1 / 6
MARTIN - Ender 3 V3 SE/KE Toolhead upgrade [5020 Fan version] — zdjęcie 1
1 / 6

MARTIN - Ender 3 V3 SE/KE Toolhead upgrade [5020 Fan version]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An upgrade meant to replace the original fans with more powerful ones

Ocena
0 / 5
Polubienia
8
Pobrania
22
Wydruki
0
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

MARTIN - Ender 3 V3 SE/KE Toolhead upgrade [5020 Fan version]

Uses this adapter for the hotend fan:

Parts for FatMartin :

  • x2  5020 blower fans (24V)

  • x1  4020 axial fan (24V)

  • x8  m3x30 screws / m3x25 screws

  • x8  m3x10 screws

Parts for TurboMartin:

  • x2  5020 blower fans (24V)

  • x1  4020 axial fan (24V)

  • x8  m3x30 screws / m3x25 screws

  • x4  m3x10 screws

  • x2 m3x8 screws

Print settings:

  • Layer height : 0.1mm - 0.2mm

  • Line width : (OrcaSlicer default)

  • Wall loops : 2 - 3

  • Top/Bottom shells : 4

  • Sparse infill density : 5% - 10%

  • Enable support : yes

  • Support type : tree

  • Elephant foot compensation : 0.2mm

  • Recommended filament type : PETG

  • The rest is up to you

Happy printing!

Assembly:

For FatMartin:

For TurboMartin:

NOTE : This is a first version of the project, I'll need feedback for further improvement

Tagi