my wobble sockets roll around in my tool box, so I created a 3x6 gridfinity tray to keep them in place. The tray is tall enough to keep pieces securely in place on a tool cart, but shallow enough to fit in the 35mm…
Z Anti Wobble This is a remix of the awesome Z axis anti wobble design by Tekti that uses filament pins. For 8mm lead screws. Nuts - with 18mm or 16mm spaced mounting holes (check the 16mm stl file). Not compatible with the stock bowden…
Wobbly Vase, designed to be printed in vase mode. Size: 13.1 x 12.6 x 20 cm Print time: 2 - 3 hours Scale as you like :) Happy printing 0.4mm (preferably 0.6 or larger) 0.2 mm layer height +0.6 - 0.8mm layer width 35 - 45mm/sec print…
This little toy is pretty simple. You fill the top with a handful of dry treats, screw on the base, and then put it out for your kitty. As they bat at the toy, it'll tip enough to drop a treat. The base should be heavy enough to return…
Guide made of TPU material for the Z-axis at the top so that it does not wobble.
made wobbly life flexi. this is my first try at making a flexi print. think its come out well. please upload makes on instagram and tag me @bellamys3dprints
Two versions included, one with a closed bottom and one with an open bottom (shell). I like the shell, printed face down. Made for Harbor Freight Pittsburgh Wobble Socket Extension Set . I taped off the top and then spray painted the…
Simple test to see if you have any Z-wobble. The print should be perfect smooth and round (with exception of the seam) I added a square version also that can help show z-wobble. If there is any z-wobble then the tube will have obvious…
At this point there have been enough success reports that I think it's safe to say this fits most trucks with fairly wide slots for 2x8" bed dividers. Known good list is below. I'm sure there is a reason the Chevy Colorado has about ½" of…
Hello there, I designed a Wobbler as seen in Maker's Muse video. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20 Filament: [ Prusament PLA…
Replacement locator pins for Dillon reloading presses and 9mm size cases. These put slight pressure against the case as it indexes and eliminates wobble and cuts down on powder spill. I designed these to fit in my RL1100 and I would…
Additional Jump compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The balls do a little jump. Very funny you put some of them in a row to let the balls wobble. Did some optimization for better printing,…
This is part of the z wobble fix for the ELEGOO Jupiter, all information can be found in the video so please watch it before you attempt. Please note that this involves drilling 3 holes in the top lid of the Jupiter. You will need 3…
This funny piggy bank in the shape of a cat can be printed without supports. Big enough to hold a lot of coins, which can also be easily removed again. An amusing thing, especially for children. Because the cat expresses gratitude with a…
Remixed the original model to hold both the Harbor Freight wobble socket extensions as well as the Harbor Freight set of socket adapters. Printed in PLA with 12% cubic infill.
For a long time I was looking for a solution to the layer lines that were present in all my prints ever since I bought the printer. As it turns out our cheap printers with their trapezoidal lead screws are horrible in this regard. I…
BOM: 608ZZ ball bearing x1 M3 * 20mm screws x2 M3 nuts x2 M3 washers x2 (optional) Full details found here on construction and how to actually correct z-axis found here: https://www.thingiverse.com/thing:4748680 Make sure you properly…
Instructions 1 - Print both halfs 2 - Insert 4x3 4mm lead BBs to the triangular lead holes 3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together 4 -…
Are you tired of walking ALL THE WAY over to your target cans to pick them up again after knocking them down? Have I got the product for you! The Wobble Can Target provides the perfect nerf or airsoft target practice tool. After being…
A basic model to test your printer for: Z wobble/banding, ringing after corners, pressure advance, seam and VFA. It also have indicator every 10 mm. Chose a size or take the biggest one and use the cut feature in your slicer to cut it at…
This is my disign for a ghost that can be printed in place and after printing you can lower the build in stand so it is free to wobble. how to print and use: print without support, after the print has finished you will have a middle part…
