1 / 1
Prusa Roller Filament holder with 608 bearings for 2kg spools — zdjęcie 1

Prusa Roller Filament holder with 608 bearings for 2kg spools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Prusa Roller XL is a filament unwinding tool espesially designed for 2kg filament spools.

Ocena
5 / 5
Polubienia
5
Pobrania
85
Wydruki
0
Wyświetlenia
515
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Prusa Roller XL is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa Roller XL was that my Prusa i3 Mk3s stands in an enclosure and changing filament using the original spool holder was very uncomfortable. With the Prusa Roller XL, the filament can now stand outside the housing and is only fed through from above. Another reason why I am not a fan of the original holder is that the heavy load of the spool always weighed down the whole printer.

The whole Prusa Roller XL is easy to print and does not need any supports. Please print the rollers vertically as shown in the picture with the 2 grooves facing down.

To assemble the Prusa Roller you need the 2 rollers, the base plate and 4 more 608  ball bearings. I used cheap 608 ZZ bearings but other 608 should also fit.

I would be very happy about a rating, a like or a make from you. Otherwise, have fun with my Prusa Roller and Happy Printing.

 

Tagi