handrail handle for antenna and other stuff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adjust the angle of your antenna and other hanged stuff
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal was simple. Adjust my cpe wifi antenna (tenda o3) on balcony rails and aim it in the right direction. It works so I'm pasting my project with photos here.
ofc it's not the only one application for this shit. If you want to hang other stuff like bird feeder or Christmas decor feel free to do it ;)
Print with use of UV resistant materials (ASA/PETG) and AVOID PLA!
PLA is pure evil for such constructions. Good stiffness quickly fades away, over time the material bends and cracks.
You will need 3x m5 screws with washers
In my examples I used PETG from fiberlogy (all of their materials are quiet good)