Din Rail Amperemeter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just an use case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This case can be mounted on a DIN rail and holds an amperemeter gauge (like the HKS-VA028_V2.0) and the complemeting shunt resistor. This case can take the big 100A and also the smaler 60A shunt. .step available too for you to modify
Printing:
Print all parts in the given orientation. No support needed. It is recommended to use a material which can tolerate higher temperatures, since the shunt might get a little warm with high loads.
Assembly:
Put all parts together like seen on the pictures below. The shunt is bolted down with fitting bolts of your choice. The cover and also the DIN rail clamps are be mounted with M3 bolts or similar.
