366 models
Case for a set of 7 Hexdrivers. There seem zo be quite a lot of very similar versions of these hexdrivers out there. Case has a snug fit lid and drivers can be easily removed by pushing the tips down into the case.
FIXDRY filament dryer box extension for 8 cm spools - V2. Rozšíření FIXDRY sušičky filamentu pro cívky šířky 8 cm - V2.
A case for Anton: an Air Quality monitor which writes to InfluxDB. Note: while neat and useful, this is not a finished product by any stretch, and is for hobbyists. Print instructions Note: Photos are out of date; I'll be updating them…
Zusammen mit dem Designer @MeisterEdel habe ich dieses Testmodel mit meinem Logo entwickelt. Es testet euren 3D Drucker in Bezug auf Toleranz (inkl. Gewinde), Bridging, Maßhaltigkeit, Wandqualität und Oberflächenqualität. Es gibt zwei…
UPDATE: U can now make remixes!! (plz dont just resize the model or add runners) please leave a review if you like this model and let me know if what you would like me to make next PRINT SETTINGS: ARMOR: Supports: no material: any infil:…
Print upside down and flat with 100% infill.
based on my PR to keycap_playground https://github.com/riskable/keycap_playground/pull/7 includes a bit of everything XDA, but nowhere near what keycap_playground is capable of for best feel, use PETG and sand down the top i've not found…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
Finally, I can print decent keycaps on an FDM machine. And with a 0.2mm nozzle, you can as well!! This model is designed and optimized to be printed using a 0.2mm nozzle. I haven't tested with other nozzle sizes. I bought a 0.2mm…
Two different versions of XDA keycaps, modeled with FDM printing in mind. They are compatible with Cherry MX switches. Since we couldn't find any official documentation of the XDA profile, we made two different versions of the model,…
Many of the models I have found are thin, giving them a higher pitch tone. These are designed with a thicker border, making them more “Thocky” than your average 3d printed keycap. The main feature is that it is easy to print and has a…
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
silicagel remain dry when the dehydrator is on and keep dry the filament spool when the timer is off. I never reminder wich temparature and time used for different filament for this reason I include the requirement fromt the manufacturer…
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
XDA Keycaps for Dust-Proof Stems (Remix) This is a 3D printable keycap set in the XDA profile, specifically designed for keyboards with dust-proof stems. Key Features: Compatible with dust-proof stems Based on the XDA profile for uniform…
Sleeve for extended XD9 magazines. Designed to fit AWCY?'s XD9. Tab'd version has a removal tab on the back to help with printing the sloped edge.
I find it really stupid that Shure offers different color rings or caps for all its microphones except for the SLXD2. That's why I remodeled it. So please give me a like on the model and follow me as a thank you. After all, I'm giving it…
A table top mic stand to keep your wireless microphones from rolling away. Designed to fit the Shure ULXD2/SM58 but likely still useful for microphones of a similar shape. I made this stand so we could have microphones on all of the…
The Lower shield was printed in red ABS with the added design support to prevent warpage. The Tag base was printed with red filament and the letters in silver. Shield was printed upside down as shown. Then it was heated with a Heat Gun…
3cm Rias Gremory model from highschool DxD quick 30min print Feel free to upscale for larger model 0.16mm layer height 15%% infill Use supports for hair
please use the supports as provided
This is a clip to replace the Shure 95A29359 when you loose it. It is not a 1:1 copy, it is wider to be more obvious and fit the foam tape you can buy in the store. This does not fit the stow compartment and depending on what method and…
This is a simple display stand I created for the Springfield XD 40 S&W Pistol. I designed this for color switch printing using Prusa Slicer. You can place color switches at the following values in Prusa Slicer to achieve the results you…
I made this for myself some time ago but I figured people would be happy to print them for themselfs as well. Is has holes for magnets in case you want to add them.
