1 / 2
Kawasaki ZX-4R Seat Trim 3D scan COVER-TAIL,CNT 36042-0012 — zdjęcie 1
1 / 2

Kawasaki ZX-4R Seat Trim 3D scan COVER-TAIL,CNT 36042-0012

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A laser scan of my ZX-4R's seat trim that connects the two seats.

Ocena
0 / 5
Polubienia
4
Pobrania
32
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use the model to print your own replacement parts. Some areas of the part, such as the tabs, may not be dimensionally accurate as the scanner cannot scan within tight pockets. I have attempted to alleviate these issues as best I could in Blender by manually sculpting the edges. 

This model was an absolute pain in the a** to scan as the part is both thin and flexible, resulting in the scans being misaligned during the merging process and the scanner losing tracking, but I managed to get a decent one-piece scan using the markers listed here, and some post-processing in CloudCompare.

COVER-TAIL,CNT
36042-0012

https://www.partzilla.com/catalog/kawasaki/motorcycle/2024/ninja-zx-4r-abs-zx400prfnl/side-covers-chain-cover

The other models shown can be found at the links below.

If there are any issues, please let me know.

Tagi