Search results: xtreme

Small Whistle: extremely loud

Small whistle for keychain, backpacks and other daily or safety equipment.

Tiny Whistle - Extremely Loud

Introducing the smallest and most powerful whistle! Print it out and annoy your friends and neighbors!

Mini Whistle – Extremely Loud (115dB) – 1.5g Edition

This Mini Whistle – Extremely Loud (115dB) – 1.5g Edition is a slightly larger, sturdier version of the original mini whistle, still small enough to disappear on a keyring. Weighing in at 1.5 grams , it prints quickly and comes off the…

Extremely loud and compact emergency whistle

Rock-Solid and lightweight emergency whistle. Two chamber design. Painful loud. Print Settings Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: Print on its side (as it is in the stl-file) without…

Fabric 20 Graphene - Extreme Flexibility - 7 Models

BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…

Extreme test print , printer Test

test your printer with a quick hard print overhang 25,45and 75 degree angels on the top part and complex shapes.

KYLIE - Xtreme Strong Wheel Chock // KYLIE - Sehr stabiler Radkeil

Very stable wheel wedge for securing parked cars and trailers. The wedge prevents the unintentional rolling away of vehicles, trailers, motor homes and caravans. Due to its design and structure, it holds particularly well. Nevertheless,…

SW Millenium Falcon Extremely Detailed

I stumbled across this awesomely detailed Millenium Falcon surfing the net one night. I believe it was extracted from a game, as it was in some obscure file format. I've tried my best to convert it here in a couple of file formats. But it…

Backpacking Whistle - Extremely Loud

It is not easy to find to buy a good Emergency Whistle for Outdoor Survival so I made my own Extremely Powerful Whistle ! You can use for your safety to scare animals or in case of emergency, have an awesome adventure and leave no trace.…

SanDisk Extreme Portable SSD (SDSSDE61) Compact Case

Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…

TerraPi Extreme Duo open frame case for Raspberry Pi and 2x 3,5" HDD drives

The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…

Logitech Extreme 3D Pro Desk mount bracket for Thrustmaster Desk Clamp, Bolt or Zip Tie on

This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…

XXL Peephole 80mm diameter - Anal Butt Plug Extreme

Extremely Satisfying Fidget Clicker Wheel

What makes it special This wheel started as a prototype, and four out of the five prints I did worked. I plan to make another model like this one, but this version already prints easily and has no complex settings, which is part of why I…

Beyblade X stadium with working Xtreme line

I present you first 3d printable Beyblade X stadium with Xtreme line, that works. Major features: -Central defense area with 2mm high wall allows bey to stay in center if you want it to -Reverse curvature. Outer ring of stadium is tilted…

Extremely loud and compact emergency whistle

https://www.thingiverse.com/thing:2933021

EXTREMELY LIGHT Gridfinity Baseplate (Parametric)

I made some thin baseplates that save a ton of time and filament. The models I have included are shelled out at 0.8mm. I have included a parametric file for Fusion 360 - you can make any size grid and change the shell thickness. If you…

EXTREMELY LIGHT Gridfinity Baseplate (Parametric) with Bridging Support

Added bridging supports at the intersections of Doug Kremer's EXTREMELY LIGHT Gridfinity Baseplate (Parametric). This fixes the drooping seen in the 3rd picture. For the Fusion360 file, change the size of the grid with: Update Row and…

SanDisk Extreme PRO Portable SSD

SanDisk SSD drive mounting gadget with 25mm Mini Suction Cups, you need to purchase the Mini Suction cups from Amazon or anywhere else that has the same dimensions here is the link where I got mine AMAZON - print with support. - 15%…

Extreme Bridging Test Pieces (50 mm - 350 mm)

Longer bridging test pieces to test out the limits of your machine. Dialing in just the right bridging settings can reduce the need for support structures in 3D prints and thus reduce print time and material use. Keep in mind that the…

Extreme 80° "Atom 3D" overhang, printed on a Prusa Mk3

Yes, it can be printed on a Prusa Mk3. The folks at Layer One created this model as a marketing stunt for their Atom 3D printer, to show off the qualities of their model cooling solution. A 80° overhang is considered unprintable by many.…

Extreme Benchy 5 COLORS Test print MMU3

Extreme Benchy 5 COLORS Test print MMU3.

