1 / 3
Magnet Depth Gauge – 6/8 mm Magnet Depth & Flush Fit Tester — image 1
1 / 3

Magnet Depth Gauge – 6/8 mm Magnet Depth & Flush Fit Tester

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Test Ø6×2, Ø6×3, Ø8×2 and Ø8×3 mm magnets with five depth offsets from -0.2 to +0.2 mm. Quickly find the ideal recessed,

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
98
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Find the perfect magnet depth before printing your final part.

The Magnet Depth Gauge is a simple 3D printable calibration tool designed to help you determine the ideal pocket depth for round magnets in your 3D models.

It lets you quickly test whether your magnet will sit recessed, perfectly flush, or slightly proud of the surface before committing to your final print.

The gauge covers four common magnet sizes:

  • Ø6 × 2 mm

  • Ø6 × 3 mm

  • Ø8 × 2 mm

  • Ø8 × 3 mm

For each magnet size, five depth offsets are available:

-0.2 / -0.1 / 0.0 / +0.1 / +0.2 mm

For example, for a Ø8 × 3 mm magnet, the gauge provides pocket depths of:

2.8 / 2.9 / 3.0 / 3.1 / 3.2 mm

This makes it easy to determine the exact depth that gives you the result you want.

Why use a Magnet Depth Gauge?

A nominal 3 mm magnet does not necessarily require an exactly 3.0 mm deep pocket.

The final result can be affected by:

  • actual magnet thickness

  • first-layer and top-surface accuracy

  • printer calibration

  • filament behavior

  • slicer settings

  • dimensional tolerances

Instead of printing several prototypes, print the gauge using the same printer, filament and settings as your final part, test your magnets, and transfer the best depth directly into your CAD model.

How to use

  1. Print the gauge using the same printing conditions as your final part.

  2. Select your magnet size: 6×2, 6×3, 8×2 or 8×3 mm.

  3. Test the magnet in the five different depth pockets.

  4. Choose whether you want the magnet recessed, flush or proud.

  5. Use the corresponding depth in your CAD model.

Easy magnet removal

Each pocket includes a Ø3 mm through-hole, allowing the magnet to be pushed back out from underneath.

A piece of 1.75 mm filament works perfectly for this.

Features

  • 4 common magnet sizes

  • Ø6 and Ø8 mm magnets

  • 2 and 3 mm magnet thicknesses

  • 5 depth offsets per size

  • -0.2 to +0.2 mm

  • 0.1 mm increments

  • 20 test pockets

  • Ø3 mm magnet removal holes

  • Compact format

  • No supports required

  • Quick print

  • Hanging hole for workshop storage

Part of the Magnet Gauge series

This model focuses specifically on magnet depth.

For determining the ideal hole diameter and radial clearance, use the Magnet Fit Gauge.

Together, both tools allow you to determine:

Magnet Fit Gauge → ideal hole diameter
Magnet Depth Gauge → ideal pocket depth

Design → Print → Test → Perfect fit!

Tags