Liczymy pasujące modele…
I wanted to store my film somewhat organised. I couldn't find a holder design I liked, so I made my own. Printed with PLA 0.2mm. You can edit the OpenSCAD file to change the layout and size. https://ko-fi.com/spacehuhn
A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…
The Pixl-latr is a simple and inexpensive film holder that diffuses backlight allowing you to digitise your negatives or slides using a DSLR (https://www.pixl-latr.com/). I wanted to use the Pixl-latr with a Godox LEDP120C led panel. This…
This hanger fits into a peg board with 1" spacing. It has hooks for the tank, the lid, and the lid cap. Very specific, I know, but hopefully someone else finds this useful.
Version 3 (03/22/2026) It's everyone's favorite Eridian! Based off of the blockbuster film Project Hail Mary adapted from the Andy Weir Novel. Print the quantity specified in the file name, the hands are your choice. Print with ASA or…
A simple, easy-to-print, retro-style 35mm film holder for DSLR scanning or negative viewing. The included registration posts make it easy to align when gluing and assembling. Please post your make. Enjoy File "35mm_Film_Holder_NG.stl" has…
Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Introduction This is a functional print that helps you finally digitize those 35mm film negatives - old family photos and recently developed rolls alike. The main component consists of a frame with a print in place mechanism for advancing…
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Baking Paper / Cling Film / Aluminum Foil boxes holder for the kitchen. It fits <5cm rolls, <6.5cm and <7cm depending on the variant. There are two variant Short without floor Long with floor Both have holes to use a screw or they can be…
I tried the other available models in my camera, but they were far too large to allow the door to close. I also noted that the bottom portion of the cartridge had a raised section (to mirror the top) which seemed to be unecessary in the…
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
3-Piece adapter set to allow the use of 35mm film in a medium format camera. It includes the top and bottom adapters for a 35mm film roll, as well as a take-up spool. This set allows you to expose the sprocket holes on 35mm film for an…
After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…
The easiest way to start camera scanning. Do you have boxes of old negatives that you've been wanting to preserve but never got around to it? Are you tired of outdated, slow flatbed film scanners that take hours to scan a few rolls of…
Adapter that allows you to load 35mm film into a medium format camera. With this adapter you can take amazing panoramic photos and expose the full width of the film not just the frame between perforations. If you print two you can add…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
This is an easy-loading reel for developing up to 6 sheets of 4x5 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…
Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…
I made these 120 film cases and thought I'd share them with you. There are two variants with space for 3 or 5 rolls. Both the container and lid are chamfered to avoid an elephant foot. The tolerances for the lid have been tested and…
Thank you all for the kind messages! Can't wait to see your images, please tag them in social media #ligero69 where possible. Much love! ……… Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required…
Due to the Heatplate in my DUAL Filament Dryer from Sovol 3D, I made a StandOff for the DryBox. The StandOff has a 20 mm height, to make sure that the Dryer has enough clearance for ventilation. Share your make, that makes me more happy…
This film carrier provides great film flatness and smooth film feeding action while being quick to print and easy to assemble. This design is my attempt to improve on existing 3D printed film carrier designs, focusing on film flatness and…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.
Just a simple a tool for people that bulk load a lot o film and want consistent and nice leader cuts. There is also a template for cut square. All my designs are Open-Source so fell free to edit, mod or remix as you like. If you find this…
This is a convenient and easy way to carry and store your 35mm film rolls. On the go or in the fridge (or on the self, you sick sick, uncaring soul!), this holder is perfect. It protects from the elements (sun, moisture, extreme heat and…
Wilma, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. Wilma was…
Version 2 Overview Easy-to-make version. All parts have completely flat bottom surface. Also I checked necessary clearances, added place for velvet strip in the gate gap and made separate details for using it with thin 0.5mm metal or…
Hi all! I was able to manage getting my MK3S to print decently sized lenticular film. The basic premise is to get as flat a vase mode as you can with clear PLA. You may have to play with it to get it to play nice, as flat vase mode tends…
The Office Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.: 17.5cm x…
I made these 135 film cases and thought I'd share them. Just like my medium format (120) film cases, these come also as a 3 and 5 roll size option. The lid is symmetrical so it fits in either orientation and the registration pins hold it…
FilmPod 35mm - Stylish, Secure 35mm Film Travel Case (Print-in-place - 4x 6x3mm magnets required) Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world of…
Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.