ER20 Threaded Chip Fan Remix - Extreme

Digital File to DIY 3D print ER20 threaded (25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a strong vacuum capacity dust boot. Use at your own risk (mine is working fine). STL, 3MF and…

Koenigsegg Agera X - Extreme Hypercar Model

Own a piece of automotive exclusivity with this 3D printable STL model of the Koenigsegg Agera X. This extreme hypercar model is perfect for automotive enthusiasts and fans of ultimate performance, showcasing jaw-dropping design and…

Blackmagic ATEM Mini Extreme mount bracket

This bracket is for mounting a Blackmagic ATEM Mini Extreme onto a Penn Elcom R1290/1U Sliding Rack Tray. Use 10-24 bolts and square nuts. (Washers also advised.) The left bracket is provided - just mirror it in the slicer to get the…

Gridfinity SanDisk Extreme SSD Holder

Simple holder for 1TB SSDs using the Gridfinity system by Zack Freedman . Fits up to 3 SanDisk Extreme SSDs for all your storage needs. Leave any suggestions below. Thanks!

Extreme angle 80° overhang test - 8 sides

Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…

Sandisk Extreme SSD Holder

Instead of having a bunch SSDs piled up on my work desk, I made this little storage tray to hold them tidily. It will hold 5 drives of varying sizes, there's a Sandisk Extreme & Extreme Pro in the photo with storage from 500gb to 2tb.…

Nuke Dukem Model Rocket - Extreme Series

Introduction : The Extreme Series of Builders Kits were designed to print, assemble, and fly easily. These rockets can be flown on lower-powered motors in a park, or with higher-powered 24/29mm motors. Typically, an Estes F15 can loft…

For Dell Rugged Extreme 7202/7212/7220 Tablet Handle V2

Two angled parts for the Rugged Extreme Tablet to create a handle. You need a few extra Materials for this. Firstly, a rectangular tube with 15x15mm and a wall thickness of 1mm. Cost: ~5€ for 1000mm My tube needed to be cut to a length of…

SanDisk Extreme PRO Portable Case (SDSSDE81)

Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…

Guinea Pig Stack (Insane Extreme Edition)

A cute guinea pig with increasingly smaller guinea pigs riding on its back. Check out my other guinea pig versions here: Guinea Pigs Collection by Bovideus | Printables.com Changes in this remix versus the original: Gave the guinea pig a…

SanDisk Extreme Portable SSD (SDSSDE60) Compact Case

Remixed to fit the older SDSSDE60 version

HIVE EXTREME with Gameboard and Box

HIVE is one of our absolute favourites for two players. It is very entertaining and offers a lot of strategic and tactical depth. Every game is different and many a game that was thought to be lost was turned round at the end. HIVE is…

Extremely frightening Halloween pumpkin! Illuminated eyes and mouth with LEDs

Ultra-Scary Halloween Pumpkin! Instructions and Assembly: Print with tree supports. Note that the supports inside the mouth are quite difficult to remove; take your time and do it piece by piece, being careful not to damage the teeth. The…

Parametric memory card holder / case (SD, MicroSD and others), extremely compact and lightweight, with FreeCAD source.

Purpose. I'm quite satisfied with the C001 Micro SD card holder and case at home but I found that it is too big and heavy for bike touring trips where small size and weight are really important. So I designed an extremely slim and compact…

Logitech Extreme 3D Pro Joystick Mount

A mount for the Logitech Extreme 3D Pro Joystick (https://www.logitechg.com/en-us/products/space/extreme-3d-pro-joystick.963290-0403.html ).

Replacement Flick-It for Bop It Extreme 2

Replacement flick-it for a Bop It Extreme 2. If you broke your flick-it print a replacement!

Fat Charlie 80mm diameter - Anal Butt Plug Extreme

Nike Smoke Extreme! - Model Rocket

Update 6/5/2024: I have updated the Nosecone. The original appears to be an early version and while printing, it broke easily at the shoulder. The new one should work much better. I also modified the z-axis height so now it sits at…

Wall mount JBL xtreme 2

I tried to make the mount as hidden as possible. I have also included an .stl file to help determine the spacing of the holes. The helper only takes around 2g of filament.

eXtremeRate dualsense Controller Holder for Ikea Skadis

I have this eXtremeRate rise remap kit so i did some modification

SanDisk Extreme Portable SSD (SDSSDE61-1T00) Compact Case - Redesign with port and better fit

This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.

