1 / 3
Desiccant Fan Tower (120mm AC Infinity MULTIFAN S7-P) (Parametric) — zdjęcie 1
1 / 3

Desiccant Fan Tower (120mm AC Infinity MULTIFAN S7-P) (Parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,19 € – 0,23 € netto (bez VAT)

Dla pliku: Desiccant Fan Tower (Large)_0.4n_0.25mm_PLA_COREONEL_8m_bed2.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,21 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
8,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A desiccant tower that mounts a 120mm fan on top to draw air through and circulate air in your dry box.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Desiccant Fan Tower (120mm Fan)

Pull air through your desiccant in your dry box and circulate dry air.

Hardware

Print Settings

  • PLA

  • 0.25mm layer height

  • No supports

  • I recommend a brim, especially for the feet

Assembly

Choose a tower size to print, print the associated feet then simply glue them on the bottom in the corners. Remove the rubber gaskets and screws from the backside of your fan and drop it on top.

Photos printed with Prusament PLA Azure Blue

Tagi