Counting matching models…
https://github.com/geaz/simplyRetro-Z5 This repository contains everything to rebuild the simplyRetro Z5 . The Z5 is my first attempt to build a custom emulation handheld from scratch. It runs a custom linux image for emulation to…
English description (German description below): This is a replacement handle for the Hager 90SL FZ505 switch cabinet. Printing: I printed the part with a Bambu Lab P1S, 0.4mm nozzle, layer height 0.2mm from PLA.Handle-V0 +…
The clutch of the Bosch MUZ5FW1 meat grinder has a predetermined breaking point to protect the food processor motor from overloading. Since I didn't want to order a new clutch every time this predetermined breaking point breaks, I…
WZ5005 power supply box. If you are unfamiliar with the mains supply voltage, consult a qualified electrician. Both power supplies are Meanwell LRS-100-24 adjusted to 27v. connected in series a total of 54v. A choke filter can optionally…
I printed this to hold my Z5500 control pod against the wall. You will need to unscrew the included base that comes with it. There is a hole at the bottom for cords to come through and I exposed the 2 inputs on the side as well. I just…
921973Z520 hyundai i40 headlight mounting
I find it very hard to read the Volume level on the knob (see pictures), so i decided to model an indicator. Pleas note that the indicator does not clamp tight on the knob. But that is not a problem because as soon as you touch it you…
Der Fix, wird einfach in die linke Fahrspur geklemmt. Er erhöht die Spur um ca. 2mm, so das der kleine Seitenmob nicht mehr an der Wanne hängen bleibt und der Roboter problemlos andocken kann. Es kann sein, dass je nachdem wie genau euer…
Got a new set of speakers for my office computer. I wanted the satellite speakers wall mounted (I have no other place for them) I took advantage of the rectangle sort of sticking out the back, it also tapers getting ever so slightly wider…
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle. To make it easier to print without support, I also added the models with one flat, non-faceted…
I made this modell for universal nixie motherboard you can find it on ebay or aliexpress. I used original rft socets and m3 srews. you need to glue the socets holder on the housing and the legs to housing.
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
mag_holder_ak is a slot loading mag holder for ak mags. It holds ak47 and ak74 steel and bakelite mags. Vz58, hk g3, and cetme mags also fit. Check out the main page for Open Armory for more information on the system. Also check out the…
Weil meine beiden Boxen vom Logitech Z533 Soundsystem auf dem Schreibtisch viel Platz wegnehmen habe ich mir diesen Wandhalter erstellt. Die Boxen passen in die ausgestanzte Mulde, dort haben sie auch ein kleines bisschen Platz zu den…
DE: Fix für gebrochenes Saugrohr/-schlauch des Siemens BSH Staubsaugers (Modell VBBS10Z5V0): Defekte Kunststoffteile entfernen vom ursprünglichen Rohr/Schlauch. Vier 3-mm-Löcher in den verbleibenden Abschnitt bohren. Das gedruckte Teil…
This is a zoom gear for a Nikon Z mount 16-50 lens, for use inside the Nauticam Z50 housing. This design will require a M3 screw and M3 nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a zoom gear…
A small nipple for the brewer part in a Jura Z5 coffebrewer machine. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Add north PLA White Category: Replacement Parts
Hager Isolierstück universN UZ00Z5 modifiziert für den kombinierten Einsatz mit Leitungsführungskanal UZ51A1/UZ52A1 auf Hager Verteilerbaugruppe Reihenklemmelemme UD31A1 /A2. Das von Hager mitgelieferte Isoliertstücksystem auf Kunststoff…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
I needed some mounts for my speakers Logitech Z533 speakers but didn't want to put them on the wall. So I made these side mounts for my monitor stand. Can be screwed into the wall or any where really I've uploaded to versions. Thick for…
This is a remix of the awesome AK Speedloader by “nnicclaas” https://www.printables.com/model/265775-ak-magazine-speedloader . The modification adapts it for the VZ58 magazine. Unfortunately, I do not have a photo available. Recommended…
If you need a pic-rail-mounted stock, you've got lots of very modern options. But if you want something a bit more classic from back when stocks were whittled from logs or molded from beaver puke, the pickings are slim. So I made this.…
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
Want to use your Optoma UHZ50 on top of a tall shelf in the upside-down orientation without having to drill holes and mount the projector on the ceiling? Then this stand is for you. If you like what I'm doing, please give it a like 👍…
Nikon Z5ii is quite small for big hands so i designed a grip easy to attach and makes feeld better
At Thingiverse there is a few cases for Sony Xperia Z5, but non of them meets my expectations. This is why I have designed a new and better one. This phone case fits perfectly on phone and don't make phone much bigger. Top and bottom of…
What is that? Intake manifold / carburetor gasket #09 for Honda Z50 Monkey. Fits the original Honda 16100-165-924 carburetor. I printed mine in PETG and the other option in TPU. Both materials are equally suitable. When using TPU, no…
A slightly reworked version that removes drill holes to enable command strip fixing (or other adhesive). Also added a 25 degree inward tilt to each speaker, so they're no longer facing straight out, but face more towards you. Added left…
I remixed the awesome model to fit a ESP 32 D1 Mini.