A mount to use your iOS 16 (Beta) MagSafe equipped iPhone as a Continuity Camera to replace your Apple XDR Display. Note this model has not been tested but is based on submitted measurements:…
A small but hard test cube for multicolor prints! I created this cube for a video on the YouTube channel mpoxDE to test the Prusa XL. The cube contains some steep overhangs and areas that are difficult to print with the secondary color…
I added the icons in OrcaSlicer and because of this I can only export this as a 3MF file that is compatible with Bambu Studio/OrcaSlicer. I'm sorry :( --------------------- I uploaded profiles for a single blank keycap and all icon…
I created this since didn't like the grips on the side of the other models. Its basic and it works, i have uploaded the model with out the XD logo and with the XD logo. I made this to go with my new XD mod 2. Print Settings Printer Brand:…
Keycap with XDA profile. Suitable for any switches with Cherry MX type mount: Cherry MX, Gateron, Outemu etc. Designed to be printed with nozzle of 0.4mm or less. Square switch mount mechanism for better durability and possibility of…
KOA (XDA-ish) Profile Keyboard Keycap for Cherry MX stem Switches. The shape is based on the KOA profile from KBDiy brand keycaps. Keycap is customizable further for many different options using just slicer settings. Very sandable and…
I made this keycap for the thumb keys on my Atreus. I recommend printing with a 0.25 or 0.2 nozzle and layer height of 0.1. When printing with a 0.4 nozzle you may run into issues with the thin parts of the stem, make sure to have arachne…
This is a bit holder that fits the newer style Makita base, with an angled design (used to be slightly curved). Holds 3 or 5 standard ¼" hex bits securely with 5x2mm magnets. Please read the following guide before printig. German version…
I needed a means of identifying my microphones that would be subtile, yet still easily recognizable. I took a look at the SLXD2 mic and saw this space specifically between the SM58 grill and the microphone body. It had an unusual shape…
Well, how could you pass by this anime
Example For a dome with a diameter of 90 cm (as in the cover picture; banana for scale), you benefit from essentially only two strut lengths (92,5 and 81 mm), and you can also use standard 20 cm bamboo sticks ( reference ) with minimal…
I bought this "MaxDuino" board on eBay. It emulates a tape player for retro-computing. As I intend to use the board for my Acorn machines, it was modified to support Motor Control via the 3.5mm stereo plug. Design I used Fusion 360 to…
Well, how could you pass by this anime
Cosmetics basket 90x190x130/ 130x200x100 ŠxDxV (DxLxH) No support
The OWON benchtop meters XDM1041 and XDM1241 are both nice units for benchtop work but could use some gridfinity lovin' so here we are. This model should fit the meter tightly such that it won't just lift out of place. To insert, start…
This is CAD dummy modell of a DC Motor often labelled XD-3420. It comes in 12V and 24V versions, and is rated at 30 W and ca 2.5 A (yes, for both voltages. -- so probably the Wattage is only correct for the 12V version) Body Diameter: 51…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
Build your perfect storage setup with this Modular Stackable Storage System . Designed to be completely customizable, you can stack them, arrange them side-by-side, or use them individually to organize your desk, workbench, or hobby…
Airbrush HexDesign Stand adapted to fit more airbrushes including those with air valves
I print out of the Fixdry and this some times with 2 printers at the same time. I was tired of the annoying filament fumble through the lid... Now a filament change is so mutch easyer. You can us the stock rubber
Well, how could you pass by this anime
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
Case for TZXDuino sold by MyRetroStore. This case is designed specifically for the TZXDuino unit sold by MyRetroStore: Website: https://myretrostore.co.uk eBay store https://www.ebay.co.uk/str/myretrostoreuk I have no connection to…
This is an adapter for mounting an optical sight on an airsoft gun from Tokyo Marui. Similar adapters are available on the market for Glock, etc., but the size did not fit my XDM-40, so I made this adapter. - - - UPDATE! - - - - - - - - -…
My dryer FIXDRY is available from different brandnames, but I am convinced they all originate from one same factory. I do not use it permanently, so I need some variation for storage, exchange filament and flexibility for PTFE tube…
Over time I received some requests for providing a version of my well-received airbrush stand that supports some kind of clamping or mounting mechanism. With this remix, I am providing you with a solution that enables you to create…
Well, how could you pass by this anime
Extended Magazine Grip Blocks for Springfield XD 9/40 These were developed from scratch in Fusion 360 for use with Springfield XD, XD Mod 2, and printed variants. They are direct replacements for the OEM magazine base and install the same…
Approximate Model of the Raxda Sata Penta Hat I used for designing my NAS Case. My main goal was having a rough estimate of where the connectors will be. They should be precisely placed within 0.5mm.
