299 models
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
Print approx. €16.10–€19.68 excl. taxPreliminary estimate for one variant
The Imago Mundi dates back to around the seventh century B.C.E. and is considered to be the oldest world map ever discovered Created around the seventh century B.C.E., the map centers around the Euphrates River and includes various…
Print approx. €9.00–€11.00 excl. taxPreliminary estimate for one variant
This model is a detailed, scale reproduction of the Y25 single-circuit 400 kV high-voltage tension pylon , an essential component of high-voltage electrical grids. The design is based on a precision 3D photogrammetry scan taken in the…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Since many of you had problems with attaching the Shield to the face with rubber bands we proudly release our Remix for a Headband. It is tested by medical personal and has the big advantage of not giving you pressure points anymore,…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €16.62–€20.31 excl. taxPreliminary estimate for one variant
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
High voltage electricity pylon (tower) suitable for G (LGB) garden railway or any other model landscape for children. Real wires can be used to provide the low-voltage power to the model landscape/railway. Gcode file contains the suitable…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Old Babylonian culinary tablet (1900-1600 BC) with Akkadian recipes for 25 stews. Stews from this tablet were studied, cooked & served at An Appetite for the Past at NYU in May 2018. For more info, please see: Martell, B. What did ancient…
Print approx. €11.43–€13.97 excl. taxPreliminary estimate for one variant
Salut, Voici un modèle pour simuler plusieurs pièces empilées qui ne consomme que 4g de PLA. A imprimer en mode vase. Il suffit d'ajouter une pièce d'origine gravitrax au sommet de l'impression pour assurer la compatibilité.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Spielzeug Baustellenpylon für den kleinen Bauarbeiter Mehrfarbdruck mit MMU3 ( am besten 49 Stück drucken, da die gleiche menge Müll wie bei einem Pylon anfällt, siehe Bild3) Unser Bauarbeiter nutzt sogar den Abfall als Straßenabsperrung…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
This is a temporary child safety lock that provides a more difficult locking solution, but provides the flexibility to leave open if desired. Print instructions The buckle should be printed vertically (on end) and then the other two parts…
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
Traffic cones are too big to fit on your desk so why not make some model cones for decoration or play? These 52 mm tall models stack together like real cones. There are three models ready to print. First, the snap together multi-colour…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Cable - Nylon lock holder - Honeycomb storage wall - STEP files
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
While checking out the Fuse 1 from Formlabs, I spotted that they offered a variety of sample prints done on the machine to check out the quality for no cost and no shipping. After evaluating the nylon 12 case linked below, you can make…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
This is a reference pylon for the Rivarossi 5523 model train bridge, to replicate the different ones simply scale it on the X axis. For reference (in Italian):…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
If you have a Pearl 900 series cymbal stand and this piece broke for you, I got you covered. I designed this because mine broke back in 2018 and I was on a hurry. 7 years onwards and its still working perfectly ! If you don't want to…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This rivet puller is designed for removing the nylon rivets when converting the Core One+ to the INDX system. You can place it directly on the rivet and slide it underneath the nylon rivets. Dieser Nieterziehen ist für das Entfernen der…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
The vacuum comes with a long nozzle that accommodates a brush. I leave the long nozzle/brush setup attached to the hose. I made this nozzle and leave it attached to the vacuum and only remove it to use the hose setup. Disregard the 1 & 2…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
A brace to prevent sagging for Manglerat's UCS-scale Babylon 5 once hung from the ceiling. Despite adding reinforcements to the radiator panels, the lower panels still tended to sag inward. By putting this brace on the forward lower set…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Tool for working with Pylontech LV batteries (external charging and discharging - 2mm test probe diameter) and other batteries using the SurLok QLB connector…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
It has all happened before and it will all happen again. In hot pursuit of the Colonial Fleet, the Cylon Raiders swarm in to attack with overwhelming numbers. Commissioned to go along with my Viper MK.II Kit Card , you too can create your…
Remix of this mesh on thingiverse, which starts out with the basic shape, which I've smoothed out to a high poly mesh, then added approximate cut-out details from reference photos. It's symmetrical, so one can print half of it twice and…
From the 1978 Classic TV Show, Battlestar Galactica, 3d print your own Cylon Cosplay helmet! This model was designed to take advantage of 3D printer settings to change a solid model into a thin shell to reduce print time and material.…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
A toy train pylon that grabs the tracks for better stability. The way it is designed it can be printed without supports and bridging only. The heights of the cross connections of the pylon are slightly shifted such that a nice bridging…
Two-tone print - The red is a two-tone sunset filament.