I have the same power supplies but 6.3A each. They are longer than in original design. I've created elongated version for the back part. Also I've put different type of switch and plug as well as place for the fan 3010.
This is a 3mm acrylic laser cut enclosure for the Lulzbot Taz5 enclosure. It uses the corner brackets to hold it in place and encloses the whole printer. If you don't have access to a laser cutter you can purchase a kit that includes…
Ich verwende hier nur 2 Druckteile, den Magneten, die Sensorplatine und den D1 mini. Der Deckel klemmt ausreichend fest, Tasmota installiert, DTZ541- Script bei Tasmota eingefügt…und fertig.
Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
you can use any type of rounded tubes with diemsion 30mm. you need to have original socets or printed socets for the tubes. the socet holder neded to be glued for the housing. the kit:…
This is a replacement part for a BOSCH style Kitchenaid. It's used to couple the machine with the worm gear to grind meat or cookie dough. I found this on a russian website and it was pretty hard to fine so I thought I would share it…
Für die direkte Installation eines Raspberry im Zählerschrank ist die USB Version bei uns günstig. Ich wollte so wenig wie möglich Druckteile und das Ganze so klein wie möglich. Den TTL-USB Wandler schiebe ich in den Boden, der am Deckel…
It was always a struggle to see the volume level on the original remote control knob. I decided to create this knob that makes it easier to see the volume level and also easier to grip. To create the visibility I made the indicator line…
Extended pistol grip for VZ58, i reccomend to use PETG/PETG-CF or PC/PCCF. Changelog:
My Zonestar Z5MR2 came without a mount for the X endstop. The cable for the Z endstop didn't match the switch that was mounted to the frame. The Y endstop allowed the bed to home too far back, limiting the bed position that was useable.…
should fit on the ares VZ58 with no problem or slight filing the back part
Just a few parts I made while working on a CRF50F. It is two handle bar end fillers to reduce help the grips survive a fall without having a hold punched in the end of them. I also add a small bushing between the rear brake pedal pivot…
Edit. Added my ztool for leveling. I've had my TAZ5 for about 2 weeks and these are the gadgets I have made to help get it working properly. I'm NOOB to 3D printing but a old hand at g-code with CNC routers, mills and plasma cutting so…
its for rft z568m tube ore simular. Print with pla 100%infill. I used old cumputer dsub connector pins and put it with soldering iron.
perfectly fitten horizontally speaker holder for the z533 from logitech Print Settings Printer Brand: Creality Printer: Ender 3 Category: Audio
This is a holder for the cross slide for the watchmakers lathe CZ50 by Michael Chung. It holds the cross slide safely when not in use.
Replacement lens cap cover for the Genmitsu/Sainsmart Z5-1 1064nm laser
I have used Prusa PC Blend for beater adapter and classic PLA for the pad. There is hole for neodym magnet 6x3mm for pad. Tested with chocolate ice cream yet :-) Works!
Chip tray for watchmakers lathe CZ50, there is a left hand model which fits closely to the headstock, then repeat models which nest together, can print as many of these as you need.
Tailstock holder for CZ50 watchmakers lathe, holds it safely when not in use.
Quick change tool holder for CZ50 watchmaker lathe. One part is a flat holder for the quick change tool holders, the other is a 45 degree angle block which can either rest on the desktop or hook over small French Cleat. Can be remixed to…
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
This is my version of a mount for converting the Zonestar Z5MR2 to use the E3D Cyclops hotend. Prints in 3 parts - no supports needed. I used #4x3/8" sheet metal screws for mounting the parts to each other, and re-used the stock hardware…
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
Milling attachment holder for CZ50 watchmakers lathe, holds it as well as a ER collet wrench and a small number of collets.
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
This mounts my Wansview Home camera on my Taz so I can check on it's progress. I made the top lip separate to make printing easier. Fusion360 files shared below. IP Camera http://a360.co/2xzkJ3S Print Settings Printer Brand: LulzBot…
tailstock camera holder for the CZ50 watchmakers lathe by Michael Chung. This holds the tailstock microscope / camera when not in use. It is designed to be used with a small French cleat system, but can be easily remixed to have fixing…
Great option when your battery door breaks off on your NIKON Z50. Will need to drill hole in appropriate place
Wanted to save space on the desk and actualy was planing on using two...but my design was "too" massive that one is sufficient 🙈😅🤷♂ Wollte Platz auf dem Schreibtisch sparen und eigentlich war der Plan zwei zu drucken....doch mein design…
Milling chip guard for the CZ50 watchmakers lathe by Michael Chung. Goes on the headstock when milling to stop chips going towards the stepper motor.
