113 models
This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…
This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…
I use 4 inch DWV PVC pipe to connect my various larger tools to my dust collector in my workshop and needed a bracket to be able to securely mount it to my walls and ceiling. This bracket securely fits around the pipe to hold it in place.…
Habe einen Halter gesucht, um den Fensterreiniger Kärcher WV5 platzsparend und stabil im Putzschrank unterzubringen. Die verfügbaren Halterungen haben mich nicht überzeugt, deshalb habe ich selbst einen Halter konstruiert. Gedruckt mit…
West Virginia, USA (WV) Topographic Relief Map with Rivers and Coastal Waters West Virginia, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
I designed a garden tower that would side on top of my 100mm siphon shroud in an aquaponics system. Complete 3d printed options would take too much filament and time and so I went with modifying a spare 65cm x 100mm (hole) PVC pipe…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army HMMWV unit .…
I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…
The Kärcher WV5 7 WV6 holder at https://www.printables.com/model/109045-wandhalterung-fur-karcher-wv5-fensterreiniger is just for the cleaner itself. But the Plus / Premium version come with an additional spray bottle and a second suction…
Kärcher WV 6 Premium Window Vac Wall Mount for the main unit and narrow nozzle. Category: Household Supplies
A simple hanger for the Karcher Window Vac Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Generic PLA white Category: Household
Just a push fit attachment to give you a narrow aperture on the Sharks odd shaped handheld vacuum range, for getting into smaller area. Also included a particularly long one you can slice down to the size you want. No supports required.
A pair of vices for tuning and waxing. Works great for both snowboards and skis. 3 positions for board placement: horizontal, vertical and 30 degree; Elastic pads for board protection and added grip; Utility surfaces for clamping if…
Cap fitting for 1-1/2" DWV pipe
I have a number of DeWalt tools with dust extractor ports on them. I recently bought their Wet/Dry vac and was extremely disappointed that the provided hose, does not fit any of the DeWalt tools or even the special Twist Lock adapter that…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC HMMWV unit . Three…
This is a vacuum hose adapter for DeWalt airlock systeem. On my DeWalt DWE315KT multitool it replaces the dwv9000-xj adaptor. Maybe it will fit also other DeWalt tools. It is for hose 32 mm. The diameter on the DeWalt adaptor on my…
The non-knurled option prints fastest.
So, the other day I was cheerfully cleaning my shower screen when, without warning, my head fell off!!!! This was, as you can imagine, slightly annoying! But I picked it straight up, and popped it back into place. However, a few seconds…
Ain't got no time for quartz clocks. Get that WWVB goodness. Boblobs 's Modular Clock has a bunch of nice clock faces to choose from and is well thought out - it's just missing space for a better mechanism. Vitamins Remixed for HD-1688…
This is a collection of 2" and 3" PVC DWV fittings I modeled while planning a bathroom reno. Mostly Charlotte Pipe from home depot. Some of the models aren't super pretty, but the hub locations are in the right spot relative to each other…
Printer Settings Supports : Yes
I did not create the original. I don't know who did. all I did was remix it to print without support. Print out of anything you want but remember that UV and Temp resistance for its use case would be important. Printed out of ASA. If you…
Model is designed with a 2.2 mm wall, to fit 5x0.4mm lines. Material: PETG Line Width: 0.4mm Wall Lines: 3 → no infill Flow Rate: 110% on my Snapmaker printer, I needed a little more material, otherwise the walls would separate Print the…
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
This adapter works together with the Dewalt DWV9000 adapter in order to create a locked (but still rotatable!) connection between your Bosch AdvancedVac or UniversalVac vacuum cleaner and all of your Dewalt Airlock-compatible power tools.…
a map/puzzle of West Virginia divided into the individual counties.
I did not create the original. I don't know who did. all I did was remix it to print without support. Print out of anything you want but remember that UV and Temp resistance for its use case would be important. Printed out of ASA. If you…
Yazdırırken ağaç desteği kullanmayınız normal destekle yazdırınız
Adapter that fits the female portion of a 4" sewer and drain Wye fitting to allow connecting a 4" Powertec (or similar) blast gate. Allows using PVC sewer and drain (DWV) for dust collection ducting. Print in PETG, 3 wall loops, and 20%…
Car tunning, tires cup Printed on 0.2 leyer hight infill 100% PLA or PTGE optional----- you can change colors on first leyer
The impeller on my Kircher wv2 broke and i made a new one. Its a 2 part assembly, glue is needed to attach the distance bottom rod to the impeller. I used Loctite to affix the impeller to the motor rod, super glue will probably work too :)
I chose to print in PETG for additional durability and since I would be storing the adapter in my garage. Other than adding a brim for additional stability during printing, I used default settings for my 0.4mm nozzle which worked well for…
HMMWV/Humvee Self Cancelling Turn Signal Arm Pivot for those with Turn signals that are missing the flipper arm pivot. Printed on an LCD Resin printer out of ABS like resin, then used a brass tube brush to slowly ream center pivot hole…
Потерялась часть ручки стеклоподъёмника двери моего WV Passt B3, печатал остатками PET-G, сопло 0,4 заполнение 50% слоя 0,2, ручка с усилием садиться на своё место, но зато не вываливается и работает отлично,
Wandhalter für das Kärcher Fensterreiniger-Set WV5 Premium bestehend aus: Wandhalter für den Kärcher Fenstersauer Wandhalter für die Sprayflasche Wandfalter für die kleine Düse Körbchen für das Netzteil, Anleitung etc.
