7mm to 9.5mm HDD SSD Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to use a 7mm thick 2.5" HDD or SSD in a device which expects a 9.5mm thick one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Newer 2.5" HDDs and the vast majority of 2.5" SSDs have a 7mm thickness. Some devices expect a 9.5mm thick drive however. This simple spacer allows you to use a 7mm drive in those devices. It is quick to print and, as it's one continuous shape, your printer doesn't have to draw a bunch of circles on the bed so there's less chance of something coming unstuck and ruining the print.
- PLA, PETG or ABS
- 0.2mm layer height
- 20% infill
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.