IKEA SKÅDIS Bottom Mount Holder for Small Ladders (250 mm Width)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching small ladders to the bottom edge of a IKEA SKÅDIS board. Requires solid wall mounting.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 40
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This holder is designed to attach under the bottom edge of an IKEA SKÅDIS board, allowing you to hang a small ladder (or even a slightly larger one, depending on your setup). It replaces the original SKÅDIS spacers at the bottom.
⚠ Important: During printing, you’ll need to insert a pause at the nut position to place the M5 hex nuts into the print before resuming. The nuts are embedded directly and provide a strong metal thread for reliable fastening.
Please ensure your SKÅDIS board is securely mounted to the wall, as a ladder can be relatively heavy. The board and its installation must be able to carry the load safely.
The holder is 250 mm wide and works with M5 countersunk screws (length can vary). I used regular M5 nuts I had on hand, but I may create a future version for heat-set inserts as an alternative.
I’m also considering a variant with additional wall anchor holes to support both the holder and the SKÅDIS board more directly — ideal if you plan to mount heavier items.