Liczymy pasujące modele…
This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…
Wydruk około 4,85 €–5,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use 4 inch DWV PVC pipe to connect my various larger tools to my dust collector in my workshop and needed a bracket to be able to securely mount it to my walls and ceiling. This bracket securely fits around the pipe to hold it in place.…
Wydruk około 2,55 €–3,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
Printer Settings Supports : Yes
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bushing allows the insertion of the 1-1/2 pipe into the 4" pipe. The connection is intentionally not glued so that if the 4" in-ground pipe shifts or freezes, the drain waste pipe connection can move up or down. I needed to connect a…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…
West Virginia, USA (WV) Topographic Relief Map with Rivers and Coastal Waters West Virginia, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army HMMWV unit .…
A simple hanger for the Karcher Window Vac Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Generic PLA white Category: Household
Cap fitting for 1-1/2" DWV pipe
I have a number of DeWalt tools with dust extractor ports on them. I recently bought their Wet/Dry vac and was extremely disappointed that the provided hose, does not fit any of the DeWalt tools or even the special Twist Lock adapter that…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC HMMWV unit . Three…
The non-knurled option prints fastest.
So, the other day I was cheerfully cleaning my shower screen when, without warning, my head fell off!!!! This was, as you can imagine, slightly annoying! But I picked it straight up, and popped it back into place. However, a few seconds…
Model is designed with a 2.2 mm wall, to fit 5x0.4mm lines. Material: PETG Line Width: 0.4mm Wall Lines: 3 → no infill Flow Rate: 110% on my Snapmaker printer, I needed a little more material, otherwise the walls would separate Print the…
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
Adapter that fits the female portion of a 4" sewer and drain Wye fitting to allow connecting a 4" Powertec (or similar) blast gate. Allows using PVC sewer and drain (DWV) for dust collection ducting. Print in PETG, 3 wall loops, and 20%…
The impeller on my Kircher wv2 broke and i made a new one. Its a 2 part assembly, glue is needed to attach the distance bottom rod to the impeller. I used Loctite to affix the impeller to the motor rod, super glue will probably work too :)
HMMWV/Humvee Self Cancelling Turn Signal Arm Pivot for those with Turn signals that are missing the flipper arm pivot. Printed on an LCD Resin printer out of ABS like resin, then used a brass tube brush to slowly ream center pivot hole…
This is a center cap for a Formuling steering wheel with a 78mm hole and approximately 5mm plate thickness. It features a 1970 VW logo, which can be printed in a second color if desired. TPU is recommended, otherwise you may not be able…
For a Kärcher WV Classic. Partnumber 6.38.31.03-0 It's a quick and simple part with TPU. Don't forget to activate the partcooler.
YawVR VKB Gladiator NXT mount, print fairly solid, you will need to drill new holes in the rim of the YawVR bowl. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament:…
Made with Copilot Labs Category: 3D Printing Tests
A much sturdier version with holding arms on both sides. Attach with a M8 bolt to the frame piece holding the cockpit. The socket I used is this: http://www.louis.de/index.php?topic=artnr_gr&artnr_gr=10032936 Category: Automotive
Dunbar WV Middle School Thor Hammer. Remix changes to add more weight, easier printing on smaller printers, and just little cleanups here and there.
I made a floor waste grate for my bathroom/shower. I didn't want a large recessed panel for the grille, and as I polished the floor by hand there wasn't a good way to have a inset plate that was level with the surrounding floor. Photos…
Made with Copilot Labs Category: 3D Printing Tests
Made with Copilot Labs Category: 3D Printing Tests
Bracket to store all the bits for the WV2. Designed in 3 parts for easy printing and assembly. Includes a couple of washers if using countersink 8g screws. I've used 3M command strips to attach it in the end. Supports - could probably get…
Afin de remplacer le bracelet en caoutchouc de cette montre, qui s'est cassé en deux , voici un remplaçant tout en TPU. Le premier anneau vient se positionner dans le petit bracelet avant le remontage. L'entrecorne est de 20mm max donc…
This is a bust of the iconic character of WVRPS with the trait “DJ Dragoon”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
This is a bust of the iconic character of WVRPS with the trait “Gnar Heart”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
Redesigned the bottom cap of the Explorer POTA 20 Mast (ZXP-POTA-20). I made the bottom thicker for added support of the threaded insert and printed this project after about 12 or so trial and error attempts with PETG (color of your…
This is a bust of the iconic character of WVRPS with the trait “DJ Dragoon”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
This is a bust of the iconic character of WVRPS with the trait “Nayomi”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial – ShareAlike…
This is a bust of the iconic character of WVRPS with the trait “Gnar Heart”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial –…
Printed with PLA at 15% infill. When importing, select import as separate parts If you do not have an MMU, reference the instructions here to print each component in a different color.