Makita bit holder - Mini to Extreme (differen sizes)

Here I share with you my design of a bit holder for any 18V Makita Drill. My design does have a notch so this "thing" sits properly and flush on the battery socket. I also created different sizes to store different amounts of bits. The…

JBL Xtreme shelf support

I developed a simple support to leave my JBL Xtreme suspended on my 15mm shelf, it was useful to reduce the space on the table and leaves the box in a good area to listen to music while I work. Also added the f3d file so you can edit in…

TOO EXTREME JOYSTICK FIDGET

I designed this to be like Tomo's fidget joystick but it allows for more range of motion. Its pretty fun but they keep breaking on me eventually. If anyone manages to print one of these in a way where it survives please let me know! I've…

Ikea Skadis CA Super Glue Bottle Holder for Extreme Power

Skadis super glue holder for 1oz bottles of Extreme Power CA glue from Hobby Lobby. Bottles are 25mm x 38mm, print with supports.

Extreme Vase Mode Test – Slim Structure on Three Layers

A model designed for extreme testing in vase mode. This tall, thin structure on a stable three-layer base pushes the limits of print precision and stability with minimal material usage. Perfect for height and thin-wall calibration tests.…

Extreme TEST print V2

This is V2 of my extreme test print. It will help you calibrate your printer and test your overhangs and printing temps with areas that you can measure to ensure your printer is printing the correct dimensions

Apple AirPort Extreme/Timecapsule Holder

This is just a simple wall mount for your beloved apple router. You can either mount it on two screw heads or for more security you can use M8 hanger bolts.

Red Max v1.1 Model Rocket Kit - Extreme Series

Introduction: UPDATE 5/27/2024: I have added a printable body tube. This has not been tested but it should work with PETG, ASA, or ABS. The recess for the nose cone is shallower than the fincan (38.5mm vs 40.5mm), so don't get the…

Extremely High Poly CUBE

The high poly count cube is a meticulously detailed 3D model composed of over 1.5 million vertices, making it incredibly intricate and visually stunning. Each vertex contributes to the overall complexity and smoothness of the cube's…

SasnDisk Extreme Portable SSD (SDSSDE61) Case - With Port Exposed

Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.

Goblin Extreme Model Rocket - BT60 with a 29mm Motor

Update: The maiden flight was conducted on August 17th, 2024, at the C.R.A.S.H. launch event. It was flown with an Aerotech E30-7, achieving an apogee of 1,003 ft -- seen here . ---- The Extreme Series of Builders Kits were designed to be…

Support Models for my BT60/29mm Extreme Series Rocket Kits

UPDATE: 8/19/2024 - I added two different motor adapters, a single 24mm from SiegeCraftPB for Aerotech motors and a clamshell design for Estes D bp motors from CWBullet UPDATE: 7/18/2024 - I added a thrust ring designed for the Estes 29mm…

Mount - Sonoff ZBMINI Extreme

I bought some Sonoff ZBMINI Extreme Zigbee Smart Switches which are normally placed directly behind the power socket. In my case I had to place them in a bigger box and mount them there. See article EAN 6920075742916.

EXTREME Propeller Launcher

This propeller launcher improves the supreme propeller launcher bringing it to an extreme level with over 200% of its performance. • Increased gearbox strength for high RPM • Variable propeller pitch to maximize lift • Simplified launch…

Extremely Flat Picatinny Riser

Remixed the original file. I made it as flat as possible, many attachments might not even fit. I made it so I could use my red dot sight with iron sights at the same time. Category: Sport & Outdoors

ATEM Extreme stands

These are the same model I sell commercially for the ATEM Extreme (ISO). 2 versions, one that is designed to be use as a left and a right, same file, and it is the standalone. The other has a right and left, that is the bolt down which…

Spin it Replacement - Bop It Extreme

The 1998 Bop It Extreme is a fun childhood toy of mine, and the "Spin It" is my favorite part. The Spin It had been getting more wobbly and harder to spin, and finally it failed completely. I designed and printed this replacement Spin It…

JBL Extreme Pegboard Mount

This is a pegboard mount for the JBL Extreme bluetooth speaker. Fits versions 1 through 3 of the JBL Extreme series speakers. using standard 1" spacing for the pegboard holes. Supports recommended for the pegs. Infill: 60% Filament brand:…

Extremely efficient wine rack

I was disappointed with commercially available wine racks and with the other wine racks on Printables. I don't know if this is the most efficient wine rack - but I do know that it is extremely efficient. It is ideal stacking of circles…

Voronoi Cat Ball / EXTREME Overhang test.

