V-Slot 2020 External Corner Connector (L-Bracket)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External 90° connector for 2020 V-slot profiles. Joins two extrusions at a corner without overlap or screws.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 216
- Wydruki
- 2
- Wyświetlenia
- 570
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is an external L-shaped corner connector for 20x20 V-slot aluminum extrusion profiles.
It joins two profiles at a 90-degree angle from the outside, keeping the interior of the corner open — perfect for clean frame geometry, panels, or enclosure corners.
The connector slides or snaps into the adjacent profiles’ ends, holding them together without the need for screws or T-nuts.
It’s strong enough for lightweight to moderate structures such as printer frames, LED boxes, or panel corners.
✅ Features
Designed for V-slot / OpenBuilds 2020 profiles
External corner bracket – joins two profiles at 90°
Clean open interior corner (profiles don’t overlap)
Snap-fit / friction-fit design – no hardware required
Smooth outer faces for mounting panels or covers
Printable flat on the bed, no supports needed
🧰 Applications
Frame corners for enclosures or printers
LED or acrylic panel frames
CNC / laser chassis corners
Lightweight mechanical structures
🛠 Recommended Print Settings
Material: PETG or ABS (for toughness), PLA for prototypes
Layer Height: 0.2 mm
Infill: 40–100 % (depending on strength needs)
Supports: Not required
Orientation: Print flat
📏 Compatibility
V-Slot 2020 aluminum extrusion
Also fits most 20×20 T-slot profiles