Creality Falcon2 Pro - Shelf Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality Falcon2 Pro - Shelf Brackets
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket that can be used to build a shelf that sits on top of your Creality Falcon2 Pro enclosure to provide some extra room for a laptop or the like.
Two files - one with holes for rubber feet, one without. Choose correctly before printing! The one without has shorter sides so it does not hit the hex screws. The rubber feet add about 2mm under the bracket.
I prefer the one with rubber feet so this shelf does not shift.
Print two as oriented. I printed in PETG with 3 perimeters.
I used #6 wood screws to secure my piece of ½" pine to it.
Board Width 565mm / 22 ¼"
Board Depth - 200mm / 8" minimum to match bracket depth
I used ½" wood from Home Depot.
Cutting - if you don't have the means to cut this wood, Home Depot will cut any wood you purchase! Just ask and they can cut down the piece you purchase to the size you need.
Why so many holes? If a user wants to use multiple smaller pieces of wood(which would look pretty cool) instead of one large slab, there are screw holes to support this.