DIN Rail Mount for Tenda SG105 Network Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple DIN rail mount for the Tenda SG105 network switch. Designed for clean installation inside electrical cabinets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Description
This is a custom DIN rail mount made for the Tenda SG105 network switch.
The mount allows the switch to be installed neatly inside an electrical cabinet, control panel, server box or any other DIN rail based setup. It is useful when the switch is used for PLC, HMI, servo drive, router or general network communication inside an automation project.
The design is simple, compact and easy to print. The switch can be fixed into the holder and the whole assembly can then be mounted onto a standard DIN rail.
Main features
• Designed for Tenda SG105 network switch
• Suitable for DIN rail installation
• Useful for electrical cabinets and automation panels
• Compact design
• Easy to print
• Good for PLC, HMI and industrial network setups
Print settings
Material: PETG recommended, PLA also works
Layer height: 0.2 mm
Infill: 20 percent to 40 percent
Walls: 2
Supports: Yes, automatic normal
Print orientation: Place the flat back side on the build plate
Notes
PETG is recommended if the mount will be used inside an electrical cabinet, especially where temperatures are higher.