Pylon / Leitkegel - traffic cone taper 16.044° (DIN EN 13422)
This is a 400mm wide Shadow ship from Babylon 5. I didnt draw the original model, the original can be found here: https://www.thingiverse.com/thing:40536 But i wanted a larger one than my print bed could do in one piece, and the original…
Mini traffic cone model perfect for RC models. Enjoy. Layer height 0,20 Infill 10% Perimeters 2 Standard noozle 0,4mm Second color height 15mm Third color height 25mm Fourth color height 35mm Fifth color height 45mm Material PLA Used…
Helmet for Dummy 13. Created in the style of a Cylon Centurion from the original series of Battlestar Galactica. A single-piece design that should print fine on it's side, as supplied, with supports from the build plate for the cheek and…
This is my 86mm long Minbari Sharlin cruiser from Babylon 5. Its in the same scale as my 92mm Omega Destroyer, and the Revell Babylon 5 station model kit. I printed it on an Anycubic Photon at a 0.05mm layer height. It is intended for…
I loved Battlestar Galactica as a kid and I found this cool model over at the STL Finder https://www.stlfinder.com/model/1970s-battlestar-galactica-cylon-centurian-helmet/5612916 I've modified it a little to best represent how I thought…
A remix of Marian87's Babylon 5 Thunderbolt on 3Dwarehouse. Borrowed the badge from Inquisitor. Fixed many issues since this model was not intended for 3D printing. To be done: Decals and Missiles Fixed canopy framing Fixed wing…
A cylon miniature, suitable for tabletop gaming. Print instructions Category: People
This is a model of the Minbari WhiteStar form the Science/Fiction Television show Babylon 5. Print in any filament and scale you want.
If you want to support me, please check my other models too! I do very niche projects mostly. Thus, understandably, only few of my models become popular. But chances are high that you can find inspiration from my specialized works.…
Gedruckt wurde die Pylone auf einem Prusa MK4 mit 0,4er Düse, PETG. Die Pylone ist im Slicer skalierbar. Die Farbgebung kann im Slicer angepasst werden. Auf dem Foto ist die Pylon 100 mm hoch.
A mechanical tape counter belt for Revox A77 or B77 1/4 inch tape recorder. Print instructions Printer file is for TPU filament.
Man zieht alle 5 Teile mit dem Namen “Kegel” in den Slicer und es wird in der Regel erkannt das es sich um ein Objekt mit mehreren Teilen handelt. Die Positionen wurden aus Fusion360 mit übergeben. Danach kann man ich entscheiden, welche…
Slowly getting back and tidyng up my original files, Cheers Jace
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Here's my take on the original series Cylon centurion from Battle star. I't been split with Luban and the eye scanner piece goes from the inside and pushes out The mouth guard just glue in place I made the small holes in the forehead that…
created mini Pylons for Dr!ft Cars - 1:43 10x10x12 all Pylons on Thingiverse are to big so some hours on Fusion 360 (first time)... and 10 Versions Later... think it looks good here Fusion shared link for the Part https://a360.co/2qcAImp…
Sovol SV08 - Nylon gantry cable mod Usually the gantry wires often get in the way, especially on higher prints as shown in the video and sometimes they seem to get even caught by the gantry… So not ideal if you don't want to babysit this…
Traffic Cone // Leitkegel // Pylon (LEGO DUPLO compatible) need more? print more :-D This is not an LEGO® part, i build it by my own ..
