MULTI-TOOL ___ Slide Return Bolt-Action and T-Pull Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy slide return mod with double sided bolts for bolt-action and T-pull prime for the MULTI-TOOL
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy slide return mod with double sided bolts for bolt-action and T-pull prime
for the Multi-Tool.
- added larger both sided bolts directly to the slide block
(needs one M3 Screw 20-25mm long / OR two M3x10mm screws if you screw from both sides) - added a retention to the magwell riser to attach some rubberbands for slide return
(2 to 3 household rubberbands) - designed a picatinny rail delete for the magwell riser to not scratch the hand with the pica rail during bolt-action or T-pull prime.
- reduced the height of the Caliburn Sights (which are great for aiming over the magwell riser)
Other mods for the Multi-Tool as seen in the pictures can be downloaded here.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill (60% infill for the bolts)
7 top and bottom shell layers
No supports needed.
Thanks to Chris Doughty and captainslug for the files I could use for this remix.
You can purchase the files for the Multi-Tool from Chris Doughty's Etsy shop.