Printing : You may want to simplify the model before printing in your slicer. For Print-in-place model: use GLUE and BRIM for build adhesion, because it won't print without it. For Multiple Parts: use GLUE AND BRIM only for (Voronoi Cat…

Sandisk Extreme Portable SSD Mount / Cradle, Single / Double

These are models I designed to mount one or two Sandisk Extreme Portable SSDs to a vertical surface (ex. back of iMac). I used 3M Command Strips to safely and cleanly attach the mount to the back of my iMac. The same method can be used to…

Halter Dell Latitude 7220EX Rugged Extreme Tablet

Die Dockingstation dient auch als Anti-Rutsch Funktion. Stützstruktur ist nur beim Kabelauslass nötig.

Sandisk Extreme SSD Case

Here's a case for your Sandisk Extreme Portable USB-C SSD. I wanted a case that was a little bit of protection, without adding too much bulk. It has 2mm walls. I've tested with 25% infill and with 100%. Since it's so compact, I'd…

Extremely simple wall mounted filament holder V2

Version 2.0 of my filament holder. reduced material usage of about 40% of the original. Stronger design and faster printing. This is just a simple wall mounted spool holder. Designed to be screwed to a wall with recessed holes for screws…

Kickstand for Dell Latitude Rugged Extreme 7212 tablet

I didn't want to pay $50+ for a kickstand so I designed this one instead. Requires three screws, two O-rings, and two thread inserts. Heat up the thread inserts and press them into the holes on the ends of the mount piece. Push screws…

The Mind & The Mind Extreme - Photo Storage Board Game Insert Collection

The Mind & The Mind Extreme This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. Made specifically to fit Photo and Craft Keeper…

Sandisk Extreme SSD carrier

Box for 2 SandDisk Extreme SSD and accessorise (usb cord and USB 3 adapter). I added a space also for a microSD to SD adapter. My disks are 500GB and 1TB so one part is a little bit smaller. Remix Is permitted to feed any needs. Do you…

Badminton Raquette Grip Handle for Cariton ISO Extreme 7000

Print: 1.2mm - Wall thickness 5% - Infill (cubic or honeycomb) PLA With this settings you will get weight close to original handle ~27g 2. I used epoxy to attach handle to the rest 3. Wrap it 4. Post your make 5. Play! Your logo or name:…

Hydra Pro AMS premium Ring mod extreme +

I designed this ring to fix spools from falling down of the front roller AMS/Hydra. I use these rings in my Hydra Pro System and it works fine. This is my first design ever. Please don't put the ring in your nose. It was a nightmare for…

Noctua Conversion Kit for ZOTAC GTX 1080 AMP! Extreme Edition

Hardware: 6x M2x6 countersunk screw (ISO 10642, DIN 7991) 8x M4x20 countersunk screw (ISO 10642, DIN 7991) 8x M4 nut (DIN 934) 3x Noctua NF-A9x14 PWM fan (or equivalent) Print instructions: Use a material that's capable of dealing with…

SONOFF MINI Extreme series - DIN railmount

DIN railmount for SONOFF MINI Extreme series. There are two versions: Standard : MINIR4 MINIR4M ZBMINIR2 MINI-RBS MINI-ZBRBS MINI-2GS MINI-ZB2GS MINI-ZB2GS-L Dimmer : MINI-DIM MINI-ZBDIM

Simucube 2 Pro extreme rigit dash mount

Hello, this is my attempt for a very rigit mounting solution for the DIY Dash Pro from POKORNYI ENGINEERING for a SC2 wb

Prusa Game Dice [EXTREME]

Prusa Game Dice [EXTREME] Want to spice up the game even more, Well i got the perfect dice to make it much harder and fun . This dice includes: Add 1P, Add 2P, Add 3P, Add 4P, Add 5P Move a Player. To make it even more hard/Fun, When…

AGM-12D Bullpup - Extreme Series Model Rocket Builder's Kit

Introduction : The Extreme Series of Builders Kits were designed to print, assemble, and fly easily. These rockets can be flown on lower-powered motors in a park, or with higher-powered 24/29mm motors. Typically, an Estes F15 can loft…

Extreme Adventure Set (42069-1)

This is the Extreme Adventure set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name,…

PS5 eXtremeRate Wall Mount

I remixed this design so that it can be screwed to a wall. I also added a second variation that includes a cutout for a charging cable. Have not tried it yet. Will post an update when I do.

