Heavy Duty Corner Bracket For 2040 / 4040 Extrusion M3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stronger 2040 corner Bracket for use in Extrusion along with T-nuts
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 2
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heavy Duty 2040 Corner Brackets for CoreXY & Custom Builds
A significantly stronger alternative to standard 2040 corner brackets. Designed with a thick center gusset to eliminate flex and withstand high-speed CoreXY vibrations. Perfect for Hypercube, Voron mods, or custom aluminum extrusion frames.
Includes two versions:
4-Hole Version: For standard rigid joints.
8-Hole Version: For absolute maximum rigidity on critical frame corners. (i recommand using only 4screw and nuts for it though in an asymetrical way as it is kinda overkill)
Recommended Print Settings:
Material: PETG, ABS, or ASA (Do NOT use PLA, it will creep under screw tension).
Walls/Perimeters: 5 to 6 walls.
Infill: 40% Gyroid. and 40% gyroid infill for best results
Orientation: Print laying flat on the side (VERY IMPORTANT for layer strength).