I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.
Minolta Camera 16mm Film Cartridge Printer: Bambu P1P Nozzle: 0.4 Profile: 0.12mm Fine @BBL P1P Filament: Overture PLA, Black Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained.…
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
This is a cassette for the Minox (and others that use the same cassette) cameras. Print instructions It requires a 0.25 or smaller nozzle at .10mm DETAIL setting and thin wall detection.
I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…
Do you still have some strips of 110 film that were used in pocket cameras back in the 1970s and 1980s? And do you have a Plustek OpticFilm scanner? This is a film holder for 110 films. Just place the film strip into the holder, put the…
Introducing the Polaroid 600 film to Spectra adapter, a functional 3D-printed model that enables the use of Polaroid 600 film with Spectra cameras. This adapter provides an exciting opportunity to experiment with 600 film formats on…
This is geared manual winder for 8mm or 16mm cine film. It is designed to attach to the end of a 2020 aluminium extrusion, or can be screwed down to a piece of wood using the 3d printed stand. It can be used for rewinding film after…
This is a 35mm Film Canister Replacement. ******************************************************************************** ATTENTION There is an STL File of the Canister that Works Better with TPU it is labeled: ( Film Canister FOR TPU…
## Design Concept This model features Tom, a meme-inspired lizard character from the upcoming 2026 film "Jumpers." Known for its expressive posture and humorous appeal, it's crafted to capture Tom's playful essence. ## Intended Use…
I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
Box with printed saw for various kitchen foils/films . Multiple variants.
Do you like it? Please consider to buy me a cup cup of coffee . That would make my day! UPDATES 2023-05-05 Do you want to replace the cap with a shutter? Then have a look at Thomas1234 shutter:…
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Holds up to 8 4x5 film sheets.
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
I picked up an 8mm film projector once and it came with one spool and no film, i modeled this off the existing spool so the thing would look complete, hope you all enjoy Category: Camera
Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.
A simple printable slide holder which conforms to DIN-108. They should be compatible with any slide projector or scanner. I use these slide mounts to mount difficult frames for digitizing in a Nikon Coolscan V. Slides can get hot. If you…
Minecraft filmindeki lalalatavuk chichichichicken şarkısının müzikal hali ve aynı zamanda fidget
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
This is a convenient and easy way to carry and store your 120 film rolls. On the go, in the fridge, or on the self (you sick sick, uncaring soul!), this holder is perfect. It protects from the elements (sun, moisture, extreme heat and…
ANYCUBIC Photon D2, Mono, Photon Mono 4K,Photon Ultra, 2pcs FEP Film frame. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Notes: I used some small supports only for screw…
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
This is a film camera with modular design - cassette (film back), focusing screen, lens unit and misc accessories are detachable from the main body for customization, adjustments, movements and portability. It shoots panoramic photos on…
Recreate a piece of movie magic with this 3D printed Happy Gilmore 2 golf ball prop – featuring a hidden compartment just like in the film! Designed for display or cosplay, this novelty item adds a fun talking point to any collection. The…
Print in black, and with all perimeters (instead of infill) to be light-tight. The bottom or top is a prime spot for some embossing! My own has my initials at a depth of 0.3mm. Unfortunately I never got around to designing a hinge…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
I always wanted to share the original film processor that I created years ago... Its design was clunky and difficult to build, I finally found the time to simplify it making it easy to print and easy to build. Here are the files :) I also…
If your camera doesn't have any means to rewind the film once you've finished shooting a roll, this can help you spend less time fumbling with the canister in the film changing bag. Print in the orientation the .stl files are in, layer…
Useful for recording movie scenes.
