Magnet Depth Gauge – 6/8 mm Magnet Depth & Flush Fit Tester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test Ø6×2, Ø6×3, Ø8×2 and Ø8×3 mm magnets with five depth offsets from -0.2 to +0.2 mm. Quickly find the ideal recessed,
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Find the perfect magnet depth before printing your final part.
The Magnet Depth Gauge is a simple 3D printable calibration tool designed to help you determine the ideal pocket depth for round magnets in your 3D models.
It lets you quickly test whether your magnet will sit recessed, perfectly flush, or slightly proud of the surface before committing to your final print.
The gauge covers four common magnet sizes:
Ø6 × 2 mm
Ø6 × 3 mm
Ø8 × 2 mm
Ø8 × 3 mm
For each magnet size, five depth offsets are available:
-0.2 / -0.1 / 0.0 / +0.1 / +0.2 mm
For example, for a Ø8 × 3 mm magnet, the gauge provides pocket depths of:
2.8 / 2.9 / 3.0 / 3.1 / 3.2 mm
This makes it easy to determine the exact depth that gives you the result you want.
Why use a Magnet Depth Gauge?
A nominal 3 mm magnet does not necessarily require an exactly 3.0 mm deep pocket.
The final result can be affected by:
actual magnet thickness
first-layer and top-surface accuracy
printer calibration
filament behavior
slicer settings
dimensional tolerances
Instead of printing several prototypes, print the gauge using the same printer, filament and settings as your final part, test your magnets, and transfer the best depth directly into your CAD model.
How to use
Print the gauge using the same printing conditions as your final part.
Select your magnet size: 6×2, 6×3, 8×2 or 8×3 mm.
Test the magnet in the five different depth pockets.
Choose whether you want the magnet recessed, flush or proud.
Use the corresponding depth in your CAD model.
Easy magnet removal
Each pocket includes a Ø3 mm through-hole, allowing the magnet to be pushed back out from underneath.
A piece of 1.75 mm filament works perfectly for this.
Features
4 common magnet sizes
Ø6 and Ø8 mm magnets
2 and 3 mm magnet thicknesses
5 depth offsets per size
-0.2 to +0.2 mm
0.1 mm increments
20 test pockets
Ø3 mm magnet removal holes
Compact format
No supports required
Quick print
Hanging hole for workshop storage
Part of the Magnet Gauge series
This model focuses specifically on magnet depth.
For determining the ideal hole diameter and radial clearance, use the Magnet Fit Gauge.
Together, both tools allow you to determine:
Magnet Fit Gauge → ideal hole diameter
Magnet Depth Gauge → ideal pocket depth
Design → Print → Test → Perfect fit!