Makita 5903R Dust Collection Port This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw using a shop vacuum, in combination with the DeWalt DWV900 dust extraction quick connect. It's the…
WVR-6R Wolverine for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • wvr-6r3.stl…
Since there was no wall holder with this Window vacumcleaner, I modified an existing model to fit the Leifheit.
Prints without supports, I used 2 processes so that the Joystick platform would be nice and strong: Joystick platform 70% infill Mounting Arm: 25% infill To mount X56 Joystick and Thruster to these platforms you will need 8* M5x60mm…
This is an 80mm round fan grille/cover with the Yawvr Logo on it. after i modded my yawvr base to retrofit arctic f8 fans to help with cooling, i created these covers for the exit fans on the back of the yawvr base. i did not add any…
added a front panel as it was missing in the original model
This is a center cap for a Formuling steering wheel with a 78mm hole and approximately 5mm plate thickness. It features a 1970 VW logo, which can be printed in a second color if desired. TPU is recommended, otherwise you may not be able…
For a Kärcher WV Classic. Partnumber 6.38.31.03-0 It's a quick and simple part with TPU. Don't forget to activate the partcooler.
End effector for the https://www.printables.com/model/812639-screwiverse-articulated-arm for attaching
YawVR VKB Gladiator NXT mount, print fairly solid, you will need to drill new holes in the rim of the YawVR bowl. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament:…
I wanted to use the accessory of my Kärcher WV1 window cleaner without the cleaning pad in the middle. The adapter screws firmly onto the bottle. The sprayer head screws on top of the adapter. Under normal use, the adapter stays connected…
Eine einfache Wandhalterung für den Fensterabzieher von Kärche Modell WV75.
I use this as a inside pipe screen will need to adhesive in. adjust by %1 scale if off.
plastové držáky na výklopné pevné plato v kufru WV Caddy, už 2 roky funkční. kresleno ve Fusion 360 tisk PET-G
SPINA DI BLOCCAGGIO LEVA APRI COFANO ANTERIORE COMPATIBILE CON AUDI PORSCHE E WV VERSIONE SEMPLIFICATA DA STAMPARE IN PETG RIEMPIMENTO 100% <<<<IN FOTO IL COMPONENTE NERO è QUELLO UGUALE ALL'ORIGINALE>>>> QUESTA VERSIONE è PIù SEMPLICE E…
Made with Copilot Labs Category: 3D Printing Tests
A much sturdier version with holding arms on both sides. Attach with a M8 bolt to the frame piece holding the cockpit. The socket I used is this: http://www.louis.de/index.php?topic=artnr_gr&artnr_gr=10032936 Category: Automotive
Remote Control Housing for the Beninca TO.GO-WV Version 2; I simplified and cleaned up the model a little. Printed using Neon green and matte black PLA, 0.2mm layer height and 20% infill. Version 1; Printed using transparent PLA, 0.2mm…
Dunbar WV Middle School Thor Hammer. Remix changes to add more weight, easier printing on smaller printers, and just little cleanups here and there.
Added a clip to hold the charger plug when the window cleaner is not in the bracket.
I made a floor waste grate for my bathroom/shower. I didn't want a large recessed panel for the grille, and as I polished the floor by hand there wasn't a good way to have a inset plate that was level with the surrounding floor. Photos…
An adapter from a 2x3" rectangular downspout to a 3" DWV/S&D (Sewer and drain) pipe. This being the USA, a "2x3" downspout is 2.25" by 3.25" and a 3" S&D pipe is really 3.25" in diameter. Includes FreeCAD model, .stl file and .3mf file…
Angled VKB Gladiator NXT mount for Yaw VR, designed to be glued to a Peripheral Mount Base https://www.thingiverse.com/thing:4601501 Print with top of mount down, reccommend 70% fill for mount plate, 20% fill for the rest. Category: Video…
This is a multi position adjuster for the center stand wheel/yoke holder on the yawvr motion simulator. It will lock the stand in position stopping it from hinging back & forth making it much more solid than the default solution which has…
Print the letters, silhouette, dome and base separate for best results. No support required. Base includes points for letter placement. I made the dome separate so it can be printed a different color, which should be copper!