Extreme Bridge Printing Test

Model intended for extreme bridge printing test. Challenge accepted?

Extremely Smooth 6, 10, 15, and 20 mm Marbles

Supports: On Brim: On Infill: Depends on what you are using the marble for.

Coleman Xtreme5 Cooler Handle

Lent the cooler out and it came back with a broken handle. This model re-uses the “nubs” that hold on the original handle. It functions the same as the original - can be rotated around etc. Printed in PETG. I have lifted the cooler up…

Sandisk Extreme Portable Case

Case for Sandisk Extreme Portable to protect and carry usb cables with it.

Wall Mount for Black+Decker Extreme Cordless Vacuum Cleaner

This model was deliberately made chunky to handle the weight of the cordless vacuum with the battery and attachments. Print it oriented with the back of the mount on the build plate , 15% infill with a 0.2mm layer height will work fine,…

SanDisk Extreme SSD Rack (5 Slot)

My first upload! A tabletop rack to hold SanDisk Extreme SSD devices.

Rays Gram Lights 57 Xtreme Wheel Caps

These new caps fit my Rays Gram Lights 57 Xtreme wheels. They are 17x9 with 5-100 hole pattern. I'm sure the center caps are fairly similar. Worth a try printing if you have a wheel made by this company. Make sure you print in PTEG or…

Sandisk extreme external SSD mount

This is a mount for the sandisk extreme external ssd. I Used it to mount the ssd to my Desk.

Logitech EXTREME 3D PRO Joystick Throttle - Elongated

Extension for the Logitech Extreme 3D Pro joystick's throttle.

Arduino UNO / Duemilanove / Diecimila / Leonardo / NG / Extreme Drilling And Mounting Plates

This thing is obsolete. It is replaced by https://www.prusaprinters.org/prints/43002-classic-arduino-mouning-plate . This thing contains a mounting plate and a drilling guide for the “Arduino UNO / Duemilanove / Diecimila / Leonardo / NG…

Apple A1521 6th Gen. Airport Extreme Base riser stand, wall mount, joiner

I designed this to raise the airport fan from being so close to desk and the scratching of the bottom of the Airport. A 2nd Airport also fits underneath if wanted to stack two or more. Put a rubber band around bottom of Airport to make…

Extreme First Layer Test

The Model is perfect for showing small bumps, because even if there is a bit too much of a gap between the nozzle and print bed the print wont stick and the edges arent clean. The Settings should be based on your normal first layer.

Clip ceinture motorola T80 extreme

Clip ceinture pour talkie walkie motorola T80 extreme Clip renforcé pour une meilleure solidité A imprimé de coté avec support

Extreme shot

Extreme shot et un socle avec une flèche tournante. Jeu de soirée donc le but est simple, lancer la flèche et elle finira par s'arrêter sur quelqu'un autour du verre. L'heureux élu aura pour la joie de goûter à l'élixir préalablement…

Hook and base for Menards Xtreme garage shelving

I have a bunch of Menards Xtreme garage shelving for storage. I wanted hooks that fit the sides of the shelves so I designed these. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes…

ASRock Z87 Extreme4 IO Shield

IO Shield for ASRock Z87 Extreme4 Motherboard 2020-11-17: Added second version, more like original one (with holes for audio). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100%…

be quiet! Conversion Kit for ZOTAC GTX 1080 AMP! Extreme Edition

First thing, many thanks to testudor for the original kit, this mod is a life saver. To be clear first, you can mount any 92 mm fan to the original frame, as long you can make it work. But the frame of the be quiet fans were in the way of…

Extremely Fast Miniature Bases with 5mm x 2mm Magnet Holes

These are some very fast bases, perfect for anything that needs a base quick! Let me know if there is a base size or magnet size that could be helpful, and I will happily add them.

Begode Extreme EUC Kickstand Spacer and Airtag Holder

The stock kickstand on the Begode Extreme isn't quite tall enough which means the metal mudguard hits the ground when you put the EUC on the stand. This is a simple spacer to add a bit of thickness which keeps the mudguard from touching…

Voron Cube of extreme speed

This is a voron cube that can print neatly without additional upgrades when the printer is very well assembled. Printed at @150mm/s 6k accel. Please post your time and records to makes! The temperature is set between 250 and 265 degrees…

Antenna holder for Extreme flight planes (100"-105.5") (using XT60 panel mount holes)

Printed them in ABS myself 100% infill