Universal Workbench to Wood Post Mount for Privacy Screen (40 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3-part bracket system to mount 40 mm wood posts on workbench backsplashes for balcony and terrace privacy screens.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a robust 3-part mounting system to securely attach 40 mm wide wooden posts to stainless steel workbenches with a rear upstand or backsplash, including Royal Catering models and similar work tables. The design tolerates varying post depths as long as the width is 40 mm, making it suitable for many standard timber posts. No drilling or permanent modification to the workbench is required – the brackets simply clamp onto the existing backsplash edge.
Installation is simple: first mount the bottom hook (Part 1) and the middle bracket (Part 2) to the workbench edge, then hold the wooden post against the back of the workbench and screw on the top part (Part 3). This creates a very stable connection so the workbench can be extended into an outdoor privacy or wind screen for balconies and terraces.
Print Settings
Parts 1 (Bottom Hook) and 3 (Top Clamp): These parts bear the main structural load and should be printed relatively solid with high infill (recommended 50-80%). Pay close attention to print orientation to ensure layer lines run in the direction of maximum strength.
Part 2 (Middle Bracket): This part has no special requirements and can be printed with standard settings.
Recommended material: PETG for outdoor use. The system has been used outdoors for more than one year, showing no noticeable wear or degradation.