Forney Tank Locomotive (G Scale)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A medium sized tank engine in G-Scale/Gauge 1! "I. Am. Not. A. Tender engine!!" - Every forney, probably.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 226
- Wydruki
- 2
- Wyświetlenia
- 1253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Update August 2, 2025: Model tested & finished!
Here's my biggest (Published) model yet! Coming in at 43 parts, and over a foot long, this is one hefty train ready to haul!
This is R1 compatible! Surprise, I know. There's a lot of rear overhang, but there isn't really a good way to circumvent it.
Several parts are not in the intended orientation, so you'll have to bed them yourself. Bedding & special instructions are in the notes for each part.
This is not motorized yet! I'm working on motorization for it, and that'll be posted later as a remix. (For now, use an engine on the rear to push - Make sure the couplers are actually usable for pushing!)
I highly recommend pairing with my coaches!
Proudly designed in Tinkercad & made in Canada
|| THE BOILER NEEDS SUPPORTS ||
(The cab roof may also benefit from supports, but not strictly necessary)
Assembly instructions on Youtube! \/
[Video not made - Coming soon]
|| Hardware required ||
- Screws (Many different kinds, but all screw-holes are modelled as 2.8mm diameter - I salvage off broken locomotives/rolling stock)
- Glue (I use Gorilla Glue Clear Grip contact adhesive)
- 2x freight car wheels (I use HLW ones for better R1 handling. The oversized flange helps it to track through switches better when pushed)
|| Optional hardware! ||
- Paint is optional but highly recommended!
- One Kadee 830/930 coupler for the rear. I highly recommend if you're pushing the loco!