Voron 2.4 Bottom Panel Magnetic Clips - Modified Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly altered the fit and sizing to avoid the press fit from visibly deforming the parts.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 85
- Wydruki
- 5
- Wyświetlenia
- 394
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Adjusted the sizing of both the magnet holes themselves and the overall dimensions to give s bit more plastic around the magnet holes so that when pressing in the magnets the edges don't visibly bulge. Photo shows the original (left) and the remix (right). The white stress marks is where the part is bulging from the tight fit. I suspect this is due to variances in printers and the brand of the magnets. Even with a well calibrated printer, the magnets may be slightly oversized. The fitment on the skirts and panel is un-affected.