Maqueta de la nave G'Quan Heavy Cruiser de Babylon 5
Decorative obelisk found scattered around areas where Precursors had been working. Tree supports are recommended. The two-piece version uses less support material and can be glued together.
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 12 cylindrical neodymium magnets, Ø8mmx3mm…
i couldn't fit my Stanley Tylon Short Tape Measure 5m / 16' x 19mm in the ordinal design so i increased the size to fitment
Estuche diseñado para guardar y transportar una guía jalacables de nylon de forma compacta y protegida. El modelo se compone de tres piezas : dos carcasas y un mango, sin necesidad de soportes para la impresión. 🔹 Nota importante: En la…
a scale pylon for your R/C car that is also stackable. you can adjust the size and scale of this part in your slicer to make it the size you want for your rc car Print instructions Category: R/C Vehicles
A bridge pylon for Brio and compatible toy railroad systems This is a simple bridge pylon for all wood toy railroad systems with a track width of 40mm: Brio Hape Eichhorn IKEA ... With this design, the track is raised to 63mm. (only…
Print in something strong (Polycarbonate or ASA or similar), in the orientation the parts are in the model for maximum strength, without supports. Clean up the parts and snap them together, with the teeth on the latch pointing towards the…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
I extracted the low poly model from the game and then increased the poly count and smoothed all the surfaces. These are blown up to max size for a Prusa but you will need to split the top crystal into 2 pieces to fit that part. You will…
Perfect for bed leveling nylon lock mod ~ 6mm MK3s+ bed spacer. Used for nylon nut tesion and set initial height to Prusa spacer's 6mm.
Channel the iconic menace of the Cylon Centurion Helmet, a perfect blend of futuristic design and robotic precision. With its sleek curves and unmistakable visor design, this helmet is a must-have for fans of classic sci-fi and cosplay…
Chameleon (Nylon filament) Blog： http://3dppark.com/blog/5937074 Print Settings Printer: CR-7 Rafts: No Supports: No Post-Printing How I Designed This Category: Art
All models i could find were laden with imagined detail on the right-hand side of the body, so I made this version and fitted the grip from metaform3d's model.
The Babylon Hanging Basket Us Brits call them hanging baskets but I think they're better known as hanging planters in the rest of the world, anyway….. I wanted to design something that could be modular in design and therefore fit many…
Replaces the pylon cover behind the seat, needs some work. I have also shared the f3d file to edit, feel free to optimize and tag me.
A Cylon helment/head from Battlestar Galactica. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've…
This is a Cylon Heavy Raider , for your ever expanding 3D printable Battlestar Galactica collection. I have included the assembled model, and the model cut in half for easier printing. Print and Enjoy! Model taken and scaled from Sketchup…
This is a 9 cm ( 3.5 Inches) high articulates action figure of Isaac the Kaylon from The Orville TV series. Yo can print it in a kit card fashion or as separated parts.
This is a design I'm working on for some outdoor yard lighting. The basic design is emulating the Philips Hue Bollard lights ( https://www.philips-hue.com/en-us/p/hue-white-and-color-ambiance-calla-outdoor-bollard/1741930V7 ). I liked…
I made this to help keep the extra part of the belt secure. Because this is a belt made for a holster, IWB, you need a little extra length when you do carry. This great little American Flag part helps keep it under control. Make sure for…
1mm version. Sadly it isn't as flexible as it original counterpart. You can try to scale it down on Z axis to your own preferences.
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
Strap length adjusting device for webbing or fabric. Who knew it was officially called a Tri-Bar Adjustable Slider?! Designed for 45mm - 50mm fabric or webbing Can easily be scaled to fit other widths. See video below for some generic…
https://www.oxo.com/oxo-gg-9-22-5cm-locking-tongs-w-nylon-head.html?gclid=CjwKCAiAjrarBhAWEiwA2qWdCBkAKjVveNhWKr5IB8E0I1
Melted original and decided to print them myself. CF nylon, 0.3mm nozzle, 0.1mm layer hight and fits perfectly.
