Mini Smart TV ESP32 Desk Display with Weather, Clock and Touch Control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed ESP32 mini smart TV with OLED, weather, clock, mood animations, touch control and rechargeable battery.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This Mini Smart TV is a compact 3D-printed ESP32 desk display designed to combine useful information with a fun animated interface. The project uses a small 0.96-inch OLED display mounted inside a TV-style upper housing, while the ESP32 board, battery, charging module, power electronics, and wiring are placed inside the lower base.
The display can show useful information such as the current time, date, temperature, humidity, and weather conditions using data from the OpenWeather API. It can also display different animated mood faces, giving the project a more interactive and character-like appearance.
A TTP223 capacitive touch sensor is used to control the display without needing a mechanical push button. A short touch can be used to move between the different display pages, while holding the touch sensor for around 2 seconds changes the mood expression. Holding it for approximately 5 seconds can be used to enter the Wi-Fi and API configuration mode.
The Wi-Fi name, Wi-Fi password, OpenWeather API key, city, and other settings can be entered through a local ESP32 configuration page. Once the settings are saved, they are stored in the ESP32 memory, so they remain available even after the device is switched off or the battery is disconnected. When the device is powered on again, it can automatically reconnect using the previously saved settings.
The enclosure was designed to be easy to 3D print and assemble. The electronics are separated into two main sections: the OLED display is located inside the upper TV-style housing, while the ESP32 and power system are protected inside the larger base. Wires between the display and the ESP32 can be routed internally through the support between the two sections.
The project can be powered using a 3.7V lithium-ion battery together with a charging and 5V boost module. An ON/OFF switch can also be added to the enclosure for convenient power control.
Main Features
ESP32-based smart desk display
0.96-inch I2C OLED display
Current time and date
Live weather information
Temperature and humidity display
OpenWeather API integration
Animated mood faces
TTP223 capacitive touch control
Short touch for page navigation
2-second hold for changing mood
5-second hold for Wi-Fi/API setup
Wi-Fi credentials stored in ESP32 memory
Automatic reconnection after power cycling
Battery-powered design
3.7V Li-ion battery support
Charging and 5V boost module
ON/OFF power switch
Fully 3D-printable enclosure
Separate display and electronics compartments
Compact desktop design
Electronics Used
ESP32 Development Board
0.96-inch I2C OLED Display
TTP223 Capacitive Touch Sensor
3.7V Lithium-ion Battery
3.7V Recycled Vape Battery
See the link below for how to extract and reuse it safely
Lithium Battery Charging / 5V Boost Module
ON/OFF Switch
Connecting Wires
Code
The complete ESP32 code, including the OLED interface, Wi-Fi configuration, weather API integration, touch control, clock, date, and mood functions, is available at the link below:
Code:
https://bambu3design.com/esp32-oled-smart-display-with-weather-touch/
Assembly Tutorial
For the complete assembly process, wiring, ESP32 setup, OLED installation, touch sensor connection, and final testing, you can watch the full tutorial on YouTube:
YouTube Assembly Tutorial:
If you build this project, feel free to share your make. I would love to see your version and any modifications you add to the design.