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
This is a multi position adjuster for the center stand wheel/yoke holder on the yawvr motion simulator. It will lock the stand in position stopping it from hinging back & forth making it much more solid than the default solution which has…
This is an 80mm round fan grille/cover with the Yawvr Logo on it. after i modded my yawvr base to retrofit arctic f8 fans to help with cooling, i created these covers for the exit fans on the back of the yawvr base. i did not add any…
" Cambered Beetle Perspective " is a 3D-printed wall art piece that brings a twist of humor and vintage vibes to any space! Featuring the iconic VW Beetle with a cambered stance and a cheeky "Why So Negative?" message, this design is…
Habe einen Halter gesucht, um den Fensterreiniger Kärcher WV5 platzsparend und stabil im Putzschrank unterzubringen. Die verfügbaren Halterungen haben mich nicht überzeugt, deshalb habe ich selbst einen Halter konstruiert. Gedruckt mit…
I have a lot of Dewalt tools and they all have a standard attachment compatible with DWV9000 quick connect vacuum adapter. Couldn't find one that attached to the domino so I designed one.
Makita 5903R Dust Collection Port This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw using a shop vacuum, in combination with the DeWalt DWV900 dust extraction quick connect. It's the…
SPINA DI BLOCCAGGIO LEVA APRI COFANO ANTERIORE COMPATIBILE CON AUDI PORSCHE E WV VERSIONE SEMPLIFICATA DA STAMPARE IN PETG RIEMPIMENTO 100% <<<<IN FOTO IL COMPONENTE NERO è QUELLO UGUALE ALL'ORIGINALE>>>> QUESTA VERSIONE è PIù SEMPLICE E…
This adapter converts 4" Drain/Waste/Vent PVC pipe sleeve to 4" flexible dust collection hose . Initially I had used this model but my pipe end was a sleeve end, and it seemed silly to cut a 40mm piece of pipe to pad out the sleeve, so I…
Added a clip to hold the charger plug when the window cleaner is not in the bracket.
Kinda disappointed that they only have a couple of their bridges. I do a LOT of zero projects, so I made my own. I'm just going to leave a PiZ2 on there to set up all my Zeros. (that way I can do a 64 or 32bit OS. And 64bit really isn't…
This is a vacuum hose adapter for DeWalt airlock systeem. On my DeWalt DWE315KT multitool it replaces the dwv9000-xj adaptor. Maybe it will fit also other DeWalt tools. It is for hose 32 mm. The diameter on the DeWalt adaptor on my…
Потерялась часть ручки стеклоподъёмника двери моего WV Passt B3, печатал остатками PET-G, сопло 0,4 заполнение 50% слоя 0,2, ручка с усилием садиться на своё место, но зато не вываливается и работает отлично,
Threshold and floor caps. Created on the basis of the original cap, but without an indentation due to the orientation of the print. Printed from TPU
This is a bust of the iconic character of WVRPS with the trait “Nayomi”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial – ShareAlike…
This adapter works together with the Dewalt DWV9000 adapter in order to create a locked (but still rotatable!) connection between your Bosch AdvancedVac or UniversalVac vacuum cleaner and all of your Dewalt Airlock-compatible power tools.…
I use this as a inside pipe screen will need to adhesive in. adjust by %1 scale if off.
I designed this custom wall holder for the Kärcher WVP 10 ADV liquid vacuum cleaner. I absolutely love this device—not only does it work great for cleaning windows, but it’s also fantastic for wiping down various surfaces like kitchen…
I designed this wall-mountable holder for the Kärcher WVP10 Advanced water container because I couldn’t find any proper storage solution that allows the tank to dry completely after cleaning. After finishing a job, I like to store the…
This is Part 3 of my custom accessory series for the Kärcher WVP10 Advanced . After designing a holder for the device and the upside-down drying container, this time I created a dual wiper holder to keep both wipers neatly organized and…
This is Part 4 of my custom storage system for the Kärcher WVP10 Advanced . After creating holders for the device, the water container, and the wipers, this part focuses on the head — the component that connects the wiper to the handle.…
This is Part 5 of my custom storage system for the Kärcher WVP10 Advanced**, completing another essential piece of the full setup. Design Purpose This time, I focused on creating a dedicated battery holder — and this might be my favorite…
This is Part 6 and the final addition to my complete storage system for the Kärcher WVP10 Advanced . To finish the series, I designed a simple and practical wall holder for the water funnel . Design Overview The holder consists of two…
This is a collection of 2" and 3" PVC DWV fittings I modeled while planning a bathroom reno. Mostly Charlotte Pipe from home depot. Some of the models aren't super pretty, but the hub locations are in the right spot relative to each other…
The default brush on the Shark Deluxe WandVac 2.0 is poor, so this adapter will let you fit a "standard" 32mm inner brush head. My make photo was a v1 to get the dimensions correct for the tolerances of my printer, so your milage may…
A pair of vices for tuning and waxing. Works great for both snowboards and skis. 3 positions for board placement: horizontal, vertical and 30 degree; Elastic pads for board protection and added grip; Utility surfaces for clamping if…
Printed with PLA at 15% infill. When importing, select import as separate parts If you do not have an MMU, reference the instructions here to print each component in a different color.
An adapter from a 2x3" rectangular downspout to a 3" DWV/S&D (Sewer and drain) pipe. This being the USA, a "2x3" downspout is 2.25" by 3.25" and a 3" S&D pipe is really 3.25" in diameter. Includes FreeCAD model, .stl file and .3mf file…
Encoder-Based Wind Vane This wind vane achieves a directional resolution of 22.5° using optical encoder disks . The optical sensors (fork-type couplers) are reclaimed from discarded or defective inkjet printers. The primary objective of…
Wandhalter für das Kärcher Fensterreiniger-Set WV5 Premium bestehend aus: Wandhalter für den Kärcher Fenstersauer Wandhalter für die Sprayflasche Wandfalter für die kleine Düse Körbchen für das Netzteil, Anleitung etc.
An adapter that converts your existing smart watch into a heads up display and mounts to a helmet. Patent pending. Open model from snowvi.com for personal use only. It has a GoPro-style mounting finger that can be attached to a helmet…
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
An adapter that converts your existing smart watch into a heads up display and mounts to a snow goggle. Patent pending. Open model from snowvi.com for personal use only. It has a mount plate that clips to your goggle’s strap, which the…
Sugest printing with ASA, or ABS for UV resistance.
I chose to print in PETG for additional durability and since I would be storing the adapter in my garage. Other than adding a brim for additional stability during printing, I used default settings for my 0.4mm nozzle which worked well for…
This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…
Remote Control Housing for the Beninca TO.GO-WV Version 2; I simplified and cleaned up the model a little. Printed using Neon green and matte black PLA, 0.2mm layer height and 20% infill. Version 1; Printed using transparent PLA, 0.2mm…
Print the letters, silhouette, dome and base separate for best results. No support required. Base includes points for letter placement. I made the dome separate so it can be printed a different color, which should be copper!
My WVC-600 came without the cable I ordered but I didn't want to wait so I made one. I used 3mm steel dowel pins I had laying around and soldered on a 3x1.5mm² power cable and insulated with heat shrink. yellow tape for additional…
The Kärcher WV5 7 WV6 holder at https://www.printables.com/model/109045-wandhalterung-fur-karcher-wv5-fensterreiniger is just for the cleaner itself. But the Plus / Premium version come with an additional spray bottle and a second suction…
plastové držáky na výklopné pevné plato v kufru WV Caddy, už 2 roky funkční. kresleno ve Fusion 360 tisk PET-G
Just a push fit attachment to give you a narrow aperture on the Sharks odd shaped handheld vacuum range, for getting into smaller area. Also included a particularly long one you can slice down to the size you want. No supports required.
NOTE: This part is superseded by an updated adapter that prints as a single piece . I do not recommend you use this one for future needs. It works fine, but it's a pain to epoxy together. Two part adapter to convert DWV PVC Pipe to 4"…
Since there was no wall holder with this Window vacumcleaner, I modified an existing model to fit the Leifheit.
Full instructions at https://youtu.be/neCHO7eWlt8 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Video Games
Angled VKB Gladiator NXT mount for Yaw VR, designed to be glued to a Peripheral Mount Base https://www.thingiverse.com/thing:4601501 Print with top of mount down, reccommend 70% fill for mount plate, 20% fill for the rest. Category: Video…
Prints without supports, I used 2 processes so that the Joystick platform would be nice and strong: Joystick platform 70% infill Mounting Arm: 25% infill To mount X56 Joystick and Thruster to these platforms you will need 8* M5x60mm…
The central holder on the YawVR is prone to forward and backward movement when used with a racing wheel, this brace makes it extremely solid. Category: Video Games
2020-10-03: Updated with better holding capability and screw hole for locking in place. You can use this STL to create peripheral mounts that have a friction fit and can slide the rim of the YawVR dome. It is my intention that you could…
This is to ease the process of designing mounts for peripherals, enjoy Note that the bottom of this part is actually the top of the rim. Category: Video Games
I designed a garden tower that would side on top of my 100mm siphon shroud in an aquaponics system. Complete 3d printed options would take too much filament and time and so I went with modifying a spare 65cm x 100mm (hole) PVC pipe…
a map/puzzle of West Virginia divided into the individual counties.
Car tunning, tires cup Printed on 0.2 leyer hight infill 100% PLA or PTGE optional----- you can change colors on first leyer
I had to do several prints until the stability was usable. Take *.3mf-file to find the position. Printer Settings Supports : Yes Brim: Yes
orjinal olandispratöre uygun değildir ve ısı dayanımı için pc filament ile basılmalıdır
I wanted to use the accessory of my Kärcher WV1 window cleaner without the cleaning pad in the middle. The adapter screws firmly onto the bottle. The sprayer head screws on top of the adapter. Under normal use, the adapter stays connected…
