1 / 3
Side-Mount 140 mm / 120 mm Fan Holder for the Modular 10 Inch Server Rack (Reworked) — zdjęcie 1
1 / 3

Side-Mount 140 mm / 120 mm Fan Holder for the Modular 10 Inch Server Rack (Reworked)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-in side-panel brackets that hold a 140 mm (Arctic P14 PST, 27 mm) or 120 mm fan on the side of the Modular 10 Inch

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two clip brackets that hold a 140 mm or 120 mm fan on the side of the Modular 10 Inch Server Rack. They mount in the side-panel slots with M6 hardware and grip the fan frame at its top and bottom edges, so no screws go into the fan and the opening stays clear. Print two, mount one rotated 180°, drop the fan in. Tested with the Arctic P14 PST (140 × 27 mm); files for standard 140 × 25 and 120 × 25 fans included. No supports needed. Requires double-wide rails.

  • fan140x27-holder-tight.stl — Arctic P14 PWM PST / Pro PST (140 × 27 mm). Tested fit in PLA, snug. Print 2. Uses 4U.

  • fan140x27-holder.stl — Same, with extra clearance for PETG/ABS. Print 2. Uses 4U.

  • fan140x25-holder-tight.stl — Standard 140 × 25 mm fans, snug fit. Untested. Print 2. Uses 4U.

  • fan140x25-holder.stl — Standard 140 × 25 mm fans, extra clearance. Untested. Print 2. Uses 4U.

  • fan120x25-holder-tight.stl — Standard 120 × 25 mm fans, snug fit. Untested. Print 2. Uses 3U.

  • fan120x25-holder.stl — Standard 120 × 25 mm fans, extra clearance. Untested. Print 2. Uses 3U.

Tagi