Picatinny Cover -- Rear Sight Insert -- Dart Zone Pro MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picatinny Cover (--> Color Accent) -- Rear Sight Insert -- Dart Zone Pro MK2
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Picatinny Cover (--> Color Accent) -- Rear Sight Insert -- Dart Zone Pro MK2
I wanted to add a little extra black detail to the rather dull-looking MK2, so I made a Picatinny cover that simply slides on and is secured with a printed pin.
I think the blaster looks a bit more interesting this way.
UPDATE 29.11.2025:
Added a small insert for the rear sight to create a line of sight parallel to the barrel. For plinking at short distances, simply ignore the much too wide and tall stock rear sight and aim using this insert.
----------------------------------------------------------------------
The files are already pre-oriented.
It needs approx. 13g of filament.
My print settings for PLA:
0,2mm layer height
4 walls
7 top and bottom shell layers
15-20% gyroid or cubic infill
(print the picatinny cover with outer brim if you have poor bed adhesion)