Basically a regular planetary or epicyclic gear, but with a novel approach in toothshape. The Background is, that regular 3D printer are working much more precisely when using round instead of sharp edges for a tooth shape. Perhaps even…
Based off of http://www.thingiverse.com/thing:1176934 . A wobbler type compressed air engine with main bearings and a display base. When running (see video) achieved a speed of over 3300 RPM. Bearings are 608ZZ. Spring is 3/8 x 3/4…
Dieses Teil verhindert, dass die Spindel der Z-Achse wobbelt
Trident-R1 rear WobbleX carriers CHANGELOG 01.05.2023: Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 26.04.2023: Initial release.…
This is a modification that tries to reduce Z-wobble by installing wobble wings on the lead screws of the SV06. Materials needed: Printed parts: 2x upper wing, 2x lower wing, 2x locking nut Heated insert 2x4*M3 2xM3*10mm screw…
Trident-R1 front WobbleX carriers CHANGELOG 01.05.2023: Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 26.04.2023: Variable pin sizes…
I had a wobble on my rear z rod. I made this little bushing to fix this issue. I printed 4 of it in different heights for variation to adjust the gap between the z rod and the top bearing (2x 0.6mm, 1x 1mm & 1x 2mm) Print in ABS or at…
This is a 3 part print, which should print under 2 hours on most printers, It is in 3 parts, because I wanted every feature to be replaceable when it breaks. Parts can be put together with either of the following options: Glue 2x M4…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
A small group of wobble-fidgets for rocking and rolling on a desk. An arc, a double-cone, elliptical spinner, and double oval. Great as simple desk objects or for balancing, spinning, wobbling, and so on.
Weebles Wobble but they don't fall down! Weebles are super fun flickering characters, meet Bluey! How does it work Weebles are toys, balls that return to their initial position , they don't fall! Each object can be unscrewed, you will…
Made this for an Ender 5+. It is based on the Ender 5 design from the remix link, but uses heat set inserts.
* STILL IN BETA * This is an anti-wobble system do reduce or eliminate z wobble or z banding using a compliant mechanism at its center. This mechanism has been tried in two version. One with machined part with an insert at the middle and…
Print the ghost in a white or clear filament for maximum glow‑through, pop the spring assembly together, and enjoy a floating, flickering spirit that looks right at home on any Halloween shelf, candy station, or eerie corner of your…
First off thank you to the ZeroG team for making the Hydra. It works great compared to what the Ender 5 Plus had. ****** THIS BUILD IS FOR STEALTHBURNER. IF YOU ARE USING EVA, YOU WILL NEED DIFFERENT TOP MOUNTS AND LONGER LEAD SCREWS…
A simple z axis test. Design by zaybach (he wouldn't post it so I did xD) Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: 3D Printing Tests
Didn't like the existing fixes, because they either include drilling holes or don't fit to the design. You will need two 500mmx12 mm rods & all screws needed to assemble are 5mm longer. I used carbon rods with raw finish as it has the…
Anti wobble wedge for making your table stable. Just put the wedge into the gap and youre garden table stands stable. Check also my other designs: https://www.printables.com/social/201278-hans/models
This modification allows WS8 implementation to SP-5. For nut, you should use nut adapter. https://github.com/MirageC79/Interfaces-for-WobbleX-integration/blob/main/Voron/Trident/WobbleX_TR8_Adapter%20Body.stl
link: https://s.click.aliexpress.com/e/_DDdeMyP Buy 3 or more. (MirageC affiliate link) What did I modify? 1. Thickened the hydra arms to allow for spots to insert the shafts for WobbleX. 2. Added the WobbleX logo. 3. Removed MGN12C screw…
I loved Dadgrammer's screw remix for porgekins's Steam Deck Belly Stand Adjustable (sooooo much easier to tighten/loosen), but while it significantly cut down the unthreaded part of the screw, there was still about 0.5mm of play, which…
Z-Ring for Anycubic Vyper. I printed in TPU. No more noise and wobble. You don't need the old black rings. Print Settings Printer: Anycubic Vyper Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Saintsmart TPU red…
Oldham coupling suitable to be used with the Hevort wobbleX system for 8mm threaded rods. Use 3mm steel rods cut to length. Also needs four 6x3mm round magnets. v1.1 fixed a small artifact on the underside.