I made these models to have terrain for my wargaming table with the same functionality as tournament terrain. The gate just came up. You will need top print one top and three stairs for each wall, and two tops for the gate.
My wife needed some pylons for dog training. The ones you can buy here are about €8 apiece, so I whipped this up using the form library in PrusaSlicer. Size (X/ Y/ Z): 120 x 138.5 x 177.5 mm I printed those in PLA, and they turned out…
So, you replace your crushed snap buckle, but you had to cut the folded end open to get the new buckle on the strap. Since you have a strap full of plastic buckles, you might as well have a plastic end piece to keep the strap from running…
When the printer is used without nylon rivets, the holes add an unwanted escape route for hot fumes (besides the corners - Kapton tape to the rescue). One spare included at no extra cost :-)
Inner Dimension: 12.2mm Outer Dimension: 22,5mm 22 x 3mm Teeth, Module 0,93 USE ABS
Was working on a DFRobot chassis with a pi and some hats and Adafruit nylon standoffs and wanted something to be able to grab them in between or under PCBs or the chassis and came up with this and working on a few other tiny tools now.
a simple wrench for nylon spacer / stand-offs
Collect water and don't introduce solids into your tank with a nylon sock filter! Snap on lid and smooth surfaces to keep the safe.
Fits well into Capricorn (and others) 2/4mm PTFE tubes without adaptors. fs-cover requires support . Recommend to use PETG (black for the fs-cover) and quality settings. Be ware of “elephant foot” Rollers inside the drybox are designed…
9 cm (3.5 Inches) articulated action minifigure of Isaac the Kaylon from The Orville TV series, Season 3.
This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it. The video explains a lot of it. I was able to print this without…
These are friction-fit tags that you can use to color code your Jimylongs lock picks. If you'd like, you can simply buy these in a bunch of different colors and support 44 Delta in making more items like this available: Buy Jimy Tags…
print with support, it's mainly for the hanging part for screw hole. or not, if you find it hard to remove, or you have unique understanding on slicers
Kabel Abstandshalter für 25qmm Kabel Pylontech Akkus. Damit können mehrere Kabel sauber zusammen verlegt werden, ohne das sich die Hitze staut.
A star wars inspired Tatooine Lamp designed on the concept of pylon from the movie. All parts fit together but need to be super glued in place. A simple mini screw bulb holder (table lamp bulb or one used in fridge) will slot in the clip…
Replacement Gear for Kenwood Chef blender Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Taulman Bridge Nylon Natural Notes: Print with large circle at the base and use…
A printable replacement for Nylon spacers used in some recent CaptainSlug designs. Printed flat instead of vertically in order to not snap along the layer lines as easily. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Printing instructions: 4 perimeters 40% infill No supports Material: Polycarbonate Blend recommended. Should work in PETG as well. Bill of materials: some glue (hot glue, super glue, epoxy… etc. pretty much any glue will work) 7/8"…
Recording Artists - Country - Waylon Jennings 3D printable model.
This loop is specifically tailored for a 20 mm wide and 1 mm thick nylon strap. If you need a loop for different strap sizes, no worries – just drop a comment or contact me directly, and I'll work on a design that fits your needs. For the…
This is a 1:578 scale model of the Scaled Composites Stratolaunch aircraft—a replica of the world's largest aircraft by wingspan, measuring a staggering 385 feet across! Originally designed to launch rockets into orbit mid-flight, the…
This set of 4 coasters, inspired by the 90's cult sci-fi series Babylon 5, features four different, multi coloured logos, recognisable to any fan. Each has been designed to make use of pause for colour swap in PrusaSlicer. Dimensions (…
Use those: https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs?_pos=2&_sid=34d0fc8a7&_ss=r