I created this wiper strip holder for the right side of my Taz5 printer. The printer allows the head to go off the right side of the bed enough that you could wipe you head. As soon as I made this I decided to use a different method to…
A 3D printable case designed specifically for the Samsung Galaxy Z Fold 5 . The FlexGuard ZF5 design focuses on everyday protection while keeping the case slim and usable. It features a geometric reinforced-style back, hinge protection,…
I thought I would see how much an insulated head would effect the heating of my Taz5 Hexhead. I couldn't really tell much improvement in heating from room temp to 240C. I did notice about a 10 percent reduction in the rate of cooling. If…
1:1 replacements for the legs on the Logitech Z506 Subwoofer. You can reuse the original screws to mount them. I recommend printing them with PETG, but feel free to print it with anything you want, the shape is fairly simple. The examples…
Subwoofer electronics into a compact custom enclosure for smaller size, utilizing a 3.5mm jack for an external sub.
I've been doing a build of the simplyRetro z5 and decided to make labeled buttons for it. The original project this is for is the simplyRetro z5 by geaz(found here: https://github.com/geaz/simplyRetro-Z5 ). I printed these with 0.1mm…
Quick change holder for the CZ50 lathe, remixed to fit in a 1x4 gridfinity bin.
Spacer / Socket for RFT Nixie Tubes Z5700M, Z570M, Z5730M, Z573M, Z5740M, Z574M, used in my Nixie Clock project: https://www.maltepoeggel.de/?site=nixieclock-z5700m
The full casing for the Z500. There are 2 versions of the upper casing. One with a window to let the LEDs shine through if using an opaque material. Another without the window if using a transparent material.
I know what you're thinking. "Doesn't the VZ58 have a clip loader directly on the bolt carrier?" Yes, but now you can load clips them directly into your VZ58 magazines. If you've mounted an optic, you're loading magazines at home, or you…
Ремикс вкладыша, чтобы все было под рукой. Рекомендую использовать флешку Стрельца.
A practical 3D-printed replacement for the front hydraulic brake hose guide on motocross and off-road motorcycles. This model is designed for compatible Honda CRF, Honda XR and BSE Z5 motorcycles. It guides the front brake hose along its…
this model this very thin, use a small diameter nozzle and a thin layer hight for good results.
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
If you need a pic-rail-mounted stock, you've got lots of very modern options. But if you want something a bit more classic from back when stocks were whittled from logs or molded from beaver puke, the pickings are slim. So I made this.…
What is that? Intake manifold / carburetor gasket #09 for Honda Z50 Monkey. Fits the original Honda 16100-165-924 carburetor. I printed mine in PETG and the other option in TPU. Both materials are equally suitable. When using TPU, no…
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
Wall mount to hold the attachments that came with my vacuum. Shark Cordless Pro. The hole is sized for a #6 screw and the larger hole is to fit my phillips driver through. Plugs for the large holes after mounting.
perfectly fitten horizontally speaker holder for the z533 from logitech Print Settings Printer Brand: Creality Printer: Ender 3 Category: Audio
Remake of the Z333 volume ring indicator made for the Z533. Printed on a Anycubic cobra 2 MAX
This is a quadrature encoder that can be mounted on the spare hole of the TAZ5-6 extruder stepper. Stick on the pattern and mount with one 3mm screw. This is for my filament length creation but may be of use for other applications. I…
Wall mount to hold the attachments that came with my vacuum. Shark Cordless Pro. The hole is sized for a #6 screw and the larger hole is to fit my phillips driver through. Plugs for the large holes after mounting.
Prodloužená pistolová rukojeť pro VZ58, doporučuji použít PETG/PETG-CF nebo PC/PCCF. Extended pistol grip for VZ58, i reccomend to use PETG/PETG-CF or PC/PCCF. Changelog:
File STL ad alta precisione per la stampa 3D della carena laterale della Kawasaki Z500. Questo modello nasce da un accurato processo di reverse engineering effettuato sul pezzo originale. Le geometrie, gli spessori e, soprattutto, i fori…
This is an enclosure I made in order to house the webcam taken from a Lenovo Ideapad Z580 with a hole so that the camera activity LED can shine through. I also made a sort of clip in order to mount the webcam to a monitor (it's made to…
Finally got a potentiometer to repair my old 4.1 speaker system, but the only one I could find was 20kohm instead of 10kohm and had a knurled knob in the wrong position and decided to share in case anyone else could use. There is a rather…
I wanted a new handle for the blade height adjuster of my new Craftsman mower. It has a 16 mm diameter / 100 mm depth hole down the center. The logos were printed in 2 colors with Cura's "Pause Print" function, then glued to the handle…
The sticker that came on my mower was coming off, plus it was coving the (yet to be installed) hour meter, so I decided to pull the sticker off and design my own 3D printed replacement. There are files for 2 separate pieces, incase your…
-----UPDATE V2 Model sizing is correct now and it works!!----------- The first print I made had 5% infill, normal walls, 0,3 layer height. This was of course not enough, while removing the dock from the print bed I already broke a few…
I remixed this model so it can be printed with less supports than the original. To assemble the model, you will need to glue each part together. The small square hole in the wheels is off-center and should be facing downward. To attach…