Note: For the X-Max (X-Plus), the same reduction of lead screw induced wobble can be accomplished by removing the bearing at the top of the lead screw And using the stock couples. This applies for 75% of the max print height. For prints…
The Ender 2 Pro spool holder, z-axis anti-wobble, and lightbar can be printed with the Ender 2 Pro. It barely fits but it fits. I will post a pic of the orientation up above in the picture section. I printed mine at 50% infill with PLA+…
When printing a spool winder, I was wondering if I could print the ball bearings as well. I had some 6mm plastic softair BBs lying around anyways. But I did not find any models for a 608 ball bearing using 6mm BBs. So I designed this…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This little articulated caterpillar is here to crawl into your 3D printing lineup! With its flexible, segmented body, it wiggles, bends, and…
A remix, so you dont have to disasable the whole gantry. Additionaly m2.5 threded inserts (3,3mm hole).
When turning the spirograph it often wobbles because you have to hold the filter with one hand and the spirograph with the other hand. So I modified the lower stand accordingly.
Hi, Provided biscuit is from two adapters combined. Magnet holes : 8,1mm dia. / 4mm deep (in case to push magnets from pin side without destroying entire part) Pin Holes : 3mm dia. / 10mm+ deep
Print the parts with thick walls and top/bottom layers (2.4 mm.) Use 40% infill. It needs to be strong. In addition you will need: 2x 688ZZ (or 688-2RS) ball bearings (8x16x5 mm) 4x M4x10 Allen Head screws with washers 4x M4 T-nuts 4x…
Weebles Wobble but they don't fall down! Weebles are super fun flickering characters, meet Bingo! How does it work Weebles are toys, balls that return to their initial position , they don't fall! Each object can be unscrewed, you will…
No one made an adapter for the WobbleX z-wobble management system, and the basic file doesn't fit in its designed orientation. I've modified the screw positions and hacked off a little of the geometry to give it the clearance it needs.…
Print with height 0.1mm Use rouded jewellery screw for joint with line. Add hooks and use for fishing!
If there are problems with Z Wobble when using ballscrews, here is a 100% solution for it. Extremely simple, cheap and space-saving solution. Eliminates 100% of any Z wobble if present, no backlash and easy to swap. Fits Vcore 3.1 Stepper…
I was looking for a good set of extension organizers but found most of them to have too much dead space to be practical. Then I remembered part of gridfinity is it's supposed to be stackable. So I modeled this base level for my 9-piece HF…
This is a quick, fun print perfect for Thanksgiving…and all the loose change in your drawer:) This toy wobbles back and forth thanks to the weight of the coins. I included four Wobble Turkey STL files: one for dimes, pennies, nickels and…
Z Wobble Test Tower for Prusa XL height 355 mm width 40x40 mm thickness 0.6 mm + additional side parts 40 , 45 , 50 degrees of inclination
This upgrade uses wobbleX in the intended way, unlike the version in the WobbleX Git repository and here on Printables. Simple 1:1 swap with the pre-tension nut V-Minion comes with. Note that this is not a miracle wobbly boi and you will…
Print with height 0.1mm Use rouded jewellery screw for joint with line and hooks. Use roundrign for joint hooks, use small hooks. Add hooks and use for fishing!
An Oloid is a curved geometric object which rolls surprisingly well in a wobbling way. Easy 3 part print. Make it heavy use a good amount of infill Stack together (if u want with some glue). Roll it and have fun 😄
Italiano Sistema di gestione Z Wobble della Hevort adattato per Artillery X1. Il sistema si basa su 2 supporti distanziati tra loro da magneti in fase attrattiva e sfere di acciaio per tenerli distanziati ma liberi di oscillare in caso di…
