1 / 5
MULTI-TOOL ___ Slide Return Bolt-Action and T-Pull Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy slide return mod with double sided bolts for bolt-action and T-pull prime for the MULTI-TOOL
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 1
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy slide return mod with double sided bolts for bolt-action and T-pull prime
for the Multi-Tool.
- added larger both sided bolts directly to the slide block
(needs one M3 Screw 20-25mm long / OR two M3x10mm screws if you screw from both sides) - added a retention to the magwell riser to attach some rubberbands for slide return
(2 to 3 household rubberbands) - designed a picatinny rail delete for the magwell riser to not scratch the hand with the pica rail during bolt-action or T-pull prime.
- reduced the height of the Caliburn Sights (which are great for aiming over the magwell riser)
Other mods for the Multi-Tool as seen in the pictures can be downloaded here.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill (60% infill for the bolts)
7 top and bottom shell layers
No supports needed.
Thanks to Chris Doughty and captainslug for the files I could use for this remix.
You can purchase the files for the Multi-Tool from Chris Doughty's Etsy shop.