orjinal olandispratöre uygun değildir ve ısı dayanımı için pc filament ile basılmalıdır
Schlauchhalter Hinterrad für Kettenöler, work in progress
" Cambered Beetle Perspective " is a 3D-printed wall art piece that brings a twist of humor and vintage vibes to any space! Featuring the iconic VW Beetle with a cambered stance and a cheeky "Why So Negative?" message, this design is…
A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…
Encoder-Based Wind Vane This wind vane achieves a directional resolution of 22.5° using optical encoder disks . The optical sensors (fork-type couplers) are reclaimed from discarded or defective inkjet printers. The primary objective of…
Full instructions at https://youtu.be/neCHO7eWlt8 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Video Games
Kinda disappointed that they only have a couple of their bridges. I do a LOT of zero projects, so I made my own. I'm just going to leave a PiZ2 on there to set up all my Zeros. (that way I can do a 64 or 32bit OS. And 64bit really isn't…
The central holder on the YawVR is prone to forward and backward movement when used with a racing wheel, this brace makes it extremely solid. Category: Video Games
This is to ease the process of designing mounts for peripherals, enjoy Note that the bottom of this part is actually the top of the rim. Category: Video Games
Made with Copilot Labs Category: 3D Printing Tests
2020-10-03: Updated with better holding capability and screw hole for locking in place. You can use this STL to create peripheral mounts that have a friction fit and can slide the rim of the YawVR dome. It is my intention that you could…
Made with Copilot Labs Category: 3D Printing Tests
Been looking for an Isolator that could be used with extra wire for adding or removing length for tuning. Added extra holes for that and for added strain relief. Made the hole at the top large enough for a S clip for hanging.
Bracket to store all the bits for the WV2. Designed in 3 parts for easy printing and assembly. Includes a couple of washers if using countersink 8g screws. I've used 3M command strips to attach it in the end. Supports - could probably get…
This bushing allows the insertion of the 1-1/2 pipe into the 4" pipe. The connection is intentionally not glued so that if the 4" in-ground pipe shifts or freezes, the drain waste pipe connection can move up or down. I needed to connect a…
Sugest printing with ASA, or ABS for UV resistance.
Afin de remplacer le bracelet en caoutchouc de cette montre, qui s'est cassé en deux , voici un remplaçant tout en TPU. Le premier anneau vient se positionner dans le petit bracelet avant le remontage. L'entrecorne est de 20mm max donc…
Threshold and floor caps. Created on the basis of the original cap, but without an indentation due to the orientation of the print. Printed from TPU
This is a bust of the iconic character of WVRPS with the trait “DJ Dragoon”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
This is a bust of the iconic character of WVRPS with the trait “Gnar Heart”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
I designed this custom wall holder for the Kärcher WVP 10 ADV liquid vacuum cleaner. I absolutely love this device—not only does it work great for cleaning windows, but it’s also fantastic for wiping down various surfaces like kitchen…
I designed this wall-mountable holder for the Kärcher WVP10 Advanced water container because I couldn’t find any proper storage solution that allows the tank to dry completely after cleaning. After finishing a job, I like to store the…
This is Part 6 and the final addition to my complete storage system for the Kärcher WVP10 Advanced . To finish the series, I designed a simple and practical wall holder for the water funnel . Design Overview The holder consists of two…
This is Part 3 of my custom accessory series for the Kärcher WVP10 Advanced . After designing a holder for the device and the upside-down drying container, this time I created a dual wiper holder to keep both wipers neatly organized and…
fixing the holder of the original WV car hanger
Charger stand AIRVOOC 50w OAWV08 1+ edition. I tried to use less filament while ensuring the 1+ logo remains in our hearts ♥. It is better to print the rounded holder at a low speed. I used PETG.
Redesigned the bottom cap of the Explorer POTA 20 Mast (ZXP-POTA-20). I made the bottom thicker for added support of the threaded insert and printed this project after about 12 or so trial and error attempts with PETG (color of your…
This is a bust of the iconic character of WVRPS with the trait “DJ Dragoon”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
This is a bust of the iconic character of WVRPS with the trait “Nayomi”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial – ShareAlike…
This is a bust of the iconic character of WVRPS with the trait “Gnar Heart”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
Printed with PLA at 15% infill. When importing, select import as separate parts If you do not have an MMU, reference the instructions here to print each component in a different color.
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
I have a lot of Dewalt tools and they all have a standard attachment compatible with DWV9000 quick connect vacuum adapter. Couldn't find one that attached to the domino so I designed one.
