Silica gel humidity box with smaller holes - no beads escape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unlike other containers with oversized slits that let 2mm beads slip through, this model features smaller holes
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 2
- Wyświetlenia
- 145
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried other solutions to keep silica gel beads in their containers, but most of them had slits that were way too big for smaller beads (1–2mm). The result? Beads escaping onto the floor.
This humidity box was designed specifically to solve that problem.
Unlike other containers with oversized slits that let 2mm beads slip through, this model features 0.7mm holes; small enough to trap even the tiniest beads while still allowing plenty of airflow for effective moisture absorption.
0.7mm Holes: No more escaped beads. Your smallest silica gel stays put.
Press-Fit Sliding Lid: Made for a snug, secure fit. Shake it, tip it, drop it in a drawer—the lid stays closed thanks to small beads modeled into the lid, just make sure you have that side towards the exterior side
Small size: 100mm (perfect for tight spaces like tool drawers)
Large size: 190mm (ideal for filament storage boxes or larger enclosures)
For printing:
No Supports Needed: All parts print flat on the bed.
Decent Tolerances: Designed with generous clearances. If your printer is half-decently calibrated, this will fit together perfectly.
Layer Height: 0.2mm for crisp hole definition.
Nozzle: 0.4mm, realistically, no matter what u use, you should be good
Basically:
Print the box body and lid for your desired size.
Fill the cavity with silica gel beads (any size).
Slide the lid into place until it clicks.
Place in filament storage boxes, camera cases, tool drawers, or any space needing humidity control.
When beads are saturated, open the lid, dry them (there are methods online for drying and reusing them), or replace them.
If you like the design, please leave a make! I would love to see it