If your Cables run to the right side, mirror the “Kabel Seite” Part.
Keyboard keycaps storage for gridfinity. Perfect height for XDA Keycaps to stack them on top of each other.
I redrew the entire assembly in Fusion360. This allowed me to thin the parts out as well to save some filament since the original parts are plenty thick. By redrawing it, the unused closed off holes in the remix are gone too. For the 2…
Continuing organizing my tools and spares in tool boxes now a relatively small universal tool box in gridfinity style. Now I also added a lid with Bambu Lab logo to cover the 2x2 boxes. Easy to stack on other 2x2 gridfinity boxes. The bin…
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for R/C car 12mm hex
This connector replaces the existing adapter, to connect tightly to a 27mm cleantec festool hose.
What's up everyone! I like having all my guns on these stands, and being able to keep the mags with them is nice. I couldn't find a design specifically for some of the models I have, and so I decided to design them. Wanted them to be a…
The OWON XDM1241, being a budget bench multimeter, is quite a neat little unit for the hobbyist. Its small form factor certainly is a plus if you don't have a lot of bench space available. The downside of it being such a compact and light…
The hex-holes have a distance (center-to-center) of 32mm. Apex Evo Update(2023-01-05): I uploaded a new version of this design which has 30 degrees turned hex holes. (Especially for Mark and of course everyone else whose stand offs are…
Don't apply too much pressure when inserting, or they will deform. Print as oriented with Tree supports, more walls will strengthen the overall structure. Also fits the EBB36, although not quite as prettily.
Frame trim for Dual electronics xdvd269bt double din stereo and 2001-2005 Honda Civic. It's not perfectly match the surrounding diagonal lines, but at least no more see-through gap between the stereo and dash. Let me know if you are able…
-No supports needed. Please give it a like. Thank you
Gridfinity Makerfire Hex-Driver Holder 4x5 Included is Fusion360 File if you want to edit it. Please check out my other models, lots more Gridfinity things coming over the next few weeks. Category: Tool Holders & Boxes
Halterung für die Corsair XD5 Pumpe im Lian Li PC-O11DX Dynamic Midi-Tower In 2 verschiedenen Größen h=60mm und h=93mm Lochabstand für Befestigung im Gehäuse 80mm x 80mm Bracket for the Corsair XD5 pump in the Lian Li PC-O11DX Dynamic…
Replacement rack ears for the Shure dual channel microphone receiver. Designed to be printed with the front plate at the print bed and without supports. Even with basic perimeter settings, appears to be sturdy enough when printed with…
For a better version of this model check: https://www.prusaprinters.org/prints/37426-prusament-plumbus-organizer-everyone-knows-what-it A Plumbus is an all-purpose home device. Everyone knows what it does, so there is no reason to explain…
For the Springfield Armory .40 magazine baseplate adapter for MantisX training system. Added standard baseplate as well. Edit: Added thin version Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
I designed these legs when I realized that the filament tube that comes with the K1 Max would not reach the output port of the fixed dry filament dryer. These legs raise this particular dryer 5 1/4 inches. The legs are very strong but…
Public domain model of a Korg Minilogue XD by Aura Moon . Originally uploaded to Blend Swap .
