1 / 4
FumeClear 3 inch hose adapter lid FC-2001S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new lid for FumeClear FC-2001S so it can take a 3 inch hose.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
2 Versions of this lid.
The version with the fins only has them for the purpose of making the hose coupler stronger so it doesn't break as easy when using a hose clamp on it while keeping air resistance to a minimum.
Best way to print is at 45 degree angle
If you find it difficult / tight to install this part just lineup 3 corners and lightly slap in the 4th.
3 Inch hoses -
3 Inch Ducting hose (Cheap, Not very strong, Super easy to tear aluminum)
3 Inch Dust Collection hose (More expensive, Durable, Thick PVC Rubber)
Tagi
3dprintprinterliddfumeprinted3dprintingmodel3dprintablefreefanadapterhobbyprintinghobbies33dprinterstlprintableductventilationventhomemade3dprintedcrafthoseexhaust3dmodelinchcreative3dprintfinfilefumeextractorcraftingductinghoseadapterclearexhaustfanfdmfumesobjexhaustductfinstoxicexhaustventamsstlfilefumeclearasmobjfile