Motorcycle Helmet Hook (head shaped, kind of)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motorcycle Helmet Hook (head shaped, kind of)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I needed a way to keep my helmet at home and at work secure, and keep from getting knocked on the ground.
I measured the interior of my helmet and came up with this custom shape. It mimics the back of your skull. Supports the helmet by the back of the interior. I wanted a unique mounting solution, and I think this may be it.
Helmet basically sits on this on the wall with visor section down towards the floor.
Printing setup.
Material used - 3D Fuel Pro PCTG (re-Fueled)
Bottom layers - 5
Top layers - 5
Vertical layers - 5
Infill - 10% Gyroid.
Here is my alternate mounting solution using a Tough Hook Hanger.
https://www.printables.com/model/1359961-tough-hook-mount-to-motorcycle-helmet-hook
Rendering with single SS Tapered Heat-Set insert.
MISC hardware ordered from McMaster CARR.
Parts listed below.
QNTY 6 - 18-8 Stainless Steel Tapered Heat-Set Insert for Plastic
M5 x 0.8 mm Thread Size, 11.1 mm Installed Length (PN-97163A163)
https://www.mcmaster.com/97163A163/
QNTY 3 - 18-8 Stainless Steel Socket Head Screw
M5 x 0.8 mm Thread, 50 mm Long (PN-91292A196)
https://www.mcmaster.com/91292A196/
QNTY 2 - 18-8 Stainless Steel Socket Head Screw
M5 x 0.8 mm Thread, 25 mm Long (PN-91292A129)
https://www.mcmaster.com/91292A129/
QNTY 1 - 18-8 Stainless Steel Socket Head Screw
M5 x 0.8 mm Thread, 16 mm Long (PN-91292A126)
https://www.mcmaster.com/91292A126/