Hello Fellow Creators FIXDRY double dryerbox is fine. Using it I have found a couple elements missing I designed for usability and my comfort. Feel free to refer to those ideas, I hope you find them useful. Handle : this is the weakest…
Springfield offers a 7-round magazine for their .45 ACP XD-S original model , but not (yet?) for the newer XD-S Mod.2. The “Mod.1” magazine will not fit into a Mod.2 receptacle due to interference with the plastic grip extension. However,…
Getting my tools and spares set up in tool boxes I started with a "gridfinity home" for the three nozzles 0.2, 0.4, 0.6. There is an existing gridfinity solution, but bin 2x3 and four nozzles which is too much for me, I stick with 0.2,…
One remix for my "secret spool organizer" "Only the heat of a Prusa printer can reveal this script when printed in spiral vase mode" XD "one spool to rule them, one spool to wind them, one brand to print them" Print instructions Print in…
This project includes a 3D-printable church for your gaming terrain needs! Whether your characters are just passing by or are heading into a dungeon, this beautifully sculpted church will bring life to any town in your world! Pop the roof…
I 3d Scanned the 2.5-inch drive blank to get the locking part, cleaned it up, and remixed https://www.thingiverse.com/thing:4866109 for the SDD drive caddy. I merged them together and got this as the final product. It slides right into…
Model of the housing for the OWON XDM1041 Digitial Multimeter and DGE2070 Arbitrary Waveform Generator. Useful for mocking up attachments or modifications for your devices. Files included: .stl, .step, .obj, .skp
I recently purchased the OWON DGE2070 Arbitrary Waveform Generator and the OWON XDM1041 Digital Multimeter. I wasn't sure where I was going to put them as my workbench is very small. After moving a few things around, I decided that, if I…
A buddy of mine just bought a Titan and the cupholders aren't large enough for his Stanley and his wife's Yeti water bottles. So I 3d scanned it and then used that as the template to make this. With a little measuring we made both the…
Introducing a 3D-printable desiccant box, a perfect companion for your FIXDRY filament dryer. Designed with precision and functionality, this optional accessory docks seamlessly into the FIXDRY via the rubber gaskets on the dryer’s lid.…
This is an antiroll cage suited for the Shure GLXD2 wireless handset. With my printer the part slid up snugly right above the switch and sits there secure without any further fixation. Dependent on you printer/Slicer setup your result…
I recommend orienting the model according to the picture from Prusaslicer. Organic supports 4 parameters Brim Material: ABS/ABS+/Nylon (high temperatures around the plate)
Modified the mount from Thingiverse so it can be attached to a Skadis board using the T-Clip system by @LineArcLine (using the negative hole by capze ). It is designed to you use a right angle power cable (see picture). You will need to…
The new MaxDuino V2 board has a separate Remote control jack and a Reset switch. Updated my original design with additional cutouts to fit the MaxDuino V2 board. The MaxDuino V1 board has the exact same size, so that board will also fit…
I wanted to share a work in progress. This is just the first test to see if a design like this would work. It's inspired by a psion 5 I had back in the day. It's way oversized right now due to being designed as a universal case. The…
Rings for the beadlocks can be found here https://www.printables.com/model/744137-bead-lock-ring-for-axial-scx10 https://www.printables.com/model/744136-axial-scx10-bead-lock-spyder-lock-19 1.9 Beadlock wheel for 12mm hex R/C vehicle.
Dock to hold and XDm with a PL-MINI 2 light and charge it. Print the chamfered version and add supports, or print the square version without supports. Chamfer was added for drawer clearance and is what is shown in my images. Category:…
I originally started selling these in 2022, but decided to release the files for free. PowerFlex blatantly copied my design in 2024, so now there is very low demand. So, as a gesture to PowerFlex (perhaps a gesture involving a certain…
Abschluss-Kappen d43xD45 -14-4
Always found it annoying that I had to lift the entire lid off of the filament dryer. So I decided to fix that and I created a simple hinge and handle to make filament changes so much easier. The hinge will work on either the front or the…
Just unscrew the grille from the top of the mic, set this ring in, and screw it back in for a tight fit in whatever color you choose. I used PETG with a brim to keep it from letting go of my print plate.
Pick it up, give it a quick spin, place it back on the table, and watch it stop. The two hex dice settle on random sides, clearly showing your numbers. All the fun of rolling dice — without them flying away or getting lost under the sofa.…
The original "ring" on the mic of my FTM-400 XDE was not really useful for hanging the mic anywhere - so I made a new one. I should work with other Yaesu microphones as well, let me know if you made it work with your transceiver!
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
These are parts I've designed/remixed to create the ApexDC "Long Boi" 7inch. This mount allows space on the top plate for a larger, Long-Range friendly, battery. Recommendations: Use Priline TPU Filament as it is stiffer than brands like…
Since there was some confusion on other models like this: I used measures taken from my Fixdry dryer, bought in March 2024. Offers three variants with different hole sizes; plus a two-part you can screw together. How does this improve…
TrexD MOD - Módulo para extrusión directa Ender 5 Plus (BMG/V6/Volcano) Ventajas: Respeta las medidas del módulo original No hay que desplazar el BLTouch No hay que modificar dimensiones de la superficie de impresión Fácil de imprimir…
