Universal DIY Insect Screen Door Frame System – Modular Connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clever and cost-effective modular system for DIY insect screen installation on balcony or terrace doors, utilizing pri
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This project enables you to build a sturdy and perfectly fitted insect screen frame for your home without purchasing expensive, pre-made aluminum profiles. The structure relies on widely available plastic or electrical conduits joined together by custom 3D-printed parts.
Save money and make your own mosquito net for your balcony door. The components are very inexpensive – the tubes are very cheap. I used a curtain as the mesh, plus four metal screws cut to 27/28 mm.
The system consists of:
• Reinforced Corners: Right-angle connectors featuring an integrated gusset/brace to ensure maximum rigidity of the frame.
• Mounting / Spacer Blocks: Bottom and top positioning blocks that keep the structure perfectly aligned with the door frame.
• Securing Clips: Small snap-on clamps that hold the mesh firmly in place along the tubes.
Assembly Tips: Components can be secured with small screws for extra durability, and the net is tensioned and locked using the provided clips. Printing in weather-resistant materials like PETG or ASA is highly recommended.
The installation was carried out using a socketed RLM 20/2 m electrical installation pipe - it has a diameter of 22 mm on one side and 24 mm on the other. It can be easily cut to the size of the balcony door.