STREACOM DA2 – Configurable 3D Printable Side Panels & Dust Filters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Configurable 3D printable side panels & airflow grilles for STREACOM DA2 using slicer infill patterns
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
This model provides 3D printable side panels and ventilation grilles (dust filters) for the STREACOM DA2 Mini-ITX case.
The key concept of this design is full configurability through the slicer infill pattern.
There is no fixed ventilation geometry – the final airflow structure, visual appearance, and rigidity of the panels are defined entirely by the chosen infill pattern in your slicer.
This allows you to tailor the panels precisely to your build requirements, whether you prioritize maximum airflow, structural stiffness, or a specific aesthetic.
All parts are designed for perfect fitment and can be installed exactly like the original STREACOM panels, without any modifications.
Key Features
Customizable side panels and ventilation grilles for STREACOM DA2
Panel structure defined by slicer infill pattern
No predefined hole or mesh design
Airflow, rigidity, and appearance fully configurable
Plug-and-play installation
Designed for high-temperature PC environments
Clean, minimal design suitable for SFF and high-end builds
Printing Instructions (Important)
To achieve the intended functionality and appearance, please follow these settings carefully:
Top layers: 0
Bottom layers: 0
Wall / Perimeter count: 20
Infill: User defined
This determines the ventilation pattern
Examples: Honeycomb, Gyroid, Grid, Triangle, etc.
Layer height: User preference (e.g. 0.2 mm)
The infill pattern effectively becomes the visible panel structure.
Recommended Materials
Due to elevated temperatures inside PC cases, temperature-resistant materials are mandatory:
ABS
PETG-CF
Comparable high-temperature filaments
PLA is not recommended.
Print Bed Requirements
Minimum print bed size: 300 × 350 mm
Panels are designed for single-piece printing
Installation
Installs exactly like the original STREACOM DA2 panels
No case modification required
No additional hardware needed
Compatibility
✔ STREACOM DA2 Mini-ITX Case