Bouncing Eyeball with Hat – Halloween Spring Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun 3D printable eyeball with a hat, mounted on a spring — perfect as a spooky Halloween decoration!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This playful model features a round eyeball with a hat, sitting on a spring base that lets it bounce or wobble.
Designed as a lighthearted Halloween decoration, it can also be a fun desk toy.
- The model is split into multiple parts for easy printing and color customization:
- The hat attaches to the eyeball using small pins (you can use standard 1.75 mm filament as the connector).
- The spring fits into a groove at the bottom of the eye — two spring variants are included (standard and loose fit).
You can print the eyeball and lens separately to combine different colors, or print the eyeball as a single piece. When printed separately, the lens should be glued to the eyeball using a small amount of super glue (cyanoacrylate) or similar adhesive.
- Printing tips:
- Layer height: 0.20-0.25 mm
- Perimeters: 2-3
- Infill:
- For spring 80-90%
- For hat and eyeball 2%-5% (print with minimal infill due to spring stress)
No supports needed, except for the spring — print it with supports (preferably snug or “touching buildplate”).
This model is fun to assemble, and adds a nice bouncing twist to your Halloween decor! 👁🎩
//If the spring can’t support the eyeball and it tips over, try shortening the spring by a few coils. But with the provided settings, everything should work just fine.
//Added spring with less revs. for better stability