LEICA style lens hood for fujifilm XF23 f2
Use M4x10 flat head screws, such as https://www.mcmaster.com/91294A190/ It works best if you tap the holes with an M4 tap, but you can also assemble the screws directly into the plastic. Dimensions of film opening: 57mm x 85mm (height vs.…
Have you ever wanted to Have the Happy Gilmore Putter but don't want to pay thousands of dollars to get it used? Well do I have a solution for you, here is the real life Happy Gilmore Putter that is scaled up properly to the REAL SIZE and…
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
Holding frames to convert analog film media with a (D)SLR Get your beloved media to the digital age. Stuff you need: SLR Macro lens Flash (recommended) These parts are optimized to get the highest possible conversion quality. The lens…
I looked at all the available options (free and expensive) and tried to implement things that I thought were missing in this design. I wanna be able to print faster than some available options and also more modular So the main part would…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
pz35 Want to scan your negatives but you don't want to go to a lab? Looked at flatbed scanners or other DSLR scan solutions but got discouraged by the price? I've got the project just for you! It's cheap! It's easy to assemble! It's easy…
slight remix (just organised per plate) of original for Box and cutter for various kitchen foils/films . Sizes organised per plat for 330mm and 390mm depending on what size you need
A Polaroid Film Case for i-Type & 600 Film - your perfect on-the-go companion to protect your precious photos, keeping them secure in the dark wherever your adventures take you! The case features 8 precisely-sized slots, perfectly…
Wilma Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Wilma Flintstone based on my multi-part Wilma Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz…
New version: Uses less material to print, but requires supports. Only takes 4 sheets, but sticking together isn't a problem. Drying area and hole is much bigger, corners dry more quickly than older version! Older version: Takes 8 sheets,…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
A dimensionally accurate model of an 35mm photographic film cartridge. The only thing lacking is the “lugs” that the camera engages on to wind the film back into the cartridge. I decided to omit them to allow this to be safely inserted…
Simple 8mm film reel. I modeled it after the autoloading reel that came with my projector. I cannot guarantee compatibility with other models of projectors, but I attached an editable .step file so the model can be easily remixed. The…
**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.
This is a remix of the original 35mm Film Case with 35mm text engraved into the lid. That way, one can distinguish the boxes, in case one has multiple versions of the rugged box design. I print my rugged boxes with PLA and the latches…
September 2025 - V2.2 - added a boolean flag to the VarSet in the FreeCAD model to allow for winder spindles that have a square section throughout. V2.1 - made the core thickness parametric to cater for 35mm and 8mm film cores. Uploaded…
This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
I use this holder to manage full rolls of 35mm film while scanning. The film is kept in line by a small ledge that only contacts the sprocket area. The image area does not come into contact with the part, so it will not be scratched.
Reverse engineered JJC TA-XPRO3 grip, not the exact same dimensions but very similar. If someone needs a more FDM friendly version, just write me.
A simple tool to to help re-spool 120 film onto 620 spools for vintage and antique cameras. Prints all at once, just attach the top strap using a couple M3 screws. Printed in Matterhackers build series PLA at 220c, .3mm layer height and…
I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…
This is a replacement part for the film door latch of the Canon EOS 50/50e. It is modelled after the original part that broke (view images). I printed it in PLA. Might need some sanding afterwards because it is a very thin part and can…
These are a 3D printed set of film drying clips for use in your darkroom, these clips are perfectly sized for 35mm/120 film These clips let you hang up your film up to dry after processing. no more wooden cloths pins or metal binder…
Printed with no top and bottom layers and 15% gyroid infill.
Lens cap for fujifilm G (GFX) system based on the original cap. No supports needed. I use PETG with 0.4 nozzle 0.2 layer but PLA should also works. I also printed this on resin printer and also fits great.
35mm film adapter parts for Mamiya RZ67. I use the 220 film backs for this. Tested with Kodak and Ilford cartidges. You can use the included uptake spools or spool into a second film cartridge. Printed in PETG with a 0.6mm nozzle at 0.2mm…
This film case will hold 4 rolls of 35mm film with a tight fitting top that clicks into place. Print the top and bottom in separate colors for added creativity.
I found myself working on another project that needed a hand crank for a 35mm film canister and started working on one. This is a variation of that, which works really well as a stand-alone simple machine for winding up those 35